论文信息 - About The Choice of The Reference Magnetic Quantity in Presence of Non Sinusoidal Waverforms

About The Choice of The Reference Magnetic Quantity in Presence of Non Sinusoidal Waverforms

In the paper the problems linked to the choice of the reference magnetic quantity, when electromagnetic devices are supplied by non sinusoidal voltage is analyzed. In particular, the voltage waveforms produced by the two main converters, usually adopted in industrial applications, are taken into account. After a wide discussion the authors suggest the use of the first harmonic flux density peak as reference magnetic quantity.

M. Pastorelli | A. Boglietti | M. Lazzari

[1] Michele Pastorelli,et al. Change of the iron losses with the switching supply frequency in soft magnetic materials supplied by PWM inverter , 1995 .

[2] Francesco Profumo,et al. Energetic Behavior of Soft Magnetic Materials in the Case of Inverter Supply , 1994 .

[3] Francesco Profumo,et al. Iron losses in magnetic materials with six-step and PWM inverter supply (induction motors) , 1991 .

[4] Michele Pastorelli,et al. Iron loss measurements with inverter supply: a first discussion to define a standard methodology , 1995 .

[5] Yoshihiro Murai,et al. Waveform Distortion and Correction Circuit for PWM Inverters with Switching Lag-Times , 1987, IEEE Transactions on Industry Applications.

[6] Francesco Profumo,et al. About The Effects Of Different Modulation Index On The Iron Losses In Soft Magnetic Materials Supplied By Pwm Inverter , 1993 .