Fabrication of highly porous TiAl_3 intermetallics using titanium hydride as a reactant in the thermal explosion reaction

<jats:p><jats:fig position="anchor"><jats:graphic xmlns:xlink="http://www.w3.org/1999/xlink" orientation="portrait" mime-subtype="jpeg" mimetype="image" position="float" xlink:type="simple" xlink:href="S0884291418002935_figAb" /></jats:fig></jats:p>

[1]  Xiaohong Wang,et al.  Porous TiAl3 intermetallics with symmetrical graded pore-structure fabricated by leaching space holder and thermal explosion process , 2018 .

[2]  X. Jiao,et al.  Fe-Al intermetallic foam with porosity above 60 % prepared by thermal explosion , 2018 .

[3]  Xionggang Lu,et al.  Direct production of TiAl3 from Ti/Al-containing oxides precursors by solid oxide membrane (SOM) process , 2017 .

[4]  F. Akhtar,et al.  Aluminium matrix tungsten aluminide and tungsten reinforced composites by solid-state diffusion mechanism , 2017, Scientific Reports.

[5]  Wooyoung Lee,et al.  A novel method to fabricate reinforced Ti composites by infiltration of Al (Mg) into porous titanium , 2017 .

[6]  N. Park,et al.  Effect of Cr and Nb on the phase transformation and pore formation of Ti-Al base alloys , 2017 .

[7]  Xiaohong Wang,et al.  Hierarchical porous TiAl3 intermetallics synthesized by thermal explosion with a leachable space-holder material , 2016 .

[8]  P. Yu,et al.  Effects of cold compacting pressure on the expansion behavior of Ti-48Al during sintering , 2016 .

[9]  C. Yeh,et al.  Use of TiH2 as a reactant in combustion synthesis of porous Ti5Si3 and Ti5Si3/TiAl intermetallics , 2016 .

[10]  Q. Peng,et al.  Porous TiAl alloys fabricated by sintering of TiH2 and Al powder mixtures , 2016 .

[11]  Xiaohong Wang,et al.  Highly porous open cellular TiAl-based intermetallics fabricated by thermal explosion with space holder process , 2016 .

[12]  S. Iyengar,et al.  Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures , 2015, Journal of Thermal Analysis and Calorimetry.

[13]  T. Durejko,et al.  Porous graded FeAl intermetallic foams fabricated by sintering process using NaCl space holders , 2015 .

[14]  Y. Ge,et al.  Synthesis, microstructure and properties of Ti–Al porous intermetallic compounds prepared by a thermal explosion reaction , 2015 .

[15]  Zhihui Zhang,et al.  Reaction behavior of TiC/Cu composite via thermal explosion reaction (TE) under Ar and air atmosphere , 2015 .

[16]  Zi-kui Liu,et al.  Reaction behavior and pore formation mechanism of TiAl–Nb porous alloys prepared by elemental powder metallurgy , 2014 .

[17]  Qingyou Han,et al.  Fabrication of in situ Al3Ti/Al composites by using ultrasound assisted direct reaction between solid Ti powders and liquid Al , 2013 .

[18]  M. Ohno,et al.  On the kinetics of TiAl3 intermetallic layer formation in the titanium and aluminum diffusion couple , 2013 .

[19]  H. Cui,et al.  Unique microstructure of porous NiAl intermetallic compound prepared by combustion synthesis , 2012, Journal of Porous Materials.

[20]  B. Xiao,et al.  Formation mechanism of in situ Al3Ti in Al matrix during hot pressing and subsequent friction stir processing , 2011 .

[21]  N. Xu,et al.  Effects of the Al content on pore structures of porous Ti–Al alloys , 2008 .

[22]  Yao Jiang,et al.  Fabrication of Ti–Al Micro/ Nanometer‐Sized Porous Alloys through the Kirkendall Effect , 2007 .

[23]  J. Jokisaari,et al.  Microwave activated combustion synthesis of titanium aluminides , 2005 .

[24]  A. Kennedy,et al.  The decomposition behavior of as-received and oxidized TiH2 foaming-agent powder , 2003 .

[25]  D. Miracle,et al.  The influence of Zr alloying on the structure and properties of Al 3 Ti , 2003 .

[26]  Irena Gotman,et al.  Ti2AlC ternary carbide synthesized by thermal explosion , 2002 .

[27]  Jian Sun,et al.  Microstructure and mechanical behavior of a multiphase Al3Ti-based intermetallic alloy , 2000 .

[28]  K. Hashimoto,et al.  Environmental effect on mechanical properties of TiAl base alloys , 1993 .