On-Board Pneumatic Pressure Generation Methods for Soft Robotics Applications

The design and construction of a soft robot are challenging tasks on their own. When the robot is supposed to operate without a tether, it becomes even more demanding. While a tethered operation is sufficient for a stationary use, it is impractical for wearable robots or performing tasks that demand a high mobility. Choosing and implementing an on-board pneumatic pressure source are particularly complex tasks. There are several different pressure generation methods to choose from, each with very different properties and ways of implementation. This review paper is written with the intention of informing about all pressure generation methods available in the field of soft robotics and providing an overview of the abilities and properties of each method. Nine different methods are described regarding their working principle, pressure generation behavior, energetic considerations, safety aspects, and suitability for soft robotics applications. All presented methods are evaluated in the most important categories for soft robotics pressure sources and compared to each other qualitatively and quantitatively as far as possible. The aim of the results presented is to simplify the choice of a suitable pressure generation method when designing an on-board pressure source for a soft robot.

[1]  Xin Chen,et al.  Soft Mobile Robots with On-Board Chemical Pressure Generation , 2011, ISRR.

[2]  A.A. Norton,et al.  Pneumatic microactuator powered by the deflagration of sodium azide , 2006, Journal of Microelectromechanical Systems.

[3]  康一 鈴森,et al.  フレキシブルマイクロアクチュエータに関する研究 : 第2報, 三自由度アクチュエータの動特性 , 1990 .

[4]  Wendelin J. Stark,et al.  3D printed lost-wax casted soft silicone monoblocks enable heart-inspired pumping by internal combustion , 2014 .

[5]  Jonathan L. Scott,et al.  Occupational hazards of carbon dioxide exposure , 2009 .

[6]  Mitsuru Sato,et al.  Development of a soft metal hydride actuator using a laminate bellows for rehabilitation systems , 2009 .

[7]  Robert J. Wood,et al.  An untethered jumping soft robot , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Kwang J. Kim,et al.  Experimental study of a metal hydride driven braided artificial pneumatic muscle , 2009 .

[9]  Wendelin J. Stark,et al.  Design, Performance and Reinforcement of Bearing-Free Soft Silicone Combustion-Driven Pumps , 2014 .

[10]  Robert J. Wood,et al.  A 3D-printed, functionally graded soft robot powered by combustion , 2015, Science.

[11]  Daniela Rus,et al.  Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators. , 2014, Soft robotics.

[12]  H. Tsukagoshi,et al.  DEVELOPMENT OF A PORTABLE PNEUMATIC POWER SOURCE USING PHASE TRANSITION AT THE TRIPLE POINT , 2005 .

[13]  Robert J. Wood,et al.  Pneumatic Energy Sources for Autonomous and Wearable Soft Robotics , 2014 .

[14]  Ato Kitagawa,et al.  Development and testing of a novel portable pneumatic power source using phase transition at the triple point , 2009 .

[15]  Bei Wang,et al.  Design and Realization of the Claw Gripper System of a Climbing Robot , 2018, J. Intell. Robotic Syst..

[16]  ZatopaAlex,et al.  Fully Soft 3D-Printed Electroactive Fluidic Valve for Soft Hydraulic Robots. , 2018 .

[17]  Cecilia Laschi,et al.  Soft robotics: a bioinspired evolution in robotics. , 2013, Trends in biotechnology.

[18]  Michael Goldfarb,et al.  Design and energetic characterization of a liquid-propellant-powered actuator for self-powered robots , 2003 .

[19]  Robert J. Wood,et al.  A Soft Combustion-Driven Pump for Soft Robots , 2014 .

[20]  Robert J. Wood,et al.  A Resilient, Untethered Soft Robot , 2014 .

[21]  LoepfeMichael,et al.  An Untethered, Jumping Roly-Poly Soft Robot Driven by Combustion , 2015 .

