A Fast Response−Recovery 3D Graphene Foam Humidity Sensor for User Interaction

Humidity sensors allow electronic devices to convert the water content in the environment into electronical signals by utilizing material properties and transduction techniques. Three-dimensional graphene foam (3DGF) can be exploited in humidity sensors due to its convenient features including low-mass density, large specific surface area, and excellent electrical. In this paper, 3DGF with super permeability to water enables humidity sensors to exhibit a broad relative humidities (RH) range, from 0% to 85.9%, with a fast response speed (response time: ~89 ms, recovery time: ~189 ms). To interpret the physical mechanism behind this, we constructed a 3DGF model decorated with water to calculate the energy structure and we carried out the CASTEP as implemented in Materials Studio 8.0. This can be ascribed to the donor effect, namely, the electronic donation of chemically adsorbed water molecules to the 3DGF surface. Furthermore, this device can be used for user interaction (UI) with unprecedented performance. These high performances support 3DGF as a promising material for humidity sensitive material.

[1]  Enrico Traversa,et al.  Ceramic sensors for humidity detection: the state-of-the-art and future developments , 1995 .

[2]  Jia Zhang,et al.  Carbon Nanostructure-Based Field-Effect Transistors for Label-Free Chemical/Biological Sensors , 2010, Sensors.

[3]  Tingting Yang,et al.  Simultaneous High Sensitivity Sensing of Temperature and Humidity with Graphene Woven Fabrics. , 2017, ACS applied materials & interfaces.

[4]  Fei Wang,et al.  Modified graphene oxide/Nafion composite humidity sensor and its linear response to the relative humidity , 2017, 2017 IEEE SENSORS.

[5]  Sung Min Seo,et al.  Self-powered humidity sensor based on graphene oxide composite film intercalated by poly(sodium 4-styrenesulfonate). , 2014, ACS applied materials & interfaces.

[6]  Jianquan Yao,et al.  PbS-Decorated WS2 Phototransistors with Fast Response , 2017 .

[7]  Xingcheng Xiao,et al.  A review of graphene and graphene oxide sponge: material synthesis and applications to energy and the environment , 2014 .

[8]  Jani Kivioja,et al.  Ultrafast graphene oxide humidity sensors. , 2013, ACS nano.

[9]  Zhaoxiong Xie,et al.  High-sensitivity humidity sensor based on a single SnO(2) nanowire. , 2007, Journal of the American Chemical Society.

[10]  Chi-En Lu,et al.  Humidity Sensors: A Review of Materials and Mechanisms , 2005 .

[11]  Vojko Matko,et al.  Next Generation AT-Cut Quartz Crystal Sensing Devices , 2011, Sensors.

[12]  Dongzhi Zhang,et al.  Humidity-sensing properties of chemically reduced graphene oxide/polymer nanocomposite film sensor based on layer-by-layer nano self-assembly , 2014 .

[13]  Dongzhi Zhang,et al.  Ultrahigh performance humidity sensor based on layer-by-layer self-assembly of graphene oxide/polyelectrolyte nanocomposite film , 2014 .

[14]  Jin-Woo Han,et al.  A carbon nanotube based ammonia sensor on cellulose paper , 2014 .

[15]  Zhang Zhang,et al.  Broadband Phototransistor Based on CH3NH3PbI3 Perovskite and PbSe Quantum Dot Heterojunction. , 2017, The journal of physical chemistry letters.

[16]  Teng Fei,et al.  Polymeric humidity sensors with nonlinear response: Properties and mechanism investigation , 2013 .

[17]  Bao-Xun Zhang,et al.  Highly sensitive humidity sensor based on graphene oxide foam , 2017 .

[18]  Jianting Zhang,et al.  Study of humidity sensors based on nanostructured carbon films produced by physical vapor deposition , 2013 .

[19]  Jianquan Yao,et al.  High Performances for Solution‐Pocessed 0D–0D Heterojunction Phototransistors , 2017 .

[20]  Ruitao Lv,et al.  Extraordinary room-temperature photoluminescence in triangular WS2 monolayers. , 2012, Nano letters.

[21]  George G. Malliaras,et al.  Humidity sensors based on pentacene thin-film transistors , 2002 .

[22]  Yong‐Lai Zhang,et al.  Two-beam-laser interference mediated reduction, patterning and nanostructuring of graphene oxide for the production of a flexible humidity sensing device , 2012 .

[23]  A. Fischer,et al.  Resistive graphene humidity sensors with rapid and direct electrical readout , 2015, Nanoscale.

[24]  Z. Yin,et al.  Three-dimensional graphene materials: preparation, structures and application in supercapacitors , 2014 .

[25]  Akira Watanabe,et al.  Laser Direct Writing of a High-Performance All-Graphene Humidity Sensor Working in a Novel Sensing Mode for Portable Electronics. , 2018, ACS applied materials & interfaces.

[26]  Vojko Matko,et al.  Software and Equipment for Remote Testing of Sensors , 2007, Sensors (Basel, Switzerland).

[27]  Wei Wang,et al.  3D graphene foams decorated by CuO nanoflowers for ultrasensitive ascorbic acid detection. , 2014, Biosensors & bioelectronics.

[28]  Fan Zhang,et al.  Three-dimensionally bonded spongy graphene material with super compressive elasticity and near-zero Poisson’s ratio , 2015, Nature Communications.

[29]  Denis Donlagic,et al.  Sensor for high-air-humidity measurement , 1996 .

[30]  M. Dresselhaus,et al.  Ultrahigh humidity sensitivity of graphene oxide , 2013, Scientific Reports.

[31]  Gautam K. Naik,et al.  Room-Temperature Humidity Sensing Using Graphene Oxide Thin Films , 2016 .

[32]  C. N. R. Rao,et al.  NO2 and humidity sensing characteristics of few-layer graphenes , 2009, 0905.2852.

[33]  Weiping Chen,et al.  A Capacitive Humidity Sensor Based on Multi-Wall Carbon Nanotubes (MWCNTs) , 2009, Sensors.

[34]  Hui-Ming Cheng,et al.  High Sensitivity Gas Detection Using a Macroscopic Three-Dimensional Graphene Foam Network , 2011, Scientific reports.

[35]  Tengfei Zhang,et al.  Macroscopic and direct light propulsion of bulk graphene material , 2015 .

[36]  Nae-Eung Lee,et al.  Transparent, stretchable, and rapid-response humidity sensor for body-attachable wearable electronics , 2017, Nano Research.

[37]  Tengfei Zhang,et al.  Highly Reversible and Recyclable Absorption under Both Hydrophobic and Hydrophilic Conditions using a Reduced Bulk Graphene Oxide Material , 2016, Advanced materials.

[38]  Subi J. George,et al.  Ultrafast response humidity sensor using supramolecular nanofibre and its application in monitoring breath humidity and flow , 2014, Scientific Reports.

[39]  W. Wong,et al.  Polyvinyl alcohol coated photonic crystal optical fiber sensor for humidity measurement , 2012 .

[40]  Yongsheng Chen,et al.  Three-dimensional graphene networks: synthesis, properties and applications , 2015 .