Synthesis and structural characterization of MoS2 nanospheres and nanosheets using solvothermal method

This paper reports the solvothermal synthesis of MoS2 nanospheres and nanosheets. The nanospheres were obtained using ammonium polysulfide as a sulfur source and have a mean diameter of about 100 nm. The nanosheets were assembled from a few lamellar layers and were obtained using thiourea as a sulfur source. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were used in order to characterize the prepared powders. Conglomerate size and stability of the synthesized samples in hexane were studied with zeta potential. The four-ball method was used to assess the lubricating effect when these materials were used as additives in engine oil dispersions. The topography of the wear scar was analyzed using SEM, EDX, and 3D surface profilometry. The tribological properties of base engine oil containing the nanomaterials penetrated more easily into the interface space, and it formed a tribo-film at contact interface. The tribological performance showed that the synthesized nanosheets had superior anti-wear and friction-reducing properties as a lubrication additive compared with nanospheres, and the wear scar of balls lubricated with nanospheres revealed larger width compared to nanosheets. From the results, it is observed that nanosheets dispensed in oil have better tribological performance compared to nanospheres oil in terms of capability to reduce wear.

[1]  P. K. Rajendrakumar,et al.  Evaluation of the tribological and thermo-physical properties of coconut oil added with MoS2 nanoparticles at elevated temperatures , 2015 .

[2]  M. Kalin,et al.  Lubrication of DLC-coated surfaces with MoS2 nanotubes in all lubrication regimes: Surface roughness and running-in effects , 2013 .

[3]  A. Vlaicu,et al.  Structural and photocatalytic properties of iron- and europium-doped TiO2 nanoparticles obtained under hydrothermal conditions , 2008 .

[4]  Zhi-Qian Chen,et al.  Simple solution route to uniform MoS2 particles with randomly stacked layers , 2004 .

[5]  Y. Azli,et al.  The Effect of Temperature on the Tribological Behavior of RBD Palm Stearin , 2012 .

[6]  Weijun Li,et al.  Electrochemical lithiation/delithiation performances of 3D flowerlike MoS2 powders prepared by ionic liquid assisted hydrothermal route , 2009 .

[7]  G. Amaratunga,et al.  Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear , 2000, Nature.

[8]  J. Livage,et al.  Hydrothermal synthesis of amorphous MoS2nanofiber bundles via acidification of ammonium heptamolybdate tetrahydrate , 2007, Nanoscale research letters.

[9]  B. Bhushan,et al.  Effect of MoS2 and WS2 Nanotubes on Nanofriction and Wear Reduction in Dry and Liquid Environments , 2013, Tribology Letters.

[10]  S. K. Biswas,et al.  Friction between a Steel Ball and a Steel Flat Lubricated by MoS2 Particles Suspended in Hexadecane at 150 degrees C , 2012 .

[11]  Yadong Li,et al.  MoS2 Nanostructures: Synthesis and Electrochemical Mg2+ Intercalation. , 2004 .

[12]  Mitjan Kalin,et al.  Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives , 2012 .

[13]  Samir Bensaid,et al.  MoS2 nanoparticle precipitation in turbulent micromixers , 2012 .

[14]  Wolfgang Tremel,et al.  Understanding the Tribochemical Mechanisms of IF-MoS2 Nanoparticles Under Boundary Lubrication , 2011 .

[15]  Ya Dong Li,et al.  Formation of MoS2 inorganic fullerenes (IFs) by the reaction of MoO3 nanobelts and S. , 2003, Chemistry.

[16]  Tarik Chafik,et al.  Effect of electrolytes nature and concentration on the morphology and structure of MoS2 nanomaterials prepared using one-pot solvothermal method , 2014 .

[17]  Lev Rapoport,et al.  Applications of WS2(MoS2) inorganic nanotubes and fullerene-like nanoparticles for solid lubrication and for structural nanocomposites , 2005 .

[18]  R. Tenne,et al.  The Effect of WS2 Nanoparticles on Friction Reduction in Various Lubrication Regimes , 2004 .

[19]  R. Tenne,et al.  High Lubricity of Re-Doped Fullerene-Like MoS2 Nanoparticles , 2012, Tribology Letters.

[20]  S. K. Biswas,et al.  Effect of Layered MoS2 Nanoparticles on the Frictional Behavior and Microstructure of Lubricating Greases , 2013, Tribology Letters.

[21]  K. Suslick,et al.  Sonochemical Synthesis of Nanostructured Molybdenum Sulfide. , 1998 .

[22]  J. M. Thorp.  Four-ball assessment of deep drawing oils , 1975 .

[23]  R. Tenne,et al.  Friction of fullerene-like WS2 nanoparticles: effect of agglomeration , 2006 .

[24]  F. Dassenoy,et al.  IF-MoS2 based lubricants: Influence of size, shape and crystal structure , 2012 .

[25]  Yuqi Wang,et al.  Synthesis and tribological properties of flower-like MoS2 microspheres , 2014 .

[26]  Benjamin J. Carey,et al.  Investigation of Two-Solvent Grinding-Assisted Liquid Phase Exfoliation of Layered MoS2 , 2015 .

[27]  Yufu Xu,et al.  Tribological Properties of MoS2 with Different Morphologies in High-Density Polyethylene , 2012, Tribology Letters.

[28]  Yufu Xu,et al.  The Effect of Morphology on the Tribological Properties of MoS2 in Liquid Paraffin , 2010 .

[29]  R. Tenne,et al.  Inorganic fullerene-like material as additives to lubricants: structure–function relationship , 1999 .

[30]  P. Afanasiev,et al.  Sonochemical Preparation of MoS2 in Aqueous Solution: Replication of the Cavitation Bubbles in an Inorganic Material Morphology , 2005 .

[31]  R. Tenne,et al.  Sedimentation of IF-WS2 aggregates and a reproducibility of the tribological data , 2007 .

[32]  Yufu Xu,et al.  Morphological Influence of Molybdenum Disulfide on the Tribological Properties of Rapeseed Oil , 2013, Tribology Letters.

[33]  R. Tenne,et al.  Polyhedral and cylindrical structures of tungsten disulphide , 1992, Nature.

[34]  Fengmin Wu,et al.  From MoS2 Microspheres to α‐MoO3 Nanoplates: Growth Mechanism and Photocatalytic Activities , 2014 .

[35]  Bibhutosh Adhikary,et al.  Synthesis of nanocrystalline iron oxide ultrathin films by thermal decomposition of iron nitropruside: Structural and optical properties , 2010 .

[36]  Zhengshui Hu,et al.  Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium , 2007 .

[37]  Xiaofei Yang,et al.  Synthesis and tribological properties of NbSe3 nanofibers and NbSe2 microsheets , 2011 .

[38]  D. Fino,et al.  Synthesis, characterization and environmental assessment of nanosized MoS2 particles for lubricants applications , 2012 .

[39]  R. Tenne,et al.  High-Rate, Gas-Phase Growth of MoS2 Nested Inorganic Fullerenes and Nanotubes , 1995, Science.

[40]  Yadong Li,et al.  MoS2 Nanostructures: Synthesis and Electrochemical Mg2+ Intercalation , 2004 .