A SKELETAL KINETIC MECHANISM FOR PRF COMBUSTION IN HCCI ENGINES

Abstract A single zone thermodynamic model, coupled to a kinetic mechanism, is developed and is capable of predicting the ignition timing of Primary Reference Fuels (PRFs) in a Homogeneous Charge Compression Ignition (HCCI) engine. A new combination of kinetic mechanisms is used, which includes 120 reactions and 58 species for both ignition and high temperature reactions. The model is validated using a step by step methodology. The validation compares ignition delays predicted by the model with published measurements from a rapid compression machine, shock tube as well as the cylinder pressure histories taken from two different experimental HCCI engines for various operating conditions. The model is able to qualitatively predict the effect of different parameters such as gas temperature, gas pressure, equivalence ratio and octane number on the HCCI ignition delay.

[1]  Ronald K. Hanson,et al.  Shock tube determination of ignition delay times in full-blend and surrogate fuel mixtures , 2004 .

[2]  Weiying Yang,et al.  A Skeletal Chemical Kinetic Model for the HCCI Combustion Process , 2002 .

[3]  O. Haidn,et al.  Modeling of n-Heptane and Iso-Octane Oxidation in Air , 2003 .

[4]  S. H. Jo,et al.  Active Thermo-Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines , 1979 .

[5]  A. Burcat,et al.  Third millenium ideal gas and condensed phase thermochemical database for combustion (with update from active thermochemical tables). , 2005 .

[6]  C. Westbrook,et al.  A Comprehensive Modeling Study of n-Heptane Oxidation , 1998 .

[7]  Zoran Filipi,et al.  New Heat Transfer Correlation for an HCCI Engine Derived from Measurements of Instantaneous Surface Heat Flux , 2004 .

[8]  D. Foster,et al.  Compression-Ignited Homogeneous Charge Combustion , 1983 .

[9]  C. Westbrook,et al.  Detailed and global chemical kinetics model for hydrogen , 1995 .

[10]  C. Westbrook,et al.  A Comprehensive Modeling Study of iso-Octane Oxidation , 2002 .

[11]  Scott B. Fiveland,et al.  A Four-Stroke Homogeneous Charge Compression Ignition Engine Simulation for Combustion and Performance Studies , 2000 .

[12]  Charles Robert Koch,et al.  The effect of fuel octane and dilutent on homogeneous charge compression ignition combustion , 2005 .

[13]  Kevin J. Hughes,et al.  A unified approach to the reduced kinetic modeling of alkane combustion , 1994 .

[14]  James C. Keck,et al.  Rapid compression machine measurements of ignition delays for primary reference fuels , 1990 .

[15]  James C. Keck,et al.  Autoignition of adiabatically compressed combustible gas mixtures , 1987 .

[16]  A. Burcat Thermochemical Data for Combustion Calculations , 1984 .

[17]  Shigeyuki Tanaka,et al.  A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine , 2003 .

[18]  E. M. Bulewicz Combustion , 1964, Nature.

[19]  J. Warnatz Hydrocarbon oxidation high-temperature chemistry , 2000 .

[20]  I. Glassman 4 – Flame Phenomena in Premixed Combustible Gases , 1996 .

[21]  G. Woschni A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine , 1967 .

[22]  Hua Zhao,et al.  Innovative Ultra-low NOx Controlled Auto-Ignition Combustion Process for Gasoline Engines: the 4-SPACE Project , 2000 .

[23]  M. D. Checkel,et al.  Computerized knock detection from engine pressure records , 1986 .

[24]  Robert W. Dibble,et al.  A Multi-Zone Model for Prediction of HCCI Combustion and Emissions , 2000 .

[25]  W. Kordylewski,et al.  Experimental and numerical studies of ditertiary butyl peroxide combustion at high pressures in a rapid compression machine , 1993 .

[26]  D. L. Miller,et al.  Development of a Reduced Chemical Kinetic Model for Prediction of Preignition Reactivity and Autoignition of Primary Reference Fuels , 1996 .

[27]  L. Kirsch,et al.  The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical model , 1977 .