A numerical method for predicting O-forming gap in UOE pipe manufacturing

Abstract Large diameter welded pipes used in oil and gas pipelines are primarily manufactured by the UOE process, which consists of U-forming, O-forming, and expansion procedures. The formation of O-forming gap in the O-forming stage is a key processing factor and it involves complex plastic deformation and springback of the steel plate. In this paper, a numerical method is proposed for predicting geometric configuration and O-forming gap of steel plate after C–U–O-forming. A combined hardening model for characterizing the loading–unloading–reverse loading deformation of pipe steels is developed based on the Chaboche hardening model. The yield plateau phenomenon and the variation of elastic modulus with the increase of pre-strain are incorporated. Industrial experiments are carried out, and the proposed method is validated through comparison between experimental and calculated results. Furthermore, the influence of material and processing parameters on O-forming gap is numerically investigated. The results reveal that U-forming radius is the most important factor in C- and U-forming stages to determine O-forming gap, and the opening gap width increases with increasing of compression ratio in O-forming stage. Finally, the established numerical method is combined with a genetic algorithm and applied to optimize UOE process parameters for obtaining an ideal opening gap. The proposed method provides an effective and efficient tool for UOE process design.

[1]  Sunghak Lee,et al.  Effects of microstructure and yield ratio on strain hardening and Bauschinger effect in two API X80 linepipe steels , 2012 .

[2]  N. Kolbasnikov,et al.  The Bauschinger effect and the formation of microalloyed-steel properties in pipe manufacture , 2012, Steel in Translation.

[3]  Rita G. Toscano,et al.  Modeling the UOE Pipe Manufacturing Process , 2008 .

[4]  Luigi Tricarico,et al.  Effect of forming and calibration operations on the final shape of large diameter welded tubes , 2005 .

[5]  Tsutomu Usami,et al.  A TWO-SURFACE MODEL FOR STEELS WITH YIELD PLATEAU , 1992 .

[6]  A. M. Gresnigt,et al.  Local Buckling of UOE And Seamless Steel Pipes , 2001 .

[7]  M. Strangwood,et al.  Effect of microalloying additions on steel plate to pipe property variations during UOE linepipe processing , 2003 .

[8]  E. Corona,et al.  On the effect of the U-O-E manufacturing process on the collapse pressure of long tubes , 1994 .

[9]  H. Moslemi Naeini,et al.  Analysis of deformation behaviour of the large diameter pipe by U-O bending process , 2006 .

[10]  Tongxi Yu,et al.  On springback after the pure bending of beams and plates of elastic work-hardening materials—III , 1981 .

[11]  Fusahito Yoshida,et al.  Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain , 2002 .

[12]  R. Hill.  The mathematical theory of plasticity , 1950 .

[13]  S. Kyriakides,et al.  Collapse of Deepwater Pipelines , 1988 .

[14]  Dayong Li,et al.  Numerical simulation of X90 UOE pipe forming process , 2013 .

[15]  Stelios Kyriakides,et al.  On the collapse of inelastic thick-walled tubes under external pressure , 1986 .

[16]  Yinghong Peng,et al.  Numerical study on the X80 UOE pipe forming process , 2015 .

[17]  Sunghak Lee,et al.  Effects of microstructure and pre-strain on Bauschinger effect in API X70 and X80 linepipe steels , 2013, Metals and Materials International.

[18]  Shilin Chen,et al.  Collapse of UOE manufactured steel pipes , 2000 .

[19]  M. Strangwood,et al.  Mechanical Property Development During UOE Forming of Large Diameter Pipeline Steels , 2010 .

[20]  Stelios Kyriakides,et al.  Effects of the UOE/UOC pipe manufacturing processes on pipe collapse pressure , 2007 .

[21]  Gianluca Mannucci,et al.  Numerical Simulation Analysis of High Strength UOE Steel Pipes , 2008 .

[22]  Jean-Louis Chaboche,et al.  A review of some plasticity and viscoplasticity constitutive theories , 2008 .

[23]  M. Strangwood,et al.  Influence of microalloying precipitates on Bauschinger effect during UOE forming of line pipe steels , 2007 .

[24]  C. O. Frederick,et al.  A mathematical representation of the multiaxial Bauschinger effect , 2007 .

[25]  J. Chaboche,et al.  On the Plastic and Viscoplastic Constitutive Equations—Part I: Rules Developed With Internal Variable Concept , 1983 .

[26]  G. Kinzel,et al.  A new model for springback prediction in which the Bauschinger effect is considered , 2001 .

[27]  Rita G. Toscano,et al.  Numerical Model Of Uoe Steel Pipes: Forming Process And Structural Behavior. , 2007 .

[28]  E. Corona,et al.  On the Effect of the UOE Manufacturing Process on the Collapse Pressure of Long Tubes , 1991 .

[29]  M. Strangwood,et al.  Bauschinger Effect in Microalloyed Steels: Part II. Influence of Work Softening on Strength Development During UOE Line-Pipe Forming , 2011 .

[30]  Tongxi Yu,et al.  Springback after the biaxial elastic-plastic pure bending of a rectangular plate—I , 1981 .

[31]  Katsumi Kawada,et al.  Recent developments of bending in Japan , 1989 .

[32]  Vladimir V. Aleshin,et al.  A Simulation Technology for a Full Cycle of Steel Line Pipe Manufacturing Operations , 2011 .

[33]  N. Petrinic,et al.  Introduction to computational plasticity , 2005 .

[34]  Hanxing Zhu.  Large deformation pure bending of an elastic plastic power-law-hardening wide plate: analysis and application , 2007 .

[35]  Tongxi Yu,et al.  On the range of applicability of results for the springback of an elastic/perfectly plastic rectangular plate after subjecting it to biaxial pure bending—II , 1981 .

[36]  Qiang Li,et al.  Quality control on crimping of large diameter welding pipe , 2012 .

[37]  M. Strangwood,et al.  Bauschinger Effect in Microalloyed Steels: Part I. Dependence on Dislocation-Particle Interaction , 2010 .