论文信息 - On the meniscus deformation when the pulsed voltage is applied

On the meniscus deformation when the pulsed voltage is applied

Abstract Effect of the pulsed voltage on the meniscus deformation was investigated. Results show that both the pulsed voltage and its width as well as the bias voltage affected the behaviour of spraying. There appeared three spraying modes, e.g. dripping, pulsating jet and cone-jet. Cone-jet has been created by applying a pulsed voltage of 1.5 kV to a bias voltage of 5.0 kV for 300 ms.

J. L. Li | J. L. Li

[1] W. Balachandran,et al. Electrostatic generation and theoretical modelling of ultra fine spray of ceramic suspensions for thin film preparation , 2001 .

[2] A. Gomez,et al. On the structure of an electrostatic spray of monodisperse droplets , 1994 .

[3] J. M. Grace,et al. A review of liquid atomization by electrical means , 1994 .

[4] Geoffrey Ingram Taylor,et al. Disintegration of water drops in an electric field , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[5] John Zeleny,et al. Instability of Electrified Liquid Surfaces , 1917 .

[6] M. Edirisinghe,et al. Evaporation of liquid during cone-jet mode electrospraying , 2002 .

[7] M. Cloupeau,et al. ELECTROHYDRODYNAMIC SPRAYING FUNCTIONING MODES - A CRITICAL-REVIEW , 1994 .

[8] M. Cloupeau,et al. Characteristic forms of electrified menisci emitting charges , 1986 .

[9] Mohan Edirisinghe,et al. Development of ceramic inks for direct continuous jet printing , 2005 .

[10] M. Cloupeau,et al. Deformation of liquid menisci under the action of an electric field , 1982 .

[11] D. J. Brunner,et al. ELECTROHYDRODYNAMIC ATOMIZATION IN THE CONE–JET MODE PHYSICAL MODELING OF THE LIQUID CONE AND JET , 1997 .

[12] V. Shtern,et al. Striking features of fluid flows in taylor cones related to electrosprays , 1994 .