Modelling damage evolution in composite laminates subjected to low velocity impact

Abstract In this paper, the impact damage of composite laminates in the form of intra- and inter-laminar cracking was modelled using stress-based criteria for damage initiation, and fracture mechanics techniques to capture its evolution. The nonlinear shear behaviour of the composite was described by the Soutis shear stress–strain semi-empirical formula. The finite element (FE) method was employed to simulate the behaviour of the composite under low velocity impact. Interface cohesive elements were inserted between plies with appropriate mixed-mode damage laws to model delamination. The damage model was implemented in the FE code (Abaqus/Explicit) by a user-defined material subroutine (VUMAT). Numerical results in general gave a good agreement when compared to experimentally obtained curves of impact force and absorbed energy versus time. The various damage mechanisms introduced during the impact event were observed by non-destructive technique (NDT) X-ray radiography and were successfully captured numerically by the proposed damage evolution model.

[1]  Constantinos Soutis,et al.  Mechanisms of Internal Damage and Their Effect on the Behavior and Properties of Cross-Ply Composite Laminates , 2002 .

[2]  Constantinos Soutis,et al.  Predicting the compressive engineering performance of carbon fibre-reinforced plastics , 2000 .

[3]  Constantinos Soutis,et al.  Finite Element Modelling of Composite Materials and Structures , 2000 .

[4]  Constantinos Soutis,et al.  Compressive failure of 0° unidirectional carbon-fibre-reinforced plastic (CFRP) laminates by fibre microbuckling , 1999 .

[5]  Serge Abrate,et al.  Impact on Composite Structures , 1998 .

[6]  John Morton,et al.  Apparent strength scaling in continuous fiber composite laminates , 2000 .

[7]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[8]  H. Schürmann,et al.  FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS , 1998 .

[9]  Constantinos Soutis,et al.  Effect of impact damage on the compressive response of composite laminates , 2001 .

[10]  Costas Soutis,et al.  Analysis of multiple matrix cracking in [±θm/90n]s composite laminates. Part 1: In-plane stiffness properties , 1992 .

[11]  Constantinos Soutis,et al.  Health monitoring of composites using Lamb waves generated by piezoelectric devices , 2000, Plastics, Rubber and Composites.

[12]  Robin Olsson,et al.  Impact on composite structures , 2004, The Aeronautical Journal (1968).

[13]  Lorenzo Iannucci,et al.  An energy based damage model for thin laminated composites , 2006 .

[14]  N. Suh,et al.  Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites , 1979 .

[15]  Maurício Vicente Donadon,et al.  A numerical study on the impact resistance of composite shells using an energy based failure model , 2010 .

[16]  Costas Soutis,et al.  Strain energy release rate associated with local delamination in cracked composite laminates , 1994 .

[17]  Constantinos Soutis,et al.  Effect of off-axis ply orientation on 0°-fibre microbuckling , 1999 .

[18]  Joakim Schön,et al.  Coefficient of friction of composite delamination surfaces , 2000 .

[19]  Constantinos Soutis,et al.  A study on the compressive strength of thick carbon fibre-epoxy laminates , 2007 .

[20]  Brian Falzon,et al.  Predicting low-velocity impact damage on a stiffened composite panel , 2010 .

[21]  Fu-Kuo Chang,et al.  An Accumulative Damage Model for Tensile and Shear Failures of Laminated Composite Plates , 1995 .

[22]  Z. Hashin,et al.  A Fatigue Failure Criterion for Fiber Reinforced Materials , 1973 .

[23]  Akhtar S. Khan,et al.  Continuum theory of plasticity , 1995 .

[24]  Ireneusz Lapczyk,et al.  Progressive damage modeling in fiber-reinforced materials , 2007 .

[25]  Constantinos Soutis,et al.  Fracture of layered composites by internal fibre instability: effect of interfacial adhesion , 2006, The Aeronautical Journal (1968).

[26]  Constantinos Soutis,et al.  The effect of delaminations induced by transverse cracks and splits on stiffness properties of composite laminates , 2000 .

[27]  Dirk Vandepitte,et al.  Failure analysis of low velocity impact on thin composite laminates : Experimental and numerical approaches , 2008 .

[28]  Sergio Oller,et al.  Coupled plastic-damaged model , 1996 .

[29]  Constantinos Soutis,et al.  A Graphical Method Predicting the Compressive Strength of Toughened Unidirectional Composite Laminates , 2011 .

[30]  Brian Falzon,et al.  A progressive failure model for composite laminates subjected to low velocity impact damage , 2008 .

[31]  F. L. Matthews,et al.  Design, development, and implementation of test methods for determination of through thickness properties of laminated composites , 2000 .

[32]  Lorenzo Iannucci,et al.  Fracture toughness of the tensile and compressive fibre failure modes in laminated composites , 2006 .

[33]  Maria Kashtalyan,et al.  Analysis of local delaminations in composite laminates with angle-ply matrix cracks , 2002 .

[34]  Z. Hashin.  Failure Criteria for Unidirectional Fiber Composites , 1980 .

[35]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[36]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[37]  Constantinos Soutis,et al.  Prediction of the post-impact compressive strength of CFRP laminated composites , 1996 .

[38]  Costas Soutis,et al.  Real-time nondestructive evaluation of fiber composite laminates using low-frequency Lamb waves. , 2002, The Journal of the Acoustical Society of America.