Investigating optimal operating parameters of DI diesel engine: a CFD approach using CONVERGETM

Purpose This paper aims to present the effects of varying different operating parameters such as Start of Injection (9 to 21 deg bTDC), compression ratio (16 to 12.5), fuel injection pressure (400 to 1,400 bar) and exhaust gas recirculation (0 to 25 per cent) on the performance and emissions of the engine for constant engine speed of 1,600 rpm. Design/methodology/approach Simulation results were validated with experimental data available in the literature for baseline configuration. The effect of each parameter on the performance characteristics such as pressure and temperature, emission characteristics such as NOx and soot are presented and discussed. Optimization has been carried out based on the regression equations developed from the simulation results to obtain the optimum set of the parameters to achieve the desired performance and emissions. Numerical simulations have been performed for the optimized set and compared with the reference engine. Findings Results of optimization showed that there was a simultaneous reduction in NOx and soot while maintaining the same level of performance as that of the baseline case. Originality/value Based on the present work, it can be said that lesser emissions are achieved in terms of NOx and soot while maintaining the same performance in terms of peak pressure.

[1]  K. Raja Gopal,et al.  In-cylinder fluid flow, turbulence and spray models—A review , 2009 .

[2]  Hongqing Feng,et al.  Effects of exhaust gas recirculation on low temperature combustion using wide distillation range diesel , 2013 .

[3]  B. Jayashankara,et al.  Effect of fuel injection timing and intake pressure on the performance of a DI diesel engine – A parametric study using CFD , 2010 .

[4]  S. Murugan,et al.  Homogeneous charge compression ignition (HCCI) combustion: Mixture preparation and control strategies in diesel engines , 2014 .

[5]  Mingfa Yao,et al.  Progress and recent trends in homogeneous charge compression ignition (HCCI) engines , 2009 .

[6]  M. Canakci,et al.  Effects of injection timing on the engine performance and exhaust emissions of a dual-fuel diesel engine , 2009 .

[7]  M. D. Checkel,et al.  The influence of Exhaust Gas Recirculation (EGR) on combustion and emissions of n-heptane/natural gas fueled Homogeneous Charge Compression Ignition (HCCI) engines , 2011 .

[8]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[9]  Avinash Kumar Agarwal,et al.  Combustion characteristics of diesel HCCI engine: An experimental investigation using external mixture formation technique , 2012 .

[10]  A. Dhar,et al.  Effect of fuel injection timing and pressure on combustion, emissions and performance characteristics of a single cylinder diesel engine , 2013 .

[11]  H. Sajjad,et al.  Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review , 2014 .

[12]  R. Reitz,et al.  A new high pressure droplet vaporization model for diesel engine modeling , 1995 .

[13]  Li Wei,et al.  Effects of compression ratio on the combustion characteristics of a homogeneous charge compression ignition engine , 2007 .

[14]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[15]  A. Agarwal,et al.  Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine , 2011 .

[16]  S. White,et al.  Membrane Partitioning: “Classical” and “Nonclassical” Hydrophobic Effects , 2010, The Journal of Membrane Biology.