Unraveling the Hydrocracking Capabilities of Fluidized Bed Systems Operated with Natural Ores as Bed Materials

[1]  Henrik Thunman,et al.  Thermochemical conversion of polyethylene in a fluidized bed: impact of transition metal-induced oxygen transport on product distribution , 2022, Journal of Analytical and Applied Pyrolysis.

[2]  W. Kaminsky.  Chemical recycling of plastics by fluidized bed pyrolysis , 2021 .

[3]  K. Polychronopoulou,et al.  Synthesis and performance evaluation of hydrocracking catalysts: A review , 2020, Journal of Industrial and Engineering Chemistry.

[4]  P. Knutsson,et al.  Comparison of Ash Layer Formation Mechanisms on Si-Containing Bed Material during Dual Fluidized Bed Gasification of Woody Biomass , 2020 .

[5]  Henrik Thunman,et al.  Circular use of plastics-transformation of existing petrochemical clusters into thermochemical recycling plants with 100% plastics recovery , 2019 .

[6]  S. Al-Salem.  Thermal pyrolysis of high density polyethylene (HDPE) in a novel fixed bed reactor system for the production of high value gasoline range hydrocarbons (HC) , 2019, Process Safety and Environmental Protection.

[7]  H. Hofbauer,et al.  Influence of the loop seal fluidization on the operation of a fluidized bed reactor system , 2019, Powder Technology.

[8]  A. Matuszewska,et al.  Thermolytic Conversion of Waste Polyolefins into Fuels Fraction with the Use of Reactive Distillation and Hydrogenation with the Syngas under Atmospheric Pressure , 2019, Energy & Fuels.

[9]  P. Ouyang,et al.  Efficient and stable Cu-Ni/ZrO2 catalysts for in situ hydrogenation and deoxygenation of oleic acid into heptadecane using methanol as a hydrogen donor , 2018, Fuel.

[10]  M. Irfan,et al.  Hydrocracking of virgin and waste plastics: A detailed review , 2018, Renewable and Sustainable Energy Reviews.

[11]  Peng Dong,et al.  From cheap natural bauxite to high-efficient slurry-phase hydrocracking catalyst for high temperature coal tar: A simple hydrothermal modification , 2018, Fuel Processing Technology.

[12]  Rafael Auras,et al.  A roadmap towards green packaging: The current status and future outlook for polyesters in the packaging industry , 2017 .

[13]  Yu Yuanyuan,et al.  Acid-Modified Natural Bauxite Mineral as a Cost-Effective and High-Efficient Catalyst Support for Slurry-Phase Hydrocracking of High-Temperature Coal Tar , 2016 .

[14]  S. Fatemi,et al.  Deuterium tracing study of unsaturated aliphatics hydrogenation by supercritical water in upgrading heavy oil. Part II: Hydrogen donating capacity of water in the presence of iron(III) oxide nanocatalyst , 2016 .

[15]  Shohreh Fatemi,et al.  Catalytic cracking of petroleum vacuum residue in supercritical water media: Impact of α-Fe2O3 in the form of free nanoparticles and silica-supported granules , 2015 .

[16]  J. Wood,et al.  Effect of cyclohexane as hydrogen-donor in ultradispersed catalytic upgrading of heavy oil , 2015 .

[17]  N. Itoh,et al.  Effect of CO addition on upgrading bitumen in supercritical water , 2015 .

[18]  Henrik Thunman,et al.  Assessment of the Solid-Phase Adsorption Method for Sampling Biomass-Derived Tar in Industrial Environments , 2013 .

[19]  Hermann Hofbauer,et al.  Conversion of mixed plastic wastes in a dual fluidized bed steam gasifier , 2013 .

[20]  O. N. Fedyaeva,et al.  Hydrogenation of bitumen in situ in supercritical water flow with and without addition of zinc and aluminum , 2012 .

[21]  Javier Bilbao,et al.  Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking , 2012 .

[22]  M. Artetxe,et al.  Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed , 2012 .

[23]  A. Steinfeld,et al.  Vacuum Carbothermic Reduction of Al2O3, BeO, MgO-CaO, TiO2, ZrO2, HfO2 + ZrO2, SiO2, SiO2 + Fe2O3, and GeO2 to the Metals. A Thermodynamic Study , 2011 .

[24]  P. Canu,et al.  Two-steps selective thermal depolymerization of polyethylene. 1: Feasibility and effect of devolatilization heating policy , 2010 .

[25]  Su-Hwa Jung,et al.  Pyrolysis of a fraction of waste polypropylene and polyethylene for the recovery of BTX aromatics using a fluidized bed reactor , 2010 .

[26]  Maria Laura Mastellone,et al.  Olivine as a tar removal catalyst during fluidized bed gasification of plastic waste , 2008 .

[27]  J. F. Mastral,et al.  Theoretical prediction of product distribution of the pyrolysis of high density polyethylene , 2007 .

[28]  Kj Krzysztof Ptasinski,et al.  Olivine as tar removal catalyst for biomass gasifiers: Catalyst characterization , 2005 .

[29]  Burtron H. Davis,et al.  Fischer-Tropsch synthesis: relationship between iron catalyst composition and process variables , 2003 .

[30]  Pan Wei,et al.  Kinetics and mechanism of carbothermic reduction of magnesia , 2003 .

[31]  Roda Bounaceur,et al.  Modeling of hydrocarbons pyrolysis at low temperature. Automatic generation of free radicals mechanisms , 2002 .

[32]  F. Berruti,et al.  Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor , 1999 .

[33]  Q. Wang,et al.  Review of hydrogen production using chemical-looping technology , 2018 .

[34]  S. Fatemi,et al.  Deuterium tracing study of unsaturated aliphatics hydrogenation by supercritical water in upgrading heavy oil. Part I: Non-catalytic cracking , 2016 .

[35]  L. O. Alemán-Vázquez,et al.  Effect of tetralin, decalin and naphthalene as hydrogen donors in the upgrading of heavy oils , 2012 .

[36]  T. Tago,et al.  Recovery of useful lighter fuels from petroleum residual oil by oxidative cracking with steam using iron oxide catalyst , 2010 .