Simultaneous multi-product sterilization: Revisited, explored, and optimized

Abstract An interesting potential improvement and challenge in thermal processing of packaged foods is the implementation of simultaneous multi-product sterilization. The aim of this research was to analyze, explore, and optimize simultaneous multi-product sterilization through thermal processing simulation of packaged foods considering both constant (CRT) and variable retort temperature (VRT) profiles. The research was approached through three main tasks, which were defined to discover potential opportunities for simultaneous multi-product sterilization with the attempt to recommend the steps to follow to practically implement it. In most cases, simultaneous multi-product sterilization for CRT processing was feasible, however, it was limited to low retort temperature and restricted to products with similar fh. In contrast, in VRT profiles a higher flexibility for simultaneous multi-product sterilization was found. The opportunity to carry out simultaneous multi-product sterilization provides flexibility to optimize retort utilization, reduce energy consumption, and increase processing plant productivity.

[1]  T. A. Hatton,et al.  Optimal Nutrient Retention during the Thermal Processing of Conduction‐Heated Canned Foods: Application of the Distributed Minimum Principle , 1985 .

[2]  Ekkehard W. Sachs,et al.  Optimal Control of the Sterilization of Prepackaged Food , 1999, SIAM J. Optim..

[3]  T. Durance.  Improving canned food quality with variable retort temperature processes , 1997 .

[4]  Eva Balsa-Canto,et al.  A novel, efficient and reliable method for thermal process design and optimization. Part I: Theory , 2002 .

[5]  Eva Balsa-Canto,et al.  A novel, efficient and reliable method for thermal process design and optimization. Part II: applications , 2002 .

[6]  K. Hayakawa.  Mass Average Value for a Physical, Chemical, or Biological Factor in Food1 , 1971 .

[7]  Cristina L. M. Silva,et al.  Critical evaluation of commonly used objective functions to optimize overall quality and nutrient retention of heat-preserved foods , 1992 .

[8]  J. Torres,et al.  Time-variable retort temperature profiles for cylindrical cans: batch process time, energy consumption, and quality retention model , 1993 .

[9]  Eva Balsa-Canto,et al.  Real time optimization for quality control of batch thermal sterilization of prepackaged foods , 2013 .

[10]  K. P. Sandeep,et al.  Integration of ResonantAcoustic® mixing into thermal processing of foods: A comparison study against other in-container sterilization technologies , 2015 .

[11]  P. Hildenbrand.  AN APPROACH TO SOLVING THE OPTIMAL TEMPERATURE CONTROL PROBLEM FOR STERILIZATION OF CONDUCTION-HEATING FOODS , 1980 .

[12]  H. Ramaswamy,et al.  End-over-end thermal processing of canned vegetables : effect on texture and color , 1994 .

[13]  Ricardo Simpson,et al.  Generation of isolethal processes and implementation of simultaneous sterilisation utilising the revisited general method , 2005 .

[14]  Donald Quentin Kern,et al.  Process heat transfer , 1950 .

[15]  Variability in quality of white and green beans during in-pack sterilization , 2006 .

[16]  A. Abakarov,et al.  Thermal food processing optimization: Algorithms and software , 2013 .

[17]  Robert J. Vanderbei.  Case Studies in Trajectory Optimization: Trains, Planes, and Other Pastimes , 2001 .

[18]  S. Mizrahi,et al.  SIMULATION OF ASCORBIC ACID STABILITY DURING HEAT PROCESSING AND CONCENTRATION OF GRAPEFRUIT JUICE , 1978 .

[19]  J. Vélez-Ruiz,et al.  Evaluation of convective heat transfer coefficient between fluids and particles in suspension as food model systems for natural convection using two methodologies , 2013 .

[20]  Brian W. Kernighan,et al.  AMPL: a mathematical programming language , 1989 .

[21]  Ricardo Simpson,et al.  Energy consumption in batch thermal processing: Model development and validation , 2006 .

[22]  Anubhav Pratap Singh,et al.  Computational techniques used in heat transfer studies on canned liquid-particulate mixtures , 2015 .

[23]  M. Balaban,et al.  NONLINEAR CONSTRAINED OPTIMIZATION OF THERMAL PROCESSING: I. DEVELOPMENT OF A MODIFIED ALGORITHM OF COMPLEX METHOD , 2002 .

[24]  A. Abakarov,et al.  Thermal processing optimization through a modified adaptive random search , 2009 .

[25]  Jorge Nocedal,et al.  Knitro: An Integrated Package for Nonlinear Optimization , 2006 .

[26]  Cristina L. M. Silva,et al.  Quality optimization of conduction heating foods sterilized in different packages , 2007 .

[27]  M. Balaban,et al.  NONLINEAR CONSTRAINED OPTIMIZATION of THERMAL PROCESSING II. VARIABLE PROCESS TEMPERATURE PROFILES to REDUCE PROCESS TIME and to IMPROVE NUTRIENT RETENTION IN SPHERICAL and FINITE CYLINDRICAL GEOMETRIES , 2003 .

[28]  M. Balaban,et al.  COMPLEX METHOD FOR NONLINEAR CONSTRAINED MULTI‐CRITERIA (MULTI‐OBJECTIVE FUNCTION) OPTIMIZATION of THERMAL PROCESSING , 2003 .

[29]  Eva Balsa-Canto,et al.  Improving food processing using modern optimization methods , 2003 .

[30]  Paul Tobback,et al.  OPTIMIZATION of SURFACE QUALITY RETENTION DURING the THERMAL PROCESSING of CONDUCTION HEATED FOODS USING VARIABLE TEMPERATURE RETORT PROFILES , 1993 .