The wireless market drives the integration of RF circuits on common digital CMOS technologies. Full integration of the tank circuit, low-phase noise and high current efficiency are desirable for voltage-controlled oscillator (VCO) circuits. The design of fully-integrated non-relaxation VCOs in modern digital technologies is limited by the lack of high-quality passive components. For example, the quality of on-chip inductors is severely limited due to ohmic losses, especially in common CMOS technologies with low-resistivity substrates. Using transistor parasitics as tank capacitors, large active devices can be used in the VCO so current efficiency is optimized while phase-noise performance and a high center frequency are maintained. For a 0.7-2.7 V tune voltage range, a 200 MHz or 4.3% tuning range is available. This VCO can be used for 5 GHz wireless applications with a typical IF frequency of several hundred MHz.
[1]
Michiel Steyaert,et al.
Low-noise voltage-controlled oscillators using enhanced LC-tanks
,
1995
.
[2]
J.N. Burghartz,et al.
A 3 V 4 GHz nMOS voltage-controlled oscillator with integrated resonator
,
1996,
1996 IEEE International Solid-State Circuits Conference. Digest of TEchnical Papers, ISSCC.
[3]
M. Steyaert,et al.
A 1.8-GHz low-phase-noise spiral-LC CMOS VCO
,
1996,
1996 Symposium on VLSI Circuits. Digest of Technical Papers.
[4]
B. Razavi,et al.
A 1.8 GHz CMOS voltage-controlled oscillator
,
1997,
1997 IEEE International Solids-State Circuits Conference. Digest of Technical Papers.