Tuning the Electronic, Ion Transport, and Stability Properties of Li-rich Manganese-based Oxide Materials with Oxide Perovskite Coatings: A First-Principles Computational Study

Lithium-rich manganese-based oxides (LRMO) are regarded as promising cathode materials for powering electric applications due to their high capacity (250 mAh g–1) and energy density (∼900 Wh kg–1). However, poor cycle stability and capacity fading have impeded the commercialization of this family of materials as battery components. Surface modification based on coating has proven successful in mitigating some of these problems, but a microscopic understanding of how such improvements are attained is still lacking, thus impeding systematic and rational design of LRMO-based cathodes. In this work, first-principles density functional theory (DFT) calculations are carried out to fill out such a knowledge gap and to propose a promising LRMO-coating material. It is found that SrTiO3 (STO), an archetypal and highly stable oxide perovskite, represents an excellent coating material for Li1.2Ni0.2Mn0.6O2 (LNMO), a prototypical member of the LRMO family. An accomplished atomistic model is constructed to theoretically estimate the structural, electronic, oxygen vacancy formation energy, and lithium-transport properties of the LNMO/STO interface system, thus providing insightful comparisons with the two integrating bulk materials. It is found that (i) electronic transport in the LNMO cathode is enhanced due to partial closure of the LNMO band gap (∼0.4 eV) and (ii) the lithium ions can easily diffuse near the LNMO/STO interface and within STO due to the small size of the involved ion-hopping energy barriers. Furthermore, the formation energy of oxygen vacancies notably increases close to the LNMO/STO interface, thus indicating a reduction in oxygen loss at the cathode surface and a potential inhibition of undesirable structural phase transitions. This theoretical work therefore opens up new routes for the practical improvement of cost-affordable lithium-rich cathode materials based on highly stable oxide perovskite coatings.

[1]  S. Indris,et al.  Structural Origin of Suppressed Voltage Decay in Single-Crystalline Li-Rich Layered Li[Li0.2 Ni0.2 Mn0.6 ]O2 Cathodes. , 2022, Small.

[2]  M. Shui,et al.  Deep insight into the lithium transportation mechanism and lithium deintercalation study on ε-LiVOPO4 cathode material by atomistic simulation and first-principles method , 2021 .

[3]  Hui Huang,et al.  Surface modification of Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with Fe2O3 as cathode material for Li-ion batteries , 2021 .

[4]  L. Nazar,et al.  Inhibiting Oxygen Release from Li‐rich, Mn‐rich Layered Oxides at the Surface with a Solution Processable Oxygen Scavenger Polymer , 2021, Advanced Energy Materials.

[5]  S. Pokhrel,et al.  Double Flame-Fabricated High-Performance AlPO4/LiMn2O4 Cathode Material for Li-Ion Batteries , 2021, ACS applied energy materials.

[6]  Xueping Gao,et al.  Insights into Li‐Rich Mn‐Based Cathode Materials with High Capacity: from Dimension to Lattice to Atom , 2021, Advanced Energy Materials.

[7]  R. Jalem,et al.  First-Principles Study of Microscopic Electrochemistry at the LiCoO2 Cathode/LiNbO3 Coating/β-Li3PS4 Solid Electrolyte Interfaces in an All-Solid-State Battery. , 2021, ACS applied materials & interfaces.

[8]  Xifei Li,et al.  Functional Passivation Interface of LiNi0.8Co0.1Mn0.1O2 toward Superior Lithium Storage , 2021, Advanced Functional Materials.

[9]  Zhangxian Chen,et al.  PVP-bridged γ-LiAlO2 nanolayer on Li1.2Ni0.182Co0.08Mn0.538O2 cathode materials for improving the rate capability and cycling stability , 2021 .

[10]  J. Vencovský,et al.  Plasma Hsp90 levels in patients with systemic sclerosis and relation to lung and skin involvement: a cross-sectional and longitudinal study , 2021, Scientific Reports.

[11]  G. Moore,et al.  Anomalous collapses of Nares Strait ice arches leads to enhanced export of Arctic sea ice , 2021, Nature communications.

[12]  R. Jalem,et al.  Electron and Ion Transfer across Interfaces of the NASICON-Type LATP Solid Electrolyte with Electrodes in All-Solid-State Batteries: A Density Functional Theory Study via an Explicit Interface Model. , 2020, ACS applied materials & interfaces.

[13]  P. Bruce,et al.  First-cycle voltage hysteresis in Li-rich 3d cathodes associated with molecular O2 trapped in the bulk , 2020, Nature Energy.

[14]  Yue Shen,et al.  Enhanced Cathode Performance: Mixed Al2O3 and LiAlO2 Coating of Li1.2Ni0.13Co0.13Mn0.54O2. , 2020, ACS applied materials & interfaces.

[15]  Haoqing Hou,et al.  Surface Modification of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Coating FePO4 with Yolk-shell Structure for Improved Electrochemical Performance. , 2020, ACS applied materials & interfaces.

[16]  G. Henkelman,et al.  Highly reversible oxygen redox in layered compounds enabled by surface polyanions , 2020, Nature Communications.

[17]  Bingkun Guo,et al.  An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries , 2020, Advanced Energy Materials.

