Automatic Decomposition of Complex thin Walled CAD Models for Hexahedral Dominant Meshing

Abstract This paper describes an automatic method for identifying thin-sheet regions (regions with large lateral dimensions relative to the thickness) for complex thin walled components, with a view to using this information to guide the hex meshing process. This fully automated method has been implemented in a commercial CAD system (Siemens NX) and is based on the interrogation and manipulation of face pairs, which are sets of opposing faces bounding thin-sheet regions. Careful consideration is given to the mapping, merging and intersection of face pairs to generate topologies suitable for sweep meshing thin-sheet regions, and for treating the junctions between adjacent thin-sheet regions. The quality of the resulting hexahedral mesh is considered when making decisions on the generation and positioning of the cutting surfaces required to isolate thin-sheet regions. The resulting decomposition delivers a substantial step towards automatic hexahedral meshing for complex thin-walled geometries. It is proposed that hexahedral meshes be applied to the identified thin-sheet regions by quad meshing one of the faces bounding the thin-sheet region and sweeping it through the thickness to create hexahedral elements.

[1]  Mark S. Shephard,et al.  Identifying and Meshing Thin Sections of 3-d Curved Domains , 2005, IMR.

[2]  David R. White,et al.  Automated Hexahedral Mesh Generation by Virtual Decomposition , 1995 .

[3]  Christopher M. Tierney,et al.  Common Themes in Multi-block Structured Quad/Hex Mesh Generation , 2015 .

[4]  Trevor T. Robinson,et al.  Automatic dimensional reduction and meshing of stiffened thin-wall structures , 2013, Engineering with Computers.

[5]  Koteshwar Chirumalla,et al.  Project: CRESCENDO - Collaborative and Robust Engineering using Simulation Capability Enabling Next Design Optimisation , 2009 .

[6]  Matthew L. Staten,et al.  BMSweep: Locating Interior Nodes During Sweeping , 1999, Engineering with Computers.

[7]  Baining Guo,et al.  All-hex meshing using singularity-restricted field , 2012, ACM Trans. Graph..

[8]  Liang Sun,et al.  Generating analysis topology using virtual topology operators , 2015 .

[9]  Timothy J. Tautges,et al.  One-to-one sweeping based on harmonic S-T mappings of facet meshes and their cages , 2014, Engineering with Computers.

[10]  Franck Ledoux,et al.  Smoothness driven frame field generation for hexahedral meshing , 2016, Comput. Aided Des..

[11]  Xevi Roca,et al.  An automatic and general least-squares projection procedure for sweep meshing , 2009, Engineering with Computers.

[12]  G. Toussaint.  Solving geometric problems with the rotating calipers , 1983 .

[13]  Mohsen Rezayat,et al.  Midsurface abstraction from 3D solid models: general theory, applications , 1996, Comput. Aided Des..

[14]  Cecil Armstrong,et al.  Automated mixed dimensional modelling from 2D and 3D CAD models , 2011 .

[15]  Jason F. Shepherd,et al.  An Immersive Topology Environment for Meshing , 2007, IMR.

[16]  Trevor T. Robinson,et al.  Automatic decomposition and efficient semi-structured meshing of complex solids , 2012, Engineering with Computers.

[17]  Yongyao Luo,et al.  Unsteady internal flow field simulations in a double suction centrifugal fan , 2013 .

[18]  Kenji Shimada,et al.  Pen-Based User Interface for Geometric Decomposition for Hexahedral Mesh Generation , 2010, IMR.

[19]  David R. White,et al.  CCSweep: automatic decomposition of multi-sweep volumes , 2003, Engineering with Computers.

[20]  Timothy J. Tautges,et al.  Feature based hex meshing methodology: feature recognition and volume decomposition , 2001, Comput. Aided Des..

[21]  M. Sabin,et al.  Hexahedral mesh generation by medial surface subdivision: Part I. Solids with convex edges , 1995 .

[22]  T. Blacker.  The Cooper Tool , 1996 .

[23]  Shuming Gao,et al.  Automatic Swept Volume Decomposition based on Sweep Directions Extraction for Hexahedral Meshing , 2014 .

[24]  David R. White,et al.  Improved Imprint and Merge for Conformal Meshing , 2002, IMR.