Intraoral low-temperature degradation of monolithic zirconia dental prostheses: Results of a prospective clinical study with ex vivo monitoring.

[1]  G. Pezzotti,et al.  Does artificial aging correctly predict the long-term in-vivo degradation behavior in zirconia hip prostheses? , 2020, Bio-medical materials and engineering.

[2]  W. Müller,et al.  High-translucent yttria-stabilized zirconia ceramics are wear-resistant and antagonist-friendly. , 2019, Dental materials : official publication of the Academy of Dental Materials.

[3]  C. Wulfman,et al.  Clinical behavior of second-generation zirconia monolithic posterior restorations: Two-year results of a prospective study with Ex vivo analyses including patients with bruxism clinical signs. , 2019, Journal of dentistry.

[4]  W. Browne,et al.  Phase transformation and fracture load of stock and CAD/CAM-customized zirconia abutments after 1 year of clinical function. , 2019, Clinical oral implants research.

[5]  J. Chevalier,et al.  Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications. , 2018, Dental materials : official publication of the Academy of Dental Materials.

[6]  M. Øilo,et al.  Monolithic zirconia crowns in the aesthetic zone in heavy grinders with severe tooth wear - An observational case-series. , 2018, Journal of dentistry.

[7]  B. Lawn,et al.  Novel Zirconia Materials in Dentistry , 2018, Journal of dental research.

[8]  T. Oberbach,et al.  Sub-surface assessment of hydrothermal ageing in zirconia-containing femoral heads for hip joint applications. , 2017, Acta biomaterialia.

[9]  G. Adabo,et al.  The effects of mechanical and hydrothermal aging on microstructure and biaxial flexural strength of an anterior and a posterior monolithic zirconia. , 2017, Journal of dentistry.

[10]  L. Valandro,et al.  Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystalline ceramic after different zirconia surface treatments. , 2017, Materials science & engineering. C, Materials for biological applications.

[11]  R. Souza,et al.  Effect of intra-oral aging on t→m phase transformation, microstructure, and mechanical properties of Y-TZP dental ceramics. , 2017, Journal of the mechanical behavior of biomedical materials.

[12]  Sonny B. Bal,et al.  In Vitro versus In Vivo Phase Instability of Zirconia-Toughened Alumina Femoral Heads: A Critical Comparative Assessment , 2017, Materials.

[13]  M. Litaker,et al.  Dentist material selection for single-unit crowns: Findings from the National Dental Practice-Based Research Network. , 2016, Journal of dentistry.

[14]  A. A. Del Bel Cury,et al.  Fracture Load and Phase Transformation of Monolithic Zirconia Crowns Submitted to Different Aging Protocols. , 2016, Operative dentistry.

[15]  L. Valandro,et al.  Comparison of different low-temperature aging protocols: its effects on the mechanical behavior of Y-TZP ceramics. , 2016, Journal of the mechanical behavior of biomedical materials.

[16]  C. Wulfman,et al.  Aging of monolithic zirconia dental prostheses: Protocol for a 5-year prospective clinical study using ex vivo analyses , 2016, Contemporary clinical trials communications.

[17]  L. Valandro,et al.  Fatigue behavior of Y-TZP ceramic after surface treatments. , 2016, Journal of the mechanical behavior of biomedical materials.

[18]  L. Valandro,et al.  Low-temperature degradation of Y-TZP ceramics: A systematic review and meta-analysis. , 2016, Journal of the mechanical behavior of biomedical materials.

[19]  Tariq F Alghazzawi,et al.  Correlation of flexural strength of coupons versus strength of crowns fabricated with different zirconia materials with and without aging. , 2015, Journal of the American Dental Association.

[20]  P. Major,et al.  In vitro wear behavior of zirconia opposing enamel: a systematic review , 2014, BDJ.

[21]  K. Paraskevopoulos,et al.  Effect of in vitro aging on the flexural strength and probability to fracture of Y-TZP zirconia ceramics for all-ceramic restorations. , 2014, Dental materials : official publication of the Academy of Dental Materials.

[22]  N. Lawson,et al.  Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing. , 2014, Journal of dentistry.

[23]  M. Bottino,et al.  Effects of aging procedures on the topographic surface, structural stability, and mechanical strength of a ZrO2-based dental ceramic. , 2014, Dental materials : official publication of the Academy of Dental Materials.

[24]  R. Seghi,et al.  Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments. , 2014, The Journal of prosthetic dentistry.

[25]  I. Denry,et al.  Emerging Ceramic-based Materials for Dentistry , 2014, Journal of dental research.

[26]  C. Berthold,et al.  Long-time aging in 3 mol.% yttria-stabilized tetragonal zirconia polycrystals at human body temperature. , 2014, Acta biomaterialia.

[27]  L. Valandro,et al.  Low-temperature degradation of a Y-TZP ceramic after surface treatments. , 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

[28]  P. Sainsot,et al.  Combining ageing and wear to assess the durability of zirconia-based ceramic heads for total hip arthroplasty. , 2013, Acta biomaterialia.

[29]  M. Rosentritt,et al.  Wear performance of monolithic dental ceramics with different surface treatments. , 2013, Quintessence international.

[30]  A. Ramalho,et al.  Effect of feldspar porcelain coating upon the wear behavior of zirconia dental crowns , 2013 .

[31]  J. Geis-Gerstorfer,et al.  Influence of surface treatment on the wear of solid zirconia , 2013, Acta odontologica Scandinavica.

