Validation of X-ray lithography and development simulation system for moving mask deep X-ray lithography

This paper presents a newly developed 3-Dimensional (3-D) simulation system for Moving Mask Deep X-ray Lithography (M/sup 2/DXL) technique, and its validation. The simulation system named X-ray Lithography Simulation System for 3-Dimensional Fabrication (X3D) is tailored to simulate a fabrication process of 3-D microstructures by M/sup 2/DXL. X3D consists of three modules: mask generation, exposure and resist development (hereafter development). The exposure module calculates a dose distribution in resist using an X-ray mask pattern and its movement trajectory. The dose is then converted to a resist dissolution rate. The development module adopted the "Fast Marching Method" technique to calculate the 3-D dissolution process and resultant 3-D microstructures. This technique takes into account resist dissolution direction that is required by 3-D X-ray lithography simulation. The comparison between simulation results and measurements of "stairs-like" dose deposition pattern by M/sup 2/DXL showed that X3D correctly predicts the 3-D dissolution process of exposed PMMA.

[1]  O. Tabata,et al.  Fabrication of 3-dimensional microstructures using moving mask deep X-ray lithography (M/sup 2/DXL) , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[2]  Kyehwan Gil,et al.  A tetrahedral three-facet micro mirror with the inclined deep X-ray process , 2001 .

[3]  Marko Subasic,et al.  Level Set Methods and Fast Marching Methods , 2003 .

[4]  James A. Sethian,et al.  Level Set Methods and Fast Marching Methods , 1999 .

[5]  Zewen Liu,et al.  Resist dissolution rate and inclined-wall structures in deep x-ray lithography , 1998 .

[6]  O. Tabata,et al.  3D fabrication by moving mask deep X-ray lithography (M/sup 2/DXL) with multiple stages , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[7]  Pascal Meyer,et al.  DoseSim: Microsoft-Windows graphical user interface for using synchrotron x-ray exposure and subsequent development in the LIGA process , 2003 .

[8]  Jan G. Korvink,et al.  Process Simulation System for 3D X-Ray Lithography and Development , 2003 .

[9]  Masaru Sasago,et al.  Three-dimensional resist process simulator PEACE (photo and electron beam lithography analyzing computer engineering system) , 1991, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst..

[10]  O. Tabata,et al.  Moving mask LIGA (M/sup 2/LIGA) process for control of side wall inclination , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[11]  S. K. Griffiths.  Fundamental limitations of LIGA x-ray lithography: sidewall offset, slope and minimum feature size , 2004 .

[12]  Paul Isaac Hagouel.  Blazed diffraction gratings fabricated using X-ray lithography: fabrication, modeling and simulation , 2003, Microelectron. Reliab..

[13]  S. Hafizovic,et al.  X3D: 3D X-ray lithography and development simulation for MEMS , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[14]  F. Pantenburg,et al.  Influence of developer temperature and resist material on the structure quality in deep x-ray lithography , 1998 .

[15]  Pascal Meyer,et al.  Investigations of the development rate of irradiated PMMA Microstructures in deep X-ray lithography , 2002 .

[16]  Mumit Khan,et al.  Modeling Image Formation in Layered Structures: Application to X-ray Lithography , 1998 .

[17]  Jürgen Mohr,et al.  Development behaviour of irradiated microstructures , 1997 .

[18]  J. Sethian,et al.  FRONTS PROPAGATING WITH CURVATURE DEPENDENT SPEED: ALGORITHMS BASED ON HAMILTON-JACOB1 FORMULATIONS , 2003 .

[19]  Susumu Sugiyama,et al.  Plain-pattern to cross-section transfer (PCT) technique for deep x-ray lithography and applications , 2004 .

[20]  Stewart K. Griffiths,et al.  PMMA development studies using various synchrotron sources and exposure conditions , 1998, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.