[18]  A. Cao,et al.  Dielectric Polarization in Inverse Spinel‐Structured Mg2TiO4 Coating to Suppress Oxygen Evolution of Li‐Rich Cathode Materials , 2020, Advanced materials.

[19]  A. Manthiram.  A reflection on lithium-ion battery cathode chemistry , 2020, Nature Communications.

[20]  F. Kang,et al.  A Simple Dual-Ion Doping Method to Stabilize Li-Rich Materials and Suppress Voltage Decay. , 2020, ACS applied materials & interfaces.

[21]  Huiling Zhao,et al.  Local Electric‐Field‐Driven Fast Li Diffusion Kinetics at the Piezoelectric LiTaO3 Modified Li‐Rich Cathode–Electrolyte Interphase , 2019, Advanced science.

[22]  Yunjiao Li,et al.  Li4V2Mn(PO4)4-stablized Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode materials for lithium ion batteries , 2019, Nano Energy.

[23]  Zaiping Guo,et al.  Insight of a Phase Compatible Surface Coating for Long‐Durable Li‐Rich Layered Oxide Cathode , 2019, Advanced Energy Materials.

[24]  Zaiping Guo,et al.  Li-Rich Layered Oxides and Their Practical Challenges: Recent Progress and Perspectives , 2019, Electrochemical Energy Reviews.

[25]  Jun Zhang,et al.  Improved high rate capability of Li[Li0.2Mn0.534Co0.133Ni0.133]O2 cathode material by surface modification with Co3O4 , 2019, Journal of Alloys and Compounds.

[26]  C. Liang,et al.  A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries , 2019, Nano Energy.

[27]  Xiangming He,et al.  New Organic Complex for Lithium Layered Oxide Modification: Ultrathin Coating, High-Voltage, and Safety Performances , 2019, ACS Energy Letters.

[28]  Jun Lu,et al.  Temperature-Sensitive Structure Evolution of Lithium-Manganese-Rich Layered Oxides for Lithium-Ion Batteries. , 2018, Journal of the American Chemical Society.

[29]  Xuanxuan Bi,et al.  Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release , 2018, Nature Energy.

[30]  Kai Yang,et al.  Oxygen vacancies in CeO2 surface coating to improve the activation of layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material for Li-ion batteries , 2018, Ionics.

[31]  P. He,et al.  Direct Visualization of the Reversible O2−/O− Redox Process in Li‐Rich Cathode Materials , 2018, Advanced materials.

[32]  Jaephil Cho,et al.  Feasibility of Cathode Surface Coating Technology for High‐Energy Lithium‐ion and Beyond‐Lithium‐ion Batteries , 2017, Advanced materials.

[33]  Zonghai Chen,et al.  The role of nanotechnology in the development of battery materials for electric vehicles. , 2016, Nature nanotechnology.

[34]  Fangbao Fu,et al.  Hollow Porous Hierarchical-Structured 0.5Li2MnO3·0.5LiMn0.4Co0.3Ni0.3O2 as a High-Performance Cathode Material for Lithium-Ion Batteries. , 2016, ACS applied materials & interfaces.

[35]  Rahul Malik,et al.  The structural and chemical origin of the oxygen redox activity in layered and cation-disordered Li-excess cathode materials. , 2016, Nature chemistry.

[36]  J. Dahn,et al.  In Situ X-ray Diffraction Study of Layered Li-Ni-Mn-Co Oxides: Effect of Particle Size and Structural Stability of Core-Shell Materials , 2016 .

[37]  K. Amine,et al.  Visualizing nanoscale 3D compositional fluctuation of lithium in advanced lithium-ion battery cathodes , 2015, Nature Communications.

[38]  Yuliang Cao,et al.  Magnesium-Doped Li1.2[Co0.13Ni0.13Mn0.54]O2 for Lithium-Ion Battery Cathode with Enhanced Cycling Stability and Rate Capability. , 2015, ACS applied materials & interfaces.

[39]  Min Gyu Kim,et al.  A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles. , 2015, Nano letters.

[40]  Erik J. Berg,et al.  Differential Electrochemical Mass Spectrometry Study of the Interface of xLi2MnO3·(1–x)LiMO2 (M = Ni, Co, and Mn) Material as a Positive Electrode in Li-Ion Batteries , 2014 .

[41]  Li Li,et al.  Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD , 2013 .

[42]  Anubhav Jain,et al.  Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis , 2012 .

[43]  Susanne Stemmer,et al.  Effects of doping on the lattice parameter of SrTiO3 , 2012 .

[44]  Yang-Kook Sun,et al.  Role of surface coating on cathode materials for lithium-ion batteries , 2010 .

[45]  John T. Vaughey,et al.  Li{sub2}MnO{sub3}-stabilized LiMO{sub2} (M=Mn, Ni, Co) electrodes for high energy lithium-ion batteries , 2007 .

[46]  G. Henkelman,et al.  A climbing image nudged elastic band method for finding saddle points and minimum energy paths , 2000 .

[47]  Meicheng Li,et al.  Electrochemical effect of graphite fluoride modification on Li-rich cathode material in lithium ion battery , 2019, Ceramics International.

[48]  Anton Van der Ven,et al.  Lithium Diffusion in Layered Li x CoO2 , 1999 .