[32]  J. Chevalier,et al.  Comparative ageing behaviour of commercial, unworn and worn 3Y-TZP and zirconia-toughened alumina hip joint heads , 2012 .

[33]  Tariq F Alghazzawi,et al.  Influence of low-temperature environmental exposure on the mechanical properties and structural stability of dental zirconia. , 2012, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[34]  C. Wulfman,et al.  Raman Spectroscopy Evaluation of Subsurface Hydrothermal Degradation of Zirconia , 2012 .

[35]  M. Stiesch,et al.  Low-temperature degradation of different zirconia ceramics for dental applications. , 2012, Acta biomaterialia.

[36]  P. Ammann,et al.  Low temperature degradation of a Y-TZP dental ceramic. , 2011, Acta biomaterialia.

[37]  M. Stiesch,et al.  Influence of hydrothermal and mechanical conditions on the strength of zirconia. , 2010, Acta biomaterialia.

[38]  C. Wulfman,et al.  Interest of Raman spectroscopy for the study of dental material: The zirconia material example , 2010 .

[39]  Vanni Lughi,et al.  Low temperature degradation -aging- of zirconia: A critical review of the relevant aspects in dentistry. , 2010, Dental materials : official publication of the Academy of Dental Materials.

[40]  C. Berthold,et al.  XRD2 micro-diffraction analysis of the interface between Y-TZP and veneering porcelain: role of application methods. , 2010, Dental materials : official publication of the Academy of Dental Materials.

[41]  Sunghuen Kim,et al.  The effect of low temperature aging on the mechanical property & phase stability of Y-TZP ceramics , 2009, The journal of advanced prosthodontics.

[42]  David R. Clarke,et al.  The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends , 2009 .

[43]  M. Swain,et al.  SEM observations of porcelain Y-TZP interface. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[44]  Seiji Ban,et al.  Biaxial flexure strength and low temperature degradation of Ce-TZP/Al2O3 nanocomposite and Y-TZP as dental restoratives. , 2008, Journal of Biomedical Materials Research. Part B - Applied biomaterials.

[45]  F. Gil,et al.  Aging of Retrieved Zirconia Femoral Heads , 2007, Clinical orthopaedics and related research.

[46]  Sylvain Deville,et al.  Low-Temperature Degradation of Zirconia and Implications for Biomedical Implants , 2007 .

[47]  J. Chevalier,et al.  What future for zirconia as a biomaterial? , 2006, Biomaterials.

[48]  J. Chevalier,et al.  A critical comparison of methods for the determination of the aging sensitivity in biomedical grade yttria-stabilized zirconia. , 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

[49]  W. Burger,et al.  Fracture of a Y-TZP ceramic femoral head. Analysis of a fault. , 2004, The Journal of bone and joint surgery. British volume.

[50]  S. Catledge,et al.  Examination of surface and material properties of explanted zirconia femoral heads. , 2004, The Journal of arthroplasty.

[51]  P. Siney,et al.  Wear of ultra-high-molecular-weight polyethylene cup articulating with 22.225 mm zirconia diameter head in cemented total hip arthroplasty , 2004, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[52]  G. Pezzotti,et al.  Raman spectroscopic analysis of phase-transformation and stress patterns in zirconia hip joints. , 2004, Journal of biomedical optics.

[53]  Y. Vohra,et al.  Surface crystalline phases and nanoindentation hardness of explanted zirconia femoral heads , 2003, Journal of materials science. Materials in medicine.

[54]  P. Hernigou,et al.  Zirconia and alumina ceramics in comparison with stainless-steel heads. Polyethylene wear after a minimum ten-year follow-up. , 2003, The Journal of bone and joint surgery. British volume.

[55]  G. Anderson,et al.  Catastrophic failure of the Elite Plus total hip replacement, with a Hylamer acetabulum and Zirconia ceramic femoral head. , 2002, The Journal of bone and joint surgery. British volume.

[56]  N. Sugano,et al.  Phase transformation of a zirconia ceramic head after total hip arthroplasty. , 2001, The Journal of bone and joint surgery. British volume.

[57]  D. Goutallier,et al.  Poor eight-year survival of cemented zirconia-polyethylene total hip replacements. , 1999, The Journal of bone and joint surgery. British volume.

[58]  David R. Clarke,et al.  Measurement of the Crystallographically Transformed Zone Produced by Fracture in Ceramics Containing Tetragonal Zirconia , 1982 .

[59]  K. Kobayashi,et al.  Phase change and mechanical properties of ZrO2-Y2O3 solid electrolyte after ageing , 1981 .

[60]  J. Chevalier,et al.  A testing protocol combining shocks, hydrothermal ageing and friction, applied to Zirconia Toughened Alumina (ZTA) hip implants. , 2017, Journal of the mechanical behavior of biomedical materials.

[61]  A. Kocjan,et al.  The combined effect of alumina and silica co-doping on the ageing resistance of 3Y-TZP bioceramics. , 2015, Acta biomaterialia.

[62]  M. Swain.  Impact of oral fluids on dental ceramics: what is the clinical relevance? , 2014, Dental materials : official publication of the Academy of Dental Materials.

[63]  M. Roos,et al.  Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists. , 2013, Acta odontologica Scandinavica.

[64]  M. Anglada,et al.  Subsurface evaluation of hydrothermal degradation of zirconia , 2011 .

[65]  P. Reynaud,et al.  Phase Transformation in Zirconia Heads after THA Myth or Reality , 2004 .