Effect of interfacial microstructure evolution on the peeling strength and fracture of AMB Cu-metalized AlN substrate

[1]  R. Gopalan,et al.  Microstructure and heat transfer characteristics of active brazed Ceramic–Metal joints , 2021 .

[2]  Xuhai Liu,et al.  AlN/Cu composite ceramic substrate fabricated using a novel TiN/AgCuTi composite brazing alloy , 2020 .

[3]  W. Tuan,et al.  Interface evaluation on the brazed system of AlN‐Ticusil‐Graphite , 2019, International Journal of Applied Ceramic Technology.

[4]  Shanshan Zhang,et al.  Finite element analysis of the effect of TiC or graphite modified composite fillers on the thermal residual stress of AMB ceramic substrates , 2019, Ceramics International.

[5]  Ji-cai Feng,et al.  Wetting behavior and brazing of titanium‐coated SiC ceramics using Sn0.3Ag0.7Cu filler , 2019, Journal of the American Ceramic Society.

[6]  Shanshan Zhang,et al.  Residual stress and warpage of AMB ceramic substrate studied by finite element simulations , 2019, Microelectronics Reliability.

[7]  A. Shirzadi,et al.  A new method for liquid-phase bonding of copper plates to aluminum nitride (AlN) substrates used in high-power modules , 2019, Journal of Materials Science: Materials in Electronics.

[8]  K. Suganuma,et al.  Thermal Shock Performance of DBA/AMB Substrates Plated by Ni and Ni–P Layers for High-Temperature Applications of Power Device Modules , 2018, Materials.

[9]  Haitao Liu,et al.  Assembly of β‐SiC Nanowires film and humidity sensing performance , 2018, International Journal of Applied Ceramic Technology.

[10]  H. Xu,et al.  Comparative studies on microstructures, strengths and reliabilities of two types of AlN direct bonding copper substrates , 2018, Ceramics International.

[11]  H. Xu,et al.  Experimental and Modeling Studies on the Microstructures and Properties of Oxidized Aluminum Nitride Ceramic Substrates , 2018, Journal of Materials Engineering and Performance.

[12]  Lianmeng Zhang,et al.  High‐speed heteroepitaxial growth of 3C‐SiC (111) thick films on Si (110) by laser chemical vapor deposition , 2018 .

[13]  H. García,et al.  One-Step Preparation of Large Area Films of Oriented MoS2 Nanoparticles on Multilayer Graphene and Its Electrocatalytic Activity for Hydrogen Evolution , 2018, Materials.

[14]  Xiaoguo Song,et al.  Effect of Ti content on the wetting behavior of Sn0.3Ag0.7Cu/AlN system , 2017 .

[15]  Jianke Peng,et al.  Effects of interfacial reaction and atomic diffusion on the mechanical property of Ti3SiC2 ceramic to Cu brazing joints , 2016 .

[16]  C. Pan,et al.  Microstructure and Mechanical Properties of AlN/Cu Brazed Joints , 2014, Journal of Materials Engineering and Performance.

[17]  Hiroshi Sato,et al.  Cyclic Thermal Stress-Induced Degradation of Cu Metallization on Si3N4 Substrate at −40°C to 300°C , 2014, Journal of Electronic Materials.

[18]  M. Singh,et al.  Characterization of silicon carbide joints fabricated using SiC particulate-reinforced Ag–Cu–Ti alloys , 2013 .

[19]  J. Martínez-Fernández,et al.  Microstructural and Mechanical Evaluation of a Cu-Based Active Braze Alloy to Join Silicon Nitride Ceramics , 2011 .

[20]  K. Watari,et al.  High‐Thermal‐Conductivity AlN Filler for Polymer/Ceramics Composites , 2009 .

[21]  Leo J. Schowalter,et al.  Large-area AlN substrates for electronic applications: An industrial perspective , 2008 .

[22]  Jun Li,et al.  High Thermal Conductivity Aluminum Nitride Substrates Prepared by Aqueous Tape Casting , 2006 .

[23]  Omar M. Knio,et al.  Investigating the effect of applied pressure on reactive multilayer foil joining , 2004 .

[24]  Jürgen Schulz-Harder,et al.  Advantages and new development of direct bonded copper substrates , 2003, Microelectron. Reliab..

[25]  K. Watari.  High Thermal Conductivity Non-Oxide Ceramics , 2001 .

[26]  R. Drew,et al.  Direct bonding of copper to aluminum nitride , 1996 .

[27]  J. Qu,et al.  Brazing Si3N4 ceramic to AISI 5140 steel under pressure , 1996 .

[28]  T. Hirai,et al.  Non-stoichiometry of titanium nitride plates prepared by chemical vapour deposition , 1993 .

[29]  R. Lee.  Development of High Thermal Conductivity Aluminum Nitride Ceramic , 1991 .

[30]  Ronald E. Loehman,et al.  Microstructure at the interface between AIN and a Ag–Cu–Ti braze alloy , 1990 .

[31]  S. Winzer,et al.  Liquid‐Phase Sintering of Aluminum Nitride by Europium Oxide Additives , 1989 .

[32]  W. J. Knapp,et al.  Delayed Fracture of an Alumina Ceramic , 1977 .