Phase change material-based building architecture for thermal management in residential and commercial establishments

Efficient and economical technology that can be used to store large amounts of heat or cold in a definite volume is the subject of research for a long time. Thermal storage plays an important role in building energy conservation, which is greatly assisted by the incorporation of latent heat storage (LHS) in building products. LHS in a phase change material (PCM) is very attractive because of its high storage density with small temperature swing. It has been demonstrated that for the development of a latent heat storage system (LHTS) in a building fabric, the choice of the PCM plays an important role in addition to heat transfer mechanism in the PCM. Thermal energy storage in the walls, ceiling and floor of buildings may be enhanced by encapsulating or embedding suitable PCMs within these surfaces. They can either capture solar energy directly or thermal energy through natural convection. Increasing the thermal storage capacity of a building can increase human comfort by decreasing the frequency of internal air temperature swings so that the indoor air temperature is closer to the desired temperature for a longer period of time. This paper aims to gather the information from the earlier works on the developments of PCM's incorporation in building, the problems associated with the selection of PCM and the various methods used to contain them for space heating and cooling applications.

[1]  José A. Orosa,et al.  Hourly indoor thermal comfort and air quality acceptance with passive climate control methods , 2009 .

[2]  Helmut E. Feustel,et al.  Thermal Performance of Phase Change Wallboard for Residential Cooling Application , 1997 .

[3]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[4]  D. Feldman,et al.  Latent heat storage in concrete , 1989 .

[5]  D. A. Neeper.  Thermal dynamics of wall board with latent heat storage , 2000 .

[6]  H. E. Feustel,et al.  Phase-change wallboard and mechanical night ventilation in commercial buildings: Potential for HVAC system downsizing , 1998 .

[7]  I. O. Salyer,et al.  Phase Change Katerials For Heating And Cooling Of Residential Buildings And Other Applications , 1990, Proceedings of the 25th Intersociety Energy Conversion Engineering Conference.

[8]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[9]  K. Peippo,et al.  A multicomponent PCM wall optimized for passive solar heating , 1991 .

[10]  D. Feldman,et al.  Absorption of phase change materials in concrete , 1992 .

[11]  R. J. Kedl,et al.  Activities in support of the wax-impregnated wallboard concept , 1989 .

[12]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[13]  Mario A. Medina,et al.  Development of a thermally enhanced frame wall with phase‐change materials for on‐peak air conditioning demand reduction and energy savings in residential buildings , 2005 .

[14]  E. Ghanbari,et al.  Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard , 1991 .

[15]  M. Hadjieva,et al.  Composite salt-hydrate concrete system for building energy storage , 2000 .

[16]  D. Feldman,et al.  Control aspects of latent heat storage and recovery in concrete , 2000 .

[17]  Kamal Abdel Radi Ismail,et al.  Thermally effective windows with moving phase change material curtains , 2001 .

[18]  Beat Lehmann,et al.  Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings , 2004 .