Improved design of large wind turbine blade of fibre composites based on studies of scale effects (Phase 1) - Summary Report

Materials Research Department, Riso National Laboratory, 4000 Roskilde, Denmark *Wind Energy Department, Riso National Laboratory, 4000 Roskilde, Denmark Department of Solid Mechanics, The Technical University of Denmark, 2800 Lyngby, Denmark, Present adress: Department of Building Technology and Structural Engineering, Aalborg University, 9000 Aalborg, Denmark ¤ LM Glasfiber A/S, Rolls Mollevej 1, 6640 Lunderskov, Denmark Vestas Wind Systems A/S, E. F. Jacobsens Vej 7, 6950 Ringkobing, Denmark

[1]  Henrik Myhre Jensen,et al.  Models of failure in compression of layered materials , 1999 .

[2]  Ivindra Pane,et al.  Plane strain bifurcation and its relation to kinkband formation in layered materials , 2004 .

[3]  Anthony G. Evans,et al.  The characterization of telephone cord buckling of compressed thin films on substrates , 2002 .

[4]  Henrik Myhre Jensen,et al.  Residual stress effects on the compressive strength of uni-directional fibre composites , 2002 .

[5]  Henrik Myhre Jensen,et al.  Kink band formation in fiber reinforced materials , 1997 .

[6]  Henrik Myhre Jensen,et al.  Analysis of compressive failure of layered materials by kink band broadening , 1999 .

[7]  Henrik Myhre Jensen,et al.  Three-dimensional numerical investigation of brittle bond fracture , 2002 .

[8]  I. Sheinman,et al.  Numerical analysis of buckling-driven delamination , 2002 .

[9]  Bent F. Sørensen,et al.  Determination of cohesive laws by the J integral approach , 2003 .

[10]  C. P. Debel,et al.  Identification of damage types in wind turbine blades tested to failure , 2004 .

[11]  Torben K. Jacobsen,et al.  Brudmekanisk karakterisering og design af limsamlinger , 2002 .

[12]  Henrik Myhre Jensen,et al.  Kink band analysis accounting for the microstructure of fiber reinforced materials , 1996 .

[13]  Henrik Myhre Jensen,et al.  Crack initiation and growth in brittle bonds , 2003 .

[14]  Henrik Myhre Jensen.  Compressive Failure of Fibre Reinforced Materials , 2003 .

[15]  Henrik Myhre Jensen,et al.  Cohesive zone modelling of interface fracture near flaws in adhesive joints , 2004 .

[16]  H. Lilholt.  Sustainable natural and polymeric composites -science and technology : proceedings of the 23rd Risø International Symposium on Materials Science, 2-5 September 2002 , 2002 .

[17]  C. P. Debel,et al.  Full scale testing of wind turbine blade to failure - flapwise loading , 2004 .

[18]  Bent F. Sørensen,et al.  Crack bridging in composites: Connecting mechanisms, micromechanics and macroscopic models , 2002 .

[19]  Bent F. Sørensen,et al.  Cohesive law and notch sensitivity of adhesive joints , 2002 .

[20]  Knut O. Ronold,et al.  Calibration of partial safety factors for design of wind-turbine rotor blades against fatigue failure in flapwise bending , 1996 .