Nanomolar detection limits of Cd²⁺, Ag⁺, and K⁺ using paper-strip ion-selective electrodes.

Paper-based ion-selective electrodes (ISEs) are simple, flexible, and cost-efficient in comparison to conventional solid-contact ISEs. Yet, paper-based ISEs have poor limits of detection (in the micromolar range) relative to conventional solid-contact ISEs. Here we describe the construction and optimization of ISEs based on commercially available filter paper modified with single-walled carbon nanotubes (SWCNTs), sputtered gold, and conductive polymer poly(3-octylthiophene) to support an ion-selective membrane. The ion-selective membrane presented here is based on the copolymer methyl methacrylate-decyl methacrylate (MMA-DMA). The copolymer MMA-DMA is highly water-repellent and has a low coefficient of diffusion, which makes it particularly suitable for the creation of sensors with high performance in reaching low limits of detection. Three different configurations of the electrodes have been characterized by using contact angle surface analysis, oxygen influence, and testing for the presence of a water layer. Paper-strip ISEs for cadmium, silver, and potassium ions were developed with groundbreaking limits of detection of 1.2, 25.1, and 11.0 nM, respectively. In addition to such low limits of detection, paper-strip ISEs display high selectivity for their ion of interest and high reproducibility.

[1]  N. D. de Rooij,et al.  Potential Drifts of Solid‐Contacted Ion‐Selective Electrodes Due to Zero‐Current Ion Fluxes Through the Sensor Membrane , 2000 .

[2]  H. Karimi-Maleh,et al.  A new strategy for determination of hydroxylamine and phenol in water and waste water samples using modified nanosensor , 2013, Environmental Science and Pollution Research.

[3]  Yi Cui,et al.  Printed energy storage devices by integration of electrodes and separators into single sheets of paper , 2010 .

[4]  Yi Cui,et al.  Highly conductive paper for energy-storage devices , 2009, Proceedings of the National Academy of Sciences.

[5]  D. C. Tiwari,et al.  Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan , 2013 .

[6]  Ernö Pretsch,et al.  Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range , 2004 .

[7]  W. Dungchai,et al.  Lab-on-paper with dual electrochemical/colorimetric detection for simultaneous determination of gold and iron. , 2010, Analytical chemistry.

[8]  G. Whitesides,et al.  Patterned paper as a platform for inexpensive, low-volume, portable bioassays. , 2007, Angewandte Chemie.

[9]  Phaedon Avouris,et al.  Deformation of carbon nanotubes by surface van der Waals forces , 1998 .

[10]  A. Michalska,et al.  Lowering the Detection Limit of Ion-Selective Plastic Membrane Electrodes with Conducting Polymer Solid Contact and Conducting Polymer Potentiometric Sensors , 2003 .

[11]  Ernö Pretsch,et al.  Potentiometric biosensing of proteins with ultrasensitive ion-selective microelectrodes and nanoparticle labels. , 2006, Journal of the American Chemical Society.

[12]  K. Cammann,et al.  Disposable ion-selective electrodes , 1995 .

[13]  Ernö Pretsch,et al.  Aptamer-based potentiometric measurements of proteins using ion-selective microelectrodes. , 2008, Analytical chemistry.

[14]  J. Riu,et al.  Nanostructured materials in potentiometry , 2011, Analytical and bioanalytical chemistry.

[15]  G. Whitesides,et al.  Simple telemedicine for developing regions: camera phones and paper-based microfluidic devices for real-time, off-site diagnosis. , 2008, Analytical chemistry.

[16]  Ernö Pretsch,et al.  Elimination of undesirable water layers in solid-contact polymeric ion-selective electrodes. , 2008, Analytical chemistry.

[17]  A. Michalska,et al.  All-Solid-State Potentiometric Sensors for Potassium and Sodium Based on Poly(pyrrole) Solid Contact , 1997 .

[18]  Yu Qin,et al.  Single-piece solid-contact ion-selective electrodes with polymer–carbon nanotube composites , 2010 .

[19]  F. Rius,et al.  Paper-based ion-selective potentiometric sensors. , 2012, Analytical chemistry.

[20]  Eric Bakker,et al.  Solid-contact potentiometric polymer membrane microelectrodes for the detection of silver ions at the femtomole level. , 2007, Sensors and actuators. B, Chemical.

[21]  Yi Cui,et al.  Stretchable, porous, and conductive energy textiles. , 2010, Nano letters.

[22]  A. Stein,et al.  Ion-selective electrodes with three-dimensionally ordered macroporous carbon as the solid contact. , 2007, Analytical chemistry.

[23]  E. Bakker.  Determination of Unbiased Selectivity Coefficients of Neutral Carrier-Based Cation-Selective Electrodes , 1997 .

[24]  W. Dungchai,et al.  A low-cost, simple, and rapid fabrication method for paper-based microfluidics using wax screen-printing. , 2011, The Analyst.

[25]  A. Michalska,et al.  All-solid-state planar miniature ion-selective chloride electrode , 2002 .

[26]  Jianguo Huang,et al.  Fabrication of natural cellulose substance derived hierarchical polymeric materials , 2009 .

[27]  F. Rius,et al.  Transduction mechanism of carbon nanotubes in solid-contact ion-selective electrodes. , 2009, Analytical chemistry.

[28]  G. Whitesides,et al.  Diagnostics for the developing world: microfluidic paper-based analytical devices. , 2010, Analytical chemistry.

[29]  F. Rius,et al.  Ion-selective electrodes using carbon nanotubes as ion-to-electron transducers. , 2008, Analytical chemistry.

[30]  Johan Bobacka,et al.  Potentiometric Ion Sensors Based on Conducting Polymers , 2003 .

[31]  E. Hall,