Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators

Numerical and experimental analyses were carried out to study the heat transfer and flow in the plate-fin and tube heat exchangers with inclined block shape vortex generators mounted behind the tubes. The effects of different span angles α (α=30°, 45° and 60°) are investigated in detail for the Reynolds number ranging from 400 to 3000. Numerical simulation was performed by a 3D turbulence analysis of the heat transfer and fluid flow. Experiments were carried out by an infrared thermovision and a water tunnel system, respectively, to visualize the temperature distribution and local flow structure. The results indicated that the proposed heat transfer enhancement technique is able to generate longitudinal vortices and to improve the heat transfer performance in the wake regions. The case of α=45° provides the best heat transfer augmentation. A reduction in fin area of 25% may be obtained if vortex generators embedded fins are used in place of plain fins at ReDh=500.

[1]  M. Fiebig,et al.  Numerical analysis of heat transfer and flow loss in a parallel plate heat exchanger element with longitudinal vortex generators as fins , 1995 .

[2]  R. Shah,et al.  Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress , 1995 .

[3]  Ahmad Sohankar, Lars Davidson,et al.  EFFECT OF INCLINED VORTEX GENERATORS ON HEAT TRANSFER ENHANCEMENT IN A THREE-DIMENSIONAL CHANNEL , 2001 .

[4]  John K. Eaton,et al.  Experimental study of the development of longitudinal vortex pairs embedded in a turbulent boundary layer , 1987 .

[5]  Antonios Liakopoulos,et al.  Explicit Representations of the Complete Velocity Profile in a Turbulent Boundary Layer , 1984 .

[6]  Chi-Chuan Wang,et al.  Flow visualization of annular and delta winlet vortex generators in fin-and-tube heat exchanger application , 2002 .

[7]  Koichi Nishino,et al.  Heat transfer enhancement accompanying pressure-loss reduction with winglet-type vortex generators for fin-tube heat exchangers. , 2002 .

[8]  Martin Fiebig,et al.  Heat Transfer Enhancement by Longitudinal Vortices in a Fin-Tube Heat Exchanger Element With Flat Tubes , 1996 .

[9]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[10]  Martin Fiebig,et al.  Wing-type vortex generators for fin-and-tube heat exchangers , 1993 .

[11]  M. Fiebig,et al.  Experimental investigations of heat transfer enhancement and flow losses in a channel with double rows of longitudinal vortex generators , 1993 .

[12]  Ten-See Wang,et al.  Unified Navier-Stokes flowfield and performance analysis of liquid rocket engines , 1993 .

[13]  Anthony M. Jacobi,et al.  Heat Transfer Enhancement by Delta-Wing-Generated Tip Vortices in Flat-Plate and Developing Channel Flows , 2002 .

[14]  John K. Eaton,et al.  Heat Transfer Effects of a Longitudinal Vortex Embedded in a Turbulent Boundary Layer , 1984 .

[15]  P. A. Eibeck,et al.  An experimental investigation of the heat-transfer effects of a longitudinal vortex embedded in a turbulent boundary layer , 1985 .

[16]  Chien-Nan Lin,et al.  Conjugate Heat Transfer and Fluid Flow Analysis in Fin-Tube Heat Exchangers with Wave-Type Vortex Generators , 2002 .

[17]  F. J. Edwards,et al.  THE IMPROVEMENT OF FORCED CONVECTION SURFACE HEAT TRANSFER USING SURFACE PROTRUSIONS IN THE FORM OF (A) CUBES AND (B) VORTEX GENERATORS , 1974 .

[18]  Koichi Nishino,et al.  Numerical and experimental determination of flow structure and heat transfer effects of longitudinal vortices in a channel flow , 1996 .