[22]  M. Wehner,et al.  Experimental characterization of components for active soft orthotics , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[23]  Kyung-Soo Kim,et al.  Application of chemical reaction based pneumatic power generator to robot finger , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[24]  MajidiCarmel,et al.  Soft Robotics: A Perspective—Current Trends and Prospects for the Future , 2014 .

[25]  Filip Ilievski,et al.  Multigait soft robot , 2011, Proceedings of the National Academy of Sciences.

[26]  M. Goldfarb,et al.  Design, control, and energetic characterization of a solenoid-injected monopropellant-powered actuator , 2006, IEEE/ASME Transactions on Mechatronics.

[27]  Lingfeng Chen,et al.  Soft Robotics: Academic Insights and Perspectives Through Bibliometric Analysis , 2018, Soft robotics.

[28]  Stephen A. Morin,et al.  Using explosions to power a soft robot. , 2013, Angewandte Chemie.

[29]  Manabu Chikai,et al.  Application of metal hydride paper to simple pressure generator for use in soft actuator systems , 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

[30]  Cagdas D. Onal,et al.  Towards a Self-contained Soft Robotic Fish: On-Board Pressure Generation and Embedded Electro-permanent Magnet Valves , 2012, ISER.

[31]  B. Mosadegh,et al.  Integrated Elastomeric Components for Autonomous Regulation of Sequential and Oscillatory Flow Switching in Microfluidic Devices , 2010, Nature physics.

[32]  Grant Kennedy,et al.  High-Power Propulsion Strategies for Aquatic Take-off in Robotics , 2015, ISRR.

[33]  George M. Whitesides,et al.  A soft, bistable valve for autonomous control of soft actuators , 2018, Science Robotics.

[34]  M. Hirscher,et al.  Metal hydride materials for solid hydrogen storage: a review , 2007 .

[35]  Shuichi Wakimoto,et al.  New mobile pressure control system for pneumatic actuators, using reversible chemical reactions of water , 2013 .

[36]  Qingsong Wang,et al.  Thermal runaway caused fire and explosion of lithium ion battery , 2012 .

[37]  Wendelin J. Stark,et al.  Contrast Agent Incorporation into Silicone Enables Real‐Time Flow‐Structure Analysis of Mammalian Vein‐Inspired Soft Pumps , 2015 .

[38]  Robert J. Wood,et al.  An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.

[39]  康一 鈴森,et al.  フレキシブルマイクロアクチュエータに関する研究 : 第1報,3自由度アクチュエータの静特性 , 1989 .

[40]  Cagdas D. Onal,et al.  System-level challenges in pressure-operated soft robotics , 2016, Defense + Security.

[41]  Koichi Suzumori,et al.  Untethered three-arm pneumatic robot using hose-free pneumatic actuator , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[42]  Ian D. Walker,et al.  Soft robotics: Biological inspiration, state of the art, and future research , 2008 .

[43]  S. Lamm,et al.  Human Health Effects of Sodium Azide Exposure: A Literature Review and Analysis , 2003, International journal of toxicology.

[44]  Manabu Okui,et al.  Hybrid Pneumatic Source Based on Evaluation of Air Compression Methods for Portability , 2018, IEEE Robotics and Automation Letters.

[45]  D. Floreano,et al.  Soft Robotic Grippers , 2018, Advanced materials.

[46]  Hideyuki Tsukagoshi,et al.  Development of a Novel Pneumatic Power Assisted Lower Limb for Outdoor Walking by the Use of a Portable Pneumatic Power Source , 2007, 2007 IEEE International Conference on Control Applications.

[47]  Diego Lisbona,et al.  A review of hazards associated with primary lithium and lithium-ion batteries , 2011 .

[48]  D. Rus,et al.  Design, fabrication and control of soft robots , 2015, Nature.

[49]  Manabu Okui,et al.  A pneumatic power source using a sodium bicarbonate and citric acid reaction with pressure booster for use in mobile devices , 2017, 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).