Reducing the permanent magnet content in fractional-slot concentrated-windings permanent magnet synchronous machines

The efficiency of permanent magnet synchronous machines is investigated as a function of the mass of magnets used, keeping the power and volume constant. A comparison is made between rare earth (NdFeB) magnets and ferrite magnets. For a given type and amount of magnets, the geometry of the machine is optimized and the efficiency map is computed, taken into account iron loss, copper loss, magnet loss and pulse width modulation loss. The amount of permanent magnet material can be reduced significantly with a minor influence on the efficiency and power density. Furthermore, the machine is optimized for several soft magnetic materials. It is observed that the optimal number of poles is higher for low loss materials, and that the efficiency is up to 5% higher than for the highest loss material. For a motor optimized for ferrite magnets, the minimal magnet thickness for high efficiency is about double compared to NdFeB.

[1]  M. Ubaldini,et al.  HIGH POLE NUMBER, PM SYNCHRONOUS MOTOR WITH CONCENTRATED COIL ARMATURE WINDINGS , 2006 .

[2]  P. Viarouge,et al.  Synthesis of high performance PM motors with concentrated windings , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

[3]  Dae-Gab Gweon,et al.  Modeling of the armature slotting effect in the magnetic field distribution of a linear permanent magnet motor , 2002 .

[4]  D. Howe,et al.  Effect of Axial Segmentation of Permanent Magnets on Rotor Loss in Modular Permanent-Magnet Brushless Machines , 2007, IEEE Transactions on Industry Applications.

[5]  Ayman M. El-Refaie,et al.  Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges , 2010, IEEE Transactions on Industrial Electronics.

[6]  K. Yamazaki,et al.  Loss Investigation of Interior Permanent-Magnet Motors Considering Carrier Harmonics and Magnet Eddy Currents , 2009, IEEE Transactions on Industry Applications.

[7]  J. Pyrhonen,et al.  Comparison between models for eddy-current loss calculations in rotor surface-mounted permanent magnets , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[8]  C. E. Nino-Baron,et al.  Iron and Magnet Losses and Torque Calculation of Interior Permanent Magnet Synchronous Machines Using Magnetic Equivalent Circuit , 2010, IEEE Transactions on Magnetics.

[9]  S. Mezani,et al.  2-D Exact Analytical Model for Surface-Mounted Permanent-Magnet Motors With Semi-Closed Slots , 2011, IEEE Transactions on Magnetics.

[10]  J.A. Ferreira,et al.  Comparison of analytical and Finite Element calculation of eddy-current losses in PM machines , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[11]  D. Stone,et al.  Rotor loss in permanent magnet brushless AC machines , 1999, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272).

[12]  Polinder,et al.  Eddy-current losses in the solid back-iron of permanent magnet machines with concentrated fractional pitch windings , 1988 .

[13]  N. Bianchi,et al.  A General Approach to Determine the Rotor Losses in Three-Phase Fractional-Slot PM Machines , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[14]  Gordon R. Slemon.  On the design of high-performance surface-mounted PM motors , 1994 .

[15]  N. Bianchi,et al.  Design considerations for fractional-slot winding configurations of synchronous machines , 2006, IEEE Transactions on Industry Applications.