A Study on Passive Cooling in Subsea Power Electronics

This paper proposes a simplified approach to model the thermal behavior of the insulated-gate bipolar transistors (IGBTs) in a subsea power electronic converter. The models are based on empirical relations for natural convection in water, and IGBT datasheet values. The proposed model can be used in the design of subsea converters and in the reliability analysis of their IGBTs. Experimental results are provided to validate the proposed thermal model. Suggestions are made to minimize the net thermal resistance by introducing a high conductivity thermal material as a mounting plate between the IGBT and the cabinet walls. Impact of the mounting plate dimensions and material properties on the junction temperature of the IGBTs is studied. A case study analysis is made on a 100-kVA converter. Results indicate that the thermal spreading resistances in the mounting plate and the cabinet walls contribute significantly to the overall thermal resistance. Spreading resistances can be mitigated by appropriate design measures. Furthermore, it was observed that the passive cooling in water is not as effective as the forced water cooling. However, the low cost, simple design, and higher reliability of passive cooling systems might make them a favorable choice for subsea systems.

[1]  J. Marcelo Gutierrez-Alcaraz,et al.  Seawater based cold plate for power electronics , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[2]  Ke Ma,et al.  Lifetime Comparison of Power Semiconductors in Three-Level Converters for 10-MW Wind Turbine Systems , 2018, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[3]  F. Blaabjerg,et al.  Transient modelling of loss and thermal dynamics in power semiconductor devices , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[4]  Amiel B. Sanfiorenzo.  Cooling system design tool for rapid development and analysis of chilled water systems aboard U.S. Navy surface ships , 2013 .

[5]  Juergen Schulz-Harder.  Review on Highly Integrated Solutions for Power Electronic Devices , 2008 .

[6]  K. W. Tou,et al.  Experimental study of transient natural convection heat transfer from simulated electronic chips , 2005 .

[7]  Milan M. Jovanovic,et al.  Design and analysis of thermal management for high-power-density converters in sealed enclosures , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[8]  K. N. Seetharamu,et al.  Convection Heat Transfer , 2005 .

[9]  Kaushik Rajashekara,et al.  Power electronics for subsea systems: Challenges and opportunities , 2017, 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS).

[10]  Roshan Jeet Jee Jachuck,et al.  Integrated thermal management techniques for high power electronic devices , 2004 .

[11]  尾添 紘之,et al.  Natural Convection セッション , 1998 .

[12]  Dawei Xiang,et al.  An Industry-Based Survey of Reliability in Power Electronic Converters , 2011, IEEE Transactions on Industry Applications.

[13]  Marco Liserre,et al.  Review of active thermal and lifetime control techniques for power electronic modules , 2014, 2014 16th European Conference on Power Electronics and Applications.

[14]  D. Lahaye,et al.  Electrical generators for maritime application , 2011, 2011 International Conference on Electrical Machines and Systems.

[15]  T. Hazel,et al.  Taking Power Distribution Under the Sea: Design, Manufacture, and Assembly of a Subsea Electrical Distribution System , 2013, IEEE Industry Applications Magazine.

[16]  D. Gray,et al.  The validity of the boussinesq approximation for liquids and gases , 1976 .

[17]  Cooling of Vertical Shrouded-Fin Arrays of Rectangular Profile by Natural Convection: An Experimental Study , 1991 .

[18]  S.O. Faried,et al.  Subsea Cable Applications in Electrical Submersible Pump Systems , 2009, IEEE Transactions on Industry Applications.

[19]  Jonathan Shek,et al.  Modelling and Control of Tidal Energy Conversion Systems with Long Distance Converters , 2014 .

[20]  Wai Ming To,et al.  Numerical simulation of buoyant, turbulent flow—I. Free convection along a heated, vertical, flat plate , 1986 .

[21]  Ke Ma.  Electro-Thermal Model of Power Semiconductors Dedicated for Both Case and Junction Temperature Estimation , 2015 .

[22]  Frede Blaabjerg,et al.  Design for reliability of power electronic systems , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[23]  A. Demuren,et al.  Buoyancy-Driven Flows—Beyond the Boussinesq Approximation , 2009 .

[24]  S. Churchill,et al.  Correlating equations for laminar and turbulent free convection from a vertical plate , 1975 .

[25]  S. S. Kang.  Advanced Cooling for Power Electronics , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).

[26]  C. Bailey,et al.  Real-time life expectancy estimation in power modules , 2008, 2008 2nd Electronics System-Integration Technology Conference.

[27]  M. Yovanovich,et al.  Modeling of natural convection in electronic enclosures , 2004, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).

[28]  H. Polinder,et al.  A review of tidal current turbine technology: Present and future , 2017 .

[29]  Guoqi Zhang,et al.  Thermal Management on IGBT Power Electronic Devices and Modules , 2018, IEEE Access.

[30]  A. von Jouanne,et al.  Filtering techniques to minimize the effect of long motor leads on PWM inverter fed AC motor drive systems , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[31]  Pedro Rodriguez,et al.  Electro-thermal modeling for junction temperature cycling-based lifetime prediction of a press-pack IGBT 3L-NPC-VSC applied to large wind turbines , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[32]  J. Balti,et al.  Natural convection in an asymmetrically heated vertical channel with an adiabatic auxiliary plate , 2013 .

[33]  Peter Tavner,et al.  Condition Monitoring for Device Reliability in Power Electronic Converters: A Review , 2010, IEEE Transactions on Power Electronics.

[34]  M. Yovanovich,et al.  Thermal Spreading Resistance of Eccentric Heat Sources on Rectangular Flux Channels , 2000, Heat Transfer: Volume 4.

[35]  Chun-Lien Su,et al.  An Energy-Savings Evaluation Method for Variable-Frequency-Drive Applications on Ship Central Cooling Systems , 2014, IEEE Transactions on Industry Applications.