UWB-based sensor networks and the IEEE 802.15.4a standard - a tutorial

This paper gives a tutorial overview of ultrawide-band communications systems for sensor networks. In particular, we describe the IEEE 802.15.4a standard, which is currently being developed. While most nodes (reduced-function devices) in sensor networks usually have to consume little energy, and are constrained with respect to the complexity of the processing they can perform, some nodes (full-function devices) do not show these restrictions. We describe a hybrid modulation, coding, and multiple access scheme that is particularly suited for heterogeneous networks that contain both FFDs and RFDs. The scheme is a generalization of the well-known time-hopping impulse radio (TH-IR). It employs systematic coding, joint pulse-position modulation and phase shift keying, as well as a combination of polarity scrambling and time-hopping. We also describe two-way ranging algorithms that serve as the basis for geolocation in 802.15.4a, and we discuss the methods for how the ranging information can be kept secret from snoopers.

[1]  G.B. Giannakis,et al.  Localization via ultra-wideband radios: a look at positioning aspects for future sensor networks , 2005, IEEE Signal Processing Magazine.

[2]  F. Tufvesson,et al.  Ultra-wideband communication using hybrid matched filter correlation receivers , 2004, 2004 IEEE 59th Vehicular Technology Conference. VTC 2004-Spring (IEEE Cat. No.04CH37514).

[3]  Moe Z. Win,et al.  Impulse radio: how it works , 1998, IEEE Communications Letters.

[4]  Chia-Chin Chong,et al.  A comprehensive model for ultrawideband propagation channels , 2005, GLOBECOM '05. IEEE Global Telecommunications Conference, 2005..

[5]  Wayne E. Stark,et al.  Performance of ultra-wideband communications with suboptimal receivers in multipath channels , 2002, IEEE J. Sel. Areas Commun..

[6]  A. Molisch,et al.  Statistical analysis of the UWB channel in an industrial environment , 2004, IEEE 60th Vehicular Technology Conference, 2004. VTC2004-Fall. 2004.

[7]  Moe Z. Win,et al.  On the energy capture of ultrawide bandwidth signals in dense multipath environments , 1998, IEEE Communications Letters.

[8]  D. Puccinelli,et al.  Wireless sensor networks: applications and challenges of ubiquitous sensing , 2005, IEEE Circuits and Systems Magazine.

[9]  Moe Z. Win,et al.  Ultra-wide bandwidth time-hopping spread-spectrum impulse radio for wireless multiple-access communications , 2000, IEEE Trans. Commun..

[10]  Huaping Liu,et al.  Hybrid Ultrawideband Modulations Compatible for Both Coherent and Transmit-Reference Receivers , 2007, IEEE Transactions on Wireless Communications.

[11]  Moe Z. Win,et al.  Performance of low-complexity RAKE reception in a realistic UWB channel , 2002, 2002 IEEE International Conference on Communications. Conference Proceedings. ICC 2002 (Cat. No.02CH37333).

[12]  D. L. Goeckel,et al.  Slightly frequency-shifted reference ultra-wideband (UWB) radio: TR-UWB without the delay element , 2005 .

[13]  Robert A. Scholtz,et al.  Multiple access with time-hopping impulse modulation , 1993, Proceedings of MILCOM '93 - IEEE Military Communications Conference.

[14]  Ian F. Akyildiz,et al.  Sensor Networks , 2002, Encyclopedia of GIS.

[15]  Ian Oppermann,et al.  UWB wireless sensor networks: UWEN - a practical example , 2004, IEEE Communications Magazine.

[16]  R. Hoctor,et al.  Delay-hopped transmitted-reference RF communications , 2002, 2002 IEEE Conference on Ultra Wideband Systems and Technologies (IEEE Cat. No.02EX580).

[17]  A. Viterbi.  CDMA: Principles of Spread Spectrum Communication , 1995 .

[18]  Mani B. Srivastava,et al.  Emerging techniques for long lived wireless sensor networks , 2006, IEEE Communications Magazine.

[19]  Andreas F. Molisch,et al.  Ultrawideband propagation channels-theory, measurement, and modeling , 2005, IEEE Transactions on Vehicular Technology.

[20]  Moe Z. Win,et al.  Performance of selective Rake reception in a realistic UWB channel , 2002 .