Preparation and thermal characteristics of CuO–oleic acid nanofluids as a phase change material

Abstract This paper presents an experimental investigation of CuO–oleic acid nanofluids as a new phase change material for the thermal energy storage of cooling systems. This paper also presents the preparation of nanofluids, which is solid–liquid composite material consisting of CuO nanoparticles with sizes ranging from 1 to 80 nm dispersed in oleic acid. CuO nanoparticles were synthesized by precipitation method. Sedimentation photograph and particle size distribution of nanofluids prepared by two step method, illustrate the stability and evenness of dispersion. Thermophysical properties of CuO–oleic acid nanofluids such as phase change temperatures and latent heats were analysed by DSC measurements. Using thermal diffusivity analyser, enhancement of thermal conductivity of nanofluids with different mass fraction of CuO nanoparticles was found to be higher than oleic acid. Based on the test results, complete solidification times of nanofluids with 0.5, 1.0, 1.5 and 2 wt% of CuO nanoparticles could be saved by 10.71, 16.07, 19.64 and 27.67% respectively, than the base fluid. Similarly, complete melting times of nanofluids with 0.5, 1.0, 1.5 and 2 wt% of CuO nanoparticles could be saved by 7.14, 14.28, 25 and 28.57% respectively, than the base fluid. Thus, CuO–oleic acid nanofluids can be recommended as better PCM for cooling thermal energy storage applications.

[1]  Yan Yang,et al.  Preparation and characterization of CuO nanoparticles with different morphology through a simple quick-precipitation method in DMAC–water mixed solvent , 2010 .

[2]  G. Aeppli,et al.  Resonance as a measure of pairing correlations in the high-T c superconductor YBa2Cu3O6.6 , 2000, Nature.

[3]  S. Iniyan,et al.  Experimental and analytical investigation of solidification and melting characteristics of PCMs inside cylindrical encapsulation , 2008 .

[4]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[5]  A. Sari,et al.  Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage , 2009 .

[6]  Hua Li,et al.  Thermal conductivity enhancement dependent pH and chemical surfactant for Cu-H2O nanofluids , 2008 .

[7]  W. Lu,et al.  Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs) , 2010 .

[8]  I. Alatiqi,et al.  Heat transfer enhancement by metal screens and metal spheres in phase change energy storage systems , 2004 .

[9]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[10]  L. Cabeza,et al.  Natural convection heat transfer coefficients in phase change material (PCM) modules with external vertical fins , 2008 .

[11]  Y. Xuan,et al.  Aggregation structure and thermal conductivity of nanofluids , 2003 .

[12]  A. Sari,et al.  Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material , 2007 .

[13]  Shuying Wu,et al.  Thermal energy storage behavior of Al2O3–H2O nanofluids , 2009 .

[14]  S. Kakaç,et al.  Enhanced thermal conductivity of nanofluids: a state-of-the-art review , 2010 .

[15]  Sun Qi,et al.  A novel process for preparation of a Cu/ZnO/Al2O3 ultrafine catalyst for methanol synthesis from CO2 + H2: comparison of various preparation methods , 1996 .

[16]  K. Lafdi,et al.  Effect of multiple phase change materials (PCMs) slab configurations on thermal energy storage , 2006 .

[17]  W. Zhong,et al.  Enhancement of fluid thermal conductivity by the addition of single and hybrid nano-additives , 2007 .

[18]  Huaqing Xie,et al.  Investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluid , 2009 .

[19]  K. Ismail,et al.  Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .

[20]  V. C. Moore,et al.  Band Gap Fluorescence from Individual Single-Walled Carbon Nanotubes , 2002, Science.

[21]  Yi Wang,et al.  Stearic acid/polymethylmethacrylate composite as form-stable phase change materials for latent heat thermal energy storage , 2011 .

[22]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[23]  J. Jean,et al.  Dispersion of Oleate‐Modified CuO Nanoparticles in a Nonpolar Solvent , 2007 .

[24]  Z. Zhang,et al.  Study of a PCM based energy storage system containing Ag nanoparticles , 2007 .

[25]  Zhengguo Zhang,et al.  Study on preparation of montmorillonite-based composite phase change materials and their applications in thermal storage building materials , 2008 .

[26]  A. Mujumdar,et al.  Cyclic heat transfer in a novel storage unit of multiple phase change materials , 1996 .

[27]  M. Tong,et al.  Experimental study of thermal conductivity and phase change performance of nanofluids PCMs , 2009 .

[28]  Zhen-hua Liu,et al.  Application of Cu-water and Cu-ethanol nanofluids in a small flat capillary pumped loop , 2011 .

[29]  K. Siva,et al.  Experimental and numerical investigation of phase change materials with finned encapsulation for energy-efficient buildings , 2010 .

[30]  S. Kalaiselvam,et al.  Analytical and experimental investigations of nanoparticles embedded phase change materials for cooling application in modern buildings , 2012 .