Aqueous-phase furfural-acetone aldol condensation over basic mixed oxides

Abstract Catalytic aqueous-phase aldol-condensation of acetone and furfural has been studied in this work. Three different mixed-oxides catalysts (Mg–Zr, Mg–Al and Ca–Zr, with different basic sites distribution) were studied, their activity and selectivity being correlated with their physico-chemical properties. Catalysts with the highest concentration of basic sites (especially medium-strength basic sites) are the most active and selective for the C13 fraction, whereas molar ratios of 1:1 yield the highest selectivities for C13 fraction (more than 60% atomic yield for the Mg–Zr mixed oxide). Concerning to reaction mechanism, cis isomers are the first ones formed, whereas trans isomers are the most abundant at higher reaction times. The main causes of catalysts deactivation are the modification of the physico-chemical properties of catalysts – because of the interaction with water – and in minor extent, the leaching effect; although homogeneous catalytic effects are discarded at studied conditions. The products formed, and the kinetic dependence on reactant concentration, are consistent with a catalytic mechanism in which the rate-determining step is the formation of the enolate species. The model considers consecutive reversible reactions yielding C8, in the first step, and C13, in the second step; with a first-order dependence on the species with α-hydrogen (acetone and C8), and zero-th order on those species without it (furfural and C13).

[1]  O. Solcova,et al.  Preparation of MgO catalytic support in shaped mesoporous high surface area form , 2004 .

[2]  D. M. Alonso,et al.  Catalytic conversion of biomass to biofuels , 2010 .

[3]  M. Kaltschmitt,et al.  Next-generation biofuels: Survey of emerging technologies and sustainability issues. , 2010, ChemSusChem.

[4]  Yuhan Sun,et al.  Mesoporous CaO-ZrO2 nano-oxides : A novel solid base with high activity and stability , 2009 .

[5]  V. Gómez-Serrano,et al.  Basic metal–carbons catalysts prepared by sol–gel method , 2004 .

[6]  P. Marcus,et al.  Oxidation of magnesium , 2002 .

[7]  Wei Qi,et al.  Production of jet and diesel fuel range alkanes from waste hemicellulose-derived aqueous solutions , 2010 .

[8]  Beatriz Padilla Vivas,et al.  Minimization of the deactivation of palladium catalysts in the hydrodechlorination of trichloroethylene in wastewaters , 2010 .

[9]  D. Murzin,et al.  Valorization of cellulose over metal supported mesoporous materials , 2011 .

[10]  R. Dziembaj,et al.  Aldol condensation of citral and acetone over mesoporous catalysts obtained by thermal and chemical activation of magnesium–aluminum hydrotalcite-like precursors , 2006 .

[11]  Changwei Hu,et al.  One-step production of biodiesel from Nannochloropsis sp. on solid base Mg–Zr catalyst , 2011 .

[12]  Christian Gärtner,et al.  Carbon–carbon bond formation for biomass-derived furfurals and ketones by aldol condensation in a biphasic system , 2008 .

[13]  Ye Sun,et al.  Hydrolysis of lignocellulosic materials for ethanol production: a review. , 2002, Bioresource technology.

[14]  J. Sueiras,et al.  Aldol condensation of campholenic aldehyde and MEK over activated hydrotalcites , 2007 .

[15]  A. K. Tyagi,et al.  Facile synthesis of ZrO2 powders: Control of morphology , 2007 .

[16]  James A. Dumesic,et al.  Single-reactor process for sequential aldol-condensation and hydrogenation of biomass-derived compounds in water , 2006 .

[17]  Salvador Ordóñez,et al.  Performance of bifunctional Pd/MxNyO (M = Mg, Ca; N = Zr, Al) catalysts for aldolization–hydrogenation of furfural–acetone mixtures , 2011 .

[18]  G. Huber,et al.  Production of Liquid Alkanes by Aqueous-Phase Processing of Biomass-Derived Carbohydrates , 2005, Science.

[19]  S. Ordóñez,et al.  Adsorption of CO2 on Hydrotalcite-Derived Mixed Oxides: Sorption Mechanisms and Consequences for Adsorption Irreversibility , 2010 .

[20]  James A. Dumesic,et al.  An overview of aqueous-phase catalytic processes for production of hydrogen and alkanes in a biorefinery , 2006 .

[21]  Matthew Neurock,et al.  Molecular heterogeneous catalysis , 2006 .

[22]  H. S. Fogler,et al.  Elements of Chemical Reaction Engineering , 1986 .

[23]  Landong Li,et al.  Nitridation of BaO supported on mesoporous materials: Basicity characterization and catalytic properties , 2011 .

[24]  S. Ordóñez,et al.  Consequences of the iron–aluminium exchange on the performance of hydrotalcite-derived mixed oxides for ethanol condensation , 2011 .

[25]  J. I. D. Cosimo,et al.  Allylic alcohol synthesis by gas-phase hydrogen transfer reduction of unsaturated ketones , 2005 .

[26]  J. I. D. Cosimo,et al.  Aldol condensation of citral with acetone on MgO and alkali-promoted MgO catalysts , 2006 .

[27]  F. Arena,et al.  A characterization study of the surface acidity of solid catalysts by temperature programmed methods , 1998 .

[28]  K. Y. Foo,et al.  Decontamination of textile wastewater via TiO2/activated carbon composite materials. , 2010, Advances in colloid and interface science.

[29]  Alberto Marinas,et al.  Magnesium-containing mixed oxides as basic catalysts: base characterization by carbon dioxide TPD–MS and test reactions , 2004 .

[30]  Wan Mohd Ashri Wan Daud,et al.  Biodiesel production using alumina-supported calcium oxide: An optimization study , 2010 .

[31]  R. Dziembaj,et al.  Influence of thermal treatment conditions on the activity of hydrotalcite-derived Mg–Al oxides in the aldol condensation of acetone , 2005 .

[32]  Avelino Corma,et al.  Synergies between bio- and oil refineries for the production of fuels from biomass. , 2007, Angewandte Chemie.

[33]  J. Fierro,et al.  Catalytic and structural properties of co-precipitated Mg–Zr mixed oxides for furfural valorization via aqueous aldol condensation with acetone , 2011 .