Multiphase flow model and experimental study of pressure swing distillation for low pressure process of hydrochloric/water separation in hydrogen production

Abstract Extraction of water from a concentrated HCl(aq) azeotropic solution is one of the challenging processes in recycling of anolyte within the copper-chlorine (Cu-Cl) cycle of hydrogen production. To pass the azeotropic point, a distillation process needs to take place in high pressure and low pressure columns. In this paper, a new lab-scale pressure swing distillation unit (PSDU) is developed and presented. The low pressure side of the PSDU is operated as a batch process to separate HCl(aq). A dynamic model for this process is formulated. Currently there is a lack of experimental data for this process so this study presents new measured data for the separation of HCl(aq). During the experiment, the temperature and concentration profiles are recorded as a bench-mark for reference in further next studies. The predictive model is verified with experimental results. The results of the experiments and simulations are provided, compared and discussed. The simulation results show reasonable agreement with the experimental data.

[1]  Jens-Uwe Repke,et al.  Separation of Homogeneous Azeotropic Mixtures by Pressure Swing Distillation – Analysis of the Operation Performance , 2005 .

[2]  Peizhe Cui,et al.  Heat-Integrated Pressure-Swing-Distillation Process for Separation of Tetrahydrofuran/Methanol with Different Feed Compositions , 2014 .

[3]  Endre Rev,et al.  Computing multiple steady states in homogeneous azeotropic and ideal two‐product distillation , 2011 .

[4]  William L. Luyben.  Control of a Heat-Integrated Pressure-Swing Distillation Process for the Separation of a Maximum-Boiling Azeotrope , 2014 .

[5]  Zhigang Lei,et al.  Process improvement on separating C4 by extractive distillation , 2002 .

[6]  Xin Li,et al.  Effect of feed temperature on economics and controllability of pressure-swing distillation for separating binary azeotrope , 2016 .

[7]  Hao Yu,et al.  Heat-Integrated Pressure-Swing Distillation Process for Separation of a Maximum-Boiling Azeotrope Ethylenediamine/Water , 2016 .

[8]  Wei Wei,et al.  Design and Control of Dimethyl Carbonate–Methanol Separation via Pressure-Swing Distillation , 2013 .

[9]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[10]  Weisong Li,et al.  Comparison of Pressure-Swing Distillation and Extractive Distillation Methods for Isopropyl Alcohol/Diisopropyl Ether Separation , 2014 .

[11]  Günter Wozny,et al.  Pressure swing batch distillation for homogeneous azeotropic separation , 2007 .

[12]  William L. Luyben,et al.  Control of a multiunit heterogeneous azeotropic distillation process , 2006 .

[13]  William L. Luyben,et al.  Comparison of extractive distillation and pressure-swing distillation for acetone/chloroform separation , 2013, Comput. Chem. Eng..

[14]  Zhigang Lei,et al.  Extractive distillation with the mixture of ionic liquid and solid inorganic salt as entrainers , 2014 .

[15]  Greg F. Naterer.  Advanced Heat Transfer , 2018 .

[16]  Qunxiong Zhu,et al.  Adding rectifying/stripping section type heat integration to a pressure-swing distillation (PSD) process , 2008 .

[17]  Ibrahim Dincer,et al.  Azeotropic pressure swing distillation of hydrochloric-water for hydrogen production in the Cu Cl cycle: Thermodynamic and design methods , 2019, International Journal of Hydrogen Energy.

[18]  Ibrahim Dincer,et al.  Performance analysis of a supercritical water-cooled nuclear reactor integrated with a combined cycle, a Cu-Cl thermochemical cycle and a hydrogen compression system , 2017 .

[19]  Sang Jin Park,et al.  Optimizations and heat integrations on the separation of toluene and 1-butanol azeotropic mixture by pressure swing distillation , 2016 .

[20]  Rafiqul Gani,et al.  A generalized model for distillation columns—I: Model description and applications , 1986 .

[21]  Ibrahim Dincer,et al.  Thermodynamic model of pressure swing distillation for a high pressure process of hydrochloric/water separation and hydrogen production , 2019, International Journal of Hydrogen Energy.

[22]  Wei Liu,et al.  Design and control of pressure-swing distillation for azeotropes with different types of boiling behavior at different pressures , 2016 .

[23]  G. Naterer,et al.  Photo-electro-chemical chlorination of cuprous chloride with hydrochloric acid for hydrogen production , 2012 .

[24]  Ibrahim Dincer,et al.  Progress in thermochemical hydrogen production with the copper–chlorine cycle , 2015 .

[25]  Ibrahim Dincer,et al.  Thermodynamic assessment of a lab-scale experimental copper-chlorine cycle for sustainable hydrogen production , 2019, International Journal of Hydrogen Energy.

[26]  Jungho Cho,et al.  Optimization study of pressure-swing distillation for the separation process of a maximum-boiling azeotropic system of water-ethylenediamine , 2015, Korean Journal of Chemical Engineering.

[27]  Peter Lang,et al.  Separation of an acetone-methanol mixture by pressure-swing batch distillation in a double-column system with and without thermal integration , 2010 .

[28]  Michael F. Doherty,et al.  A new pressure-swing-distillation process for separating homogeneous azeotropic mixtures , 1992 .

[29]  Jungho Cho,et al.  Modeling and Optimization Study of Pressure-Swing Distillation for the Separation Process of Acetone–Methanol Mixture with Vapor–Liquid Equilibrium Analysis , 2016 .

[30]  Huajiang Huang,et al.  A review of separation technologies in current and future biorefineries , 2008 .

[31]  William L. Luyben.  Methanol/Trimethoxysilane Azeotrope Separation Using Pressure-Swing Distillation , 2014 .

[32]  William L. Luyben,et al.  Pressure-Swing Distillation for Minimum- and Maximum-Boiling Homogeneous Azeotropes , 2012 .

[33]  W. Shen,et al.  Systematic design of an extractive distillation for maximum‐boiling azeotropes with heavy entrainers , 2015 .

[34]  Endre Rev,et al.  Column configurations of continuous heterogeneous extractive distillation , 2007 .

[35]  Ibrahim Dincer,et al.  Recent Canadian advances in nuclear-based hydrogen production and the thermochemical Cu–Cl cycle , 2009 .

[36]  Ibrahim Dincer,et al.  Advances in unit operations and materials for the Cu–Cl cycle of hydrogen production , 2017 .

[37]  Luo Binbin,et al.  Control of fully heat-integrated pressure swing distillation for separating isobutyl alcohol and isobutyl acetate , 2016 .

[38]  Yinglong Wang,et al.  Control of Heat Integrated Pressure-Swing-Distillation Process for Separating Azeotropic Mixture of Tetrahydrofuran and Methanol , 2015 .

[39]  Juan B. Montón,et al.  Separation of isobutyl alcohol and isobutyl acetate by extractive distillation and pressure-swing distillation: Simulation and optimization , 2006 .

[40]  Antonio Flores-Tlacuahuac,et al.  Modeling, simulation and control of an internally heat integrated pressure-swing distillation process for bioethanol separation , 2011, Comput. Chem. Eng..

[41]  Amiya K. Jana,et al.  A hybrid heat integration scheme for bioethanol separation through pressure-swing distillation route , 2015 .

[42]  Zhigang Lei,et al.  Extractive distillation with ionic liquids: A review , 2014 .

[43]  Francisco J. L. Castillo,et al.  Optimal design of complex azeotropic distillation columns , 2000 .

[44]  Günter Wozny,et al.  Time optimal start-up strategies for reactive distillation columns , 2004 .