LTD Stirling engine with regenerator. Numerical and experimental study

In this paper, a model of a low temperature difference (LTD) Stirling engine with regenerator is presented. The equations governing the heat transfer and the compressible fluid dynamics are solved numerically as a coupled system, including the ideal gas state equation, Navier Stokes equations and energy balance. The engine cycle induces flow compression, expansion and regeneration in free volumes and through porous media. The present developed CFD model makes possible to obtain the instantaneous values of the physical parameters (pressure, temperature, velocity, density, etc.). With these obtained values, the continuous p-V cycle can be analysed which leads to the mechanical work calculation. The results of the simulation concerning an engine with regeneration is compared to those obtained in previous work by an engine without regeneration and validated with experimental data obtained under similar conditions without regeneration. The preliminary results show the important improvement due to the engine regeneration operation and the related regenerator porosity effect allowing the reduction of the pressure drop and viscous dissipation.

[1]  Halit Karabulut,et al.  Thermodynamic analysis of the V-type Stirling-cycle refrigerator , 2005 .

[2]  Terrence W. Simon,et al.  A 2-D CFD model of oscillatory flow with jets impinging on a random wire regenerator matrix , 2002, IECEC '02. 2002 37th Intersociety Energy Conversion Engineering Conference, 2002..

[3]  Mohand Tazerout,et al.  Experimental investigations of a gamma Stirling engine , 2012 .

[4]  Somchai Wongwises,et al.  Investigation on power output of the gamma-configuration low temperature differential Stirling engines , 2005 .

[6]  S. M. Ghiaasiaan,et al.  Anisotropic steady-flow hydrodynamic parameters of microporous media applied to pulse tube and Stirling cryocooler regenerators , 2008 .

[7]  Chin-Hsiang Cheng,et al.  Numerical model for predicting thermodynamic cycle and thermal efficiency of a beta-type Stirling engine with rhombic-drive mechanism , 2010 .

[8]  Somchai Wongwises,et al.  Performance of low-temperature differential Stirling engines , 2007 .

[9]  P. Rochelle,et al.  Analytical Solutions and Optimization of the Exo-Irreversible Schmidt Cycle with Imperfect Regeneration for the 3 Classical Types of Stirling Engine , 2011 .

[10]  M. Ahmadi,et al.  Evaluation of the maximized power of a regenerative endoreversible Stirling cycle using the thermodynamic analysis , 2013 .

[11]  Jincan Chen,et al.  Influence of several irreversible losses on the performance of a ferroelectric Stirling refrigeration-cycle , 2002 .

[12]  Allan J. Organ,et al.  The Regenerator and the Stirling Engine , 1997 .

[13]  Lingen Chen,et al.  Optimum performance of irreversible stirling engine with imperfect regeneration , 1998 .

[14]  M. Seul,et al.  Ordering Transitions in Thin, Freely-Suspended Phospholipid Films , 1995 .

[15]  Artin Der Minassians,et al.  Multiphase Free-Piston Stirling Engine for Solar-Thermal-Electric Power Generation Applications , 2007 .

[16]  Henrik Carlsen,et al.  Preliminary results from simulations of temperature oscillations in Stirling engine regenerator matrices , 2006 .

[17]  Charles Harman,et al.  Application of the Direct Method to irreversible Stirling cycles with finite speed , 2002 .

[18]  Iskander Tlili,et al.  Thermodynamic analysis of the Stirling heat engine with regenerative losses and internal irreversibilities , 2008 .

[19]  J. R. Senft,et al.  Theoretical limits on the performance of Stirling engines , 1998 .