Influence of 3D printing process parameters on the tribological properties of acrylic resin

[1]  W. Xing,et al.  Optimization of UV-curable alumina suspension for digital light processing of ceramic membranes , 2021, Journal of Membrane Science.

[2]  M. Rodrigues,et al.  Additive manufacturing of ceramic alumina/calcium phosphate structures by DLP 3D printing , 2021, Materials Chemistry and Physics.

[3]  Fatema Tuj Zohura,et al.  Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel , 2021, Journal of Materials Research and Technology.

[4]  S. Ibrić,et al.  The evaluation of the effect of different superdisintegrants on the drug release from FDM 3D printed tablets through different applied strategies: in vitro-in silico assessment. , 2021, International journal of pharmaceutics.

[5]  J. E. Lee,et al.  High-temperature 3D printing of polyetheretherketone products: Perspective on industrial manufacturing applications of super engineering plastics , 2021, Materials & Design.

[6]  Xin Jia,et al.  Three‐dimensional printing of high‐performance polyimide by direct ink writing of hydrogel precursor , 2021 .

[7]  Zhongying Ji,et al.  Facile Photo and Thermal Two-Stage Curing for High-Performance 3D Printing of Poly(Dimethylsiloxane). , 2020, Macromolecular rapid communications.

[8]  Wei-min Liu,et al.  Additively manufacturing high-performance bismaleimide architectures with ultraviolet-assisted direct ink writing , 2019, Materials & Design.

[9]  W. Xu,et al.  Preparation of Fluoroalkyl-Acrylate-Modified Polysiloxane Nanocomposite and Its Surface Properties as a Superhydrophobic Coating Material , 2019, Coatings.

[10]  J. Bao,et al.  Acrylate-based photosensitive resin for stereolithographic three-dimensional printing , 2019, Journal of Applied Polymer Science.

[11]  C. Culmone,et al.  Additive manufacturing of medical instruments: A state-of-the-art review , 2019, Additive Manufacturing.

[12]  Zhongying Ji,et al.  3D Printing of an Oil/Water Mixture Separator with In Situ Demulsification and Separation , 2019, Polymers.

[13]  Li Yang,et al.  3D printing of ceramics: A review , 2019, Journal of the European Ceramic Society.

[14]  Feng Zhou,et al.  Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage , 2019, Advanced Engineering Materials.

[15]  Kanchana J,et al.  Multi response optimization of process parameters using grey relational analysis for milling of hardened Custom 465 steel , 2019, Procedia Manufacturing.

[16]  Sandeep Kumar,et al.  Evaluation of Shear Bond Strength of Three Different Acrylic Resin and Artificial Denture Teeth with and without Monomer Application. , 2019, The journal of contemporary dental practice.

[17]  Yuanjie Zhang,et al.  Effect of Surface Treatment on Flexural and Tribological Properties of Poly(p-phenylene Benzobisoxazole)/Polyimide Composites under Normal and Elevated Temperature , 2018, Materials.

[18]  Yue Zhang,et al.  An optimization method for multi-objective and multi-factor designing of a ceramic slurry: Combining orthogonal experimental design with artificial neural networks , 2018, Ceramics International.

[19]  H. Liao,et al.  Simulation of Stress Field during the Selective Laser Melting Process of the Nickel-Based Superalloy, GH4169 , 2018, Materials.

[20]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[21]  Rupinder Singh,et al.  Investigations for Thermal and Electrical Conductivity of ABS-Graphene Blended Prototypes , 2017, Materials.

[22]  Jianjun Guo,et al.  Thermal and mechanical properties of polyamide 12/graphene nanoplatelets nanocomposites and parts fabricated by fused deposition modeling , 2017 .

[23]  Jianhua Zhou,et al.  Fluorosilicone modified polyacrylate emulsifier-free latex: Synthesis, properties, and application in fabric finishing , 2017, Fibers and Polymers.

[24]  Peter C. Sherrell,et al.  Mesoscale design of multifunctional 3D graphene networks , 2016 .

[25]  M. Berggren,et al.  Patterning and Conductivity Modulation of Conductive Polymers by UV Light Exposure , 2016 .

[26]  C. Emmelmann,et al.  Additive Manufacturing of Metals , 2016 .

[27]  Flaviana Calignano,et al.  3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles , 2016, Advanced materials.

[28]  Jeffrey W Stansbury,et al.  3D printing with polymers: Challenges among expanding options and opportunities. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[29]  A. F. Silva,et al.  Fused deposition modeling with polypropylene , 2015 .

[30]  Yanan Zhang,et al.  Multi-objective optimization of process parameters for biological 3D printing composite forming based on SNR and grey correlation degree , 2015 .

[31]  Onur Yilmaz,et al.  A hybrid polyacrylate/OMMT nanocomposite latex: Synthesis, characterization and its application as a coating binder , 2014 .

[32]  Tianjiang Hu,et al.  Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design , 2013, Adv. Robotics.

[33]  W. Xu,et al.  Synthesis, Film Morphology, and Performance of Cationic Fluorinated Polyacrylate Emulsion with Core-Shell Structure , 2012 .

[34]  C. Chua,et al.  Effects of layer thickness and binder saturation level parameters on 3D printing process , 2011 .

[35]  Jian Li,et al.  The effect of carbon fiber content on the friction and wear properties of carbon fiber reinforced polyimide composites , 2008 .