Next Generation Nuclear Plant Materials Research and Development Program Plan

The U.S Department of Energy (DOE) has selected the Very High Temperature Reactor (VHTR) design for the Next Generation Nuclear Plant (NGNP) Project. The NGNP will demonstrate the use of nuclear power for electricity and hydrogen production without greenhouse gas emissions. The reactor design will be a graphite moderated, helium-cooled, prismatic or pebble-bed, thermal neutron spectrum reactor that will produce electricity and hydrogen in a state-of-the-art thermodynamically efficient manner. The NGNP will use very high burn-up, low-enriched uranium, TRISO-coated fuel and have a projected plant design service life of 60 years. The VHTR concept is considered to be the nearest-term reactor design that has the capability to efficiently produce hydrogen. The plant size, reactor thermal power, and core configuration will ensure passive decay heat removal without fuel damage or radioactive material releases during accidents. The NGNP Project is envisioned to demonstrate the following: (1) A full-scale prototype VHTR by about 2021; (2) High-temperature Brayton Cycle electric power production at full scale with a focus on economic performance; (3) Nuclear-assisted production of hydrogen (with about 10% of the heat) with a focus on economic performance; and (4) By test, the exceptional safety capabilities of the advanced gas-cooled reactors. Further, the NGNP program will: (1) Obtain a Nuclear Regulatory Commission (NRC) License to construct and operate the NGNP, this process will provide a basis for future performance based, risk-informed licensing; and (2) Support the development, testing, and prototyping of hydrogen infrastructures. The NGNP Materials Research and Development (RD (2) Developing a specific work package for the RD (3) Reporting the status and progress of the work based on committed deliverables and milestones; (4) Developing collaboration in areas of materials RD and (5) Ensuring that the RD thus, new materials and approaches may be required.

[1]  Michel Lecomte,et al.  The Framatome ANP Indirect-Cycle Very High Temperature Reactor , 2004 .

[2]  H. D. Gougar,et al.  Reactor Pressure Vessel Temperature Analysis for Prismatic and Pebble-Bed VHTR Designs , 2006 .

[3]  Yukio Tachibana,et al.  Reactivity control system of the high temperature engineering test reactor , 2004 .

[4]  P. A. Lessing,et al.  Creep of Polycrystalline Mullite , 1975 .

[5]  Robert Bratton.  NGNP Graphite Testing and Qualification Specimen Selection Strategy , 2005 .

[6]  David Nicholls,et al.  Pebble Bed Modular Reactor The First Generation IV Reactor To Be Constructed , 2004 .

[7]  James W. Sterbentz,et al.  NGNP Point Design - Results of the Initial Neutronics and Thermal-Hydraulic Assessments During FY-03, Rev. 1 , 2003 .

[8]  Paul A. Lessing,et al.  Creep of polycrystalline alumina, pure and doped with transition metal impurities , 1977 .

[9]  J. M. Corum,et al.  R&D PLAN FOR DEVELOPMENT OF HIGH-TEMPERATURE STRUCTURAL DESIGN TECHNOLOGY FOR GENERATION IV REACTOR SYSTEMS , 2004 .

[10]  Te McGreevy,et al.  Simplified Design Criteria for Very High Temperature Applications in Generation IV Reactors , 2004 .

[11]  Willem J. Quadakkers,et al.  Corrosion of High Temperature Alloys in the Primary Circuit Helium of High Temperature Gas Cooled Reactors. Part II: Experimental Results , 1985 .

[12]  F. Southworth,et al.  Very High Temperature Reactor (VHTR) Survey of Materials Research and Development Needs to Support Early Deployment , 2003 .

[13]  W. J. Quadakkers.  High temperature corrosion in the service environments of a nuclear process heat plant , 1987 .

[14]  D. A. Woodford,et al.  Environmental Embrittlement of High Temperature Alloys by Oxygen , 1983 .

[15]  Akira Kohyama,et al.  Property Tailorability for Advanced CVI Silicon Carbide composites for Fusion , 2006 .

[16]  Robert L. Bratton,et al.  Status of ASME Section III Task Group on Graphite Support Core Structures , 2005 .

[17]  Willem J. Quadakkers,et al.  Corrosion of high temprature alloys in the primary circuit helium of high temperature gas cooled reactors. – Part I: Theoretical background , 1985 .

[18]  Charles H. Henager,et al.  Structural Ceramic Composites for Nuclear Applications , 2005 .

[19]  Michael G. Jenkins,et al.  Development of Test Standards for Continuous Fiber Ceramic Composites in the United States , 1999 .