Backcalculation Method to Determine Effective Asphalt Binder Properties of Recycled Asphalt Pavement Mixtures

State departments of transportation are beginning to require the use of higher percentages of recycled asphalt pavement (RAP) in hot-mix asphalt. To help implement higher RAP contents, better procedures are needed for evaluating the binder properties of higher RAP content asphalt mixtures without chemical extraction. In particular, new and innovative methods are required to determine how the addition of RAP influences mechanical properties of the composite (RAP + virgin) asphalt mixtures. A method is summarized for determining what is referred to as the effective asphalt binder stiffness properties of asphalt mixtures blended with RAP. The proposed extraction-less procedure uses the Hirsch model to backcalculate the asphalt binder stiffness (G*) from asphalt mixture stiffness (E*). In addition, an analytical procedure to determine the phase angle (δ) is discussed. Test data comparing predicted versus measured asphalt binder properties of plant-produced asphalt mixtures with 0% RAP are presented. Additional validation data are presented for plant-produced asphalt mixtures of varying RAP percentages. Examples of implementing the backcalculated binder properties in the Mechanistic–Empirical Pavement Design Guide, as well as comparing the backcalculated asphalt binder properties with mixture fatigue test results, are also shown and discussed.

[1]  Hussain U Bahia,et al.  Practical Application of Viscoelastic Continuum Damage Theory to Asphalt Binder Fatigue Characterization , 2009 .

[2]  A Shah,et al.  Evaluation of mixtures using dynamic modulus tester: results and practical considerations , 2005 .

[3]  Baoshan Huang,et al.  Laboratory Investigation of Mixing Hot-Mix Asphalt with Reclaimed Asphalt Pavement , 2005 .

[4]  Kevin D Hall,et al.  Evaluation of testing protocols for dynamic modulus of hot-mix asphalt , 2006 .

[5]  D W Christensen,et al.  Interpretation of dynamic mechanical test data for paving grade asphalt cements , 1992 .

[6]  F. J. Richards.  A Flexible Growth Function for Empirical Use , 1959 .

[7]  Jo Sias Daniel,et al.  Mechanistic and Volumetric Properties of Asphalt Mixtures with Recycled Asphalt Pavement , 2005 .

[8]  Michael Boyle.  Materials-Related Forensic Analysis and Specialized Testing: Laboratory Evaluation of Hot-Mix Asphalt (HMA) Mixtures Containing Recycled or Waste Product Materials Using Performance Testing , 2005 .

[9]  M. Marasteanu,et al.  Effect of Reclaimed Asphalt Pavement (Proportion and Type) and Binder Grade on Asphalt Mixtures , 2008 .

[10]  Reynaldo Roque,et al.  Evaluation of the Gradation Effect on the Dynamic Modulus , 2005 .

[11]  Geoffrey M. Rowe.  Phase angle determination and interrelationships within bituminous materials , 2009 .

[12]  Thomas Bennert,et al.  Precision of AASHTO TP62-07 for Use in Mechanistic–Empirical Pavement Design Guide for Flexible Pavements , 2009 .

[13]  T. Pellinen,et al.  HIRSCH MODEL FOR ESTIMATING THE MODULUS OF ASPHALT CONCRETE , 2003 .

[14]  T Scullion,et al.  Overlay Tester: A Simple Performance Test for Thermal Reflective Cracking (With Discussion and Closure) , 2005 .

[15]  Mark Harley King.  Determination of Dynamic Moduli in Uniaxial Compression for North Carolina Hot Mix Asphalt Concrete , 2004 .

[16]  R M Anderson,et al.  Recommended use of reclaimed asphalt pavement in the Superpave mix design method: technician's manual. , 2000 .

[17]  E. J. Dickinson,et al.  The Dynamic Shear Modulus of Paving Asphalts as a Function of Frequency , 1974 .

[18]  Thomas Bennert,et al.  Field and Laboratory Forensic Analysis of Reflective Cracking on Massachusetts Interstate 495 , 2009 .

[19]  G Rowe,et al.  Functional forms for master curve analysis of bituminous materials , 2009 .