The merit of using silicon for the development of hearing aid microphones and intraocular pressure sensors

An important design rule for a hearing aid is the requirement of a large signal to noise ratio, which is mainly determined by that of the microphone and its preamplifier. It will be shown that in order to increase the signal to noise ratio it is favourable to integrate the preamplifier with the microphone, which implies that the microphone should be made of silicon, preferably with a single wafer technology. For the development of a tonometer for the measurement of intraocular pressure, the application of a silicon force sensor rationalizes that also the flattening of the eye globe is measured with a silicon applanation sensor, instead of by optical means which is the present practice. A sensor construction has been developed, which combines a force, pressure and applanation sensor, all made in silicon.

[1]  P. R. Scheeper,et al.  A silicon condenser microphone: Materials and technology , 1993 .

[2]  J. A. Voorthuyzen,et al.  Investigation of attractive forces between PECVD silicon nitride microstructures and an oxidized silicon substrate , 1992 .

[3]  A. J. Sprenkels,et al.  Development of an electret microphone in silicon , 1989 .

[4]  P. Bergveld,et al.  A new tonometer based on the application of micro-mechanical sensors , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[5]  Piet Bergveld,et al.  General considerations of noise in microphone preamplifiers , 1990 .

[6]  J. A. Voorthuyzen,et al.  Investigations of the surface conductivity of silicon dioxide and methods to reduce it , 1987 .

[7]  P Bergveld,et al.  Optimal design of an electret microphone metal-oxide-semiconductor field-effect transistor preamplifier. , 1992, The Journal of the Acoustical Society of America.

[8]  Wouter Olthuis,et al.  The design, fabrication, and testing of corrugated silicon nitride diaphragms , 1994 .

[9]  Piet Bergveld,et al.  A positioning sensor for tonometric applications , 1992 .

[10]  Wouter Olthuis,et al.  Improvement of the performance of microphones with a silicon nitride diaphragm and backplate , 1994 .

[11]  A.G.H. van der Donk.  A silicon condenser microphone: modelling and electronic circuitry , 1992 .

[12]  Wouter Olthuis,et al.  A silicon condenser microphone with a silicon nitride diaphragm and backplate , 1992 .

[13]  Wouter Olthuis,et al.  Fabrication of silicon condenser microphones using single wafer technology , 1992 .