Level set method for microfabrication simulations

The article describes application of Level Set method for two different microfabrication processes. First is shape evolution of during reflow of the glass structure. Investigated problem were approximated by viscous flow of material thus kinetics of the process were known from physical model. Second problem is isotropic wet etching of silicon. Which is much more complicated because dynamics of the shape evolution is strongly coupled with time and geometry shapes history. In etching simulations Level Set method is coupled with Finite Element Method (FEM) that is used for calculation of etching acid concentration that determine geometry evolution of the structure. The problem arising from working with FEM with time varying boundaries was solved with the use of the dynamic mesh technique employing the Level Set formalism of higher dimensional function for geometry description. Isotropic etching was investigated in context of mico-lenses fabrication. Model was compared with experimental data obtained in etching of the silicon moulds used for micro-lenses fabrication.

[1]  David G. Grier,et al.  Nanofabrication with holographic optical tweezers , 2002 .

[2]  Mohamed Gad-el-Hak,et al.  MEMS : Design and Fabrication , 2005 .

[3]  Hugo Thienpont,et al.  Fabrication of spherical microlenses by a combination of isotropic wet etching of silicon and molding techniques. , 2009, Optics express.

[4]  Ronald Fedkiw,et al.  A Crystalline, Red Green Strategy for Meshing Highly Deformable Objects with Tetrahedra , 2003, IMR.

[5]  J. Z. Zhu,et al.  The finite element method , 1977 .

[6]  H. Ottevaere,et al.  Si moulds for glass and polymer microlenses replication , 2008, SPIE Photonics Europe.

[7]  Ian M. Mitchell.  The Flexible, Extensible and Efficient Toolbox of Level Set Methods , 2008, J. Sci. Comput..

[8]  Ronald Fedkiw,et al.  Level set methods and dynamic implicit surfaces , 2002, Applied mathematical sciences.

[9]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[10]  Bertram Schwartz,et al.  Chemical Etching of Silicon II . The System , , , and , 1960 .

[11]  E. Rouy,et al.  A viscosity solutions approach to shape-from-shading , 1992 .

[12]  Hk Hendrik Kuiken,et al.  A mathematical model for wet-chemical diffusion-controlled mask etching through a circular hole , 2003 .

[13]  B. Schwartz,et al.  Chemical Etching of Silicon III . A Temperature Study in the Acid System , 1961 .

[14]  Vadakke Matham Murukeshan,et al.  A fixed-grid approach for diffusion- and reaction-controlled wet chemical etching , 2005 .

[15]  Hugo Thienpont,et al.  Matrixes of unconventional micro-optical components molded with etched silicon , 2010 .

[16]  J. A. Sethian,et al.  HYPERSURFACES MOVING WITH CURVATURE-DEPENDENT SPEED: HAMILTON-JACOBI EQUATIONS, CONSERVATION LAWS AND NUMERICAL ALGORITHMS , 1989 .

[17]  Alex M. Andrew,et al.  Level Set Methods and Fast Marching Methods: Evolving Interfaces in Computational Geometry, Fluid Mechanics, Computer Vision, and Materials Science (2nd edition) , 2000 .

[18]  B. Schwartz,et al.  CHEMICAL ETCHING OF SILICON. IV. ETCHING TECHNOLOGY , 1977 .

[19]  F. Vermolen,et al.  Review on some Stefan Problems for Particle Dissolution in Solid Metallic Alloys , 2005 .

[20]  Per-Olof Persson,et al.  A Simple Mesh Generator in MATLAB , 2004, SIAM Rev..

[21]  X. Ma,et al.  The rapid preparation of large-scale CdS opal photonic crystals and study of the optical properties , 2006 .

[22]  J. Happel,et al.  Low Reynolds number hydrodynamics , 1965 .

[23]  R. Tjerkstra,et al.  Isotropic etching of silicon in fluoride containing solutions as a tool for micromachining , 1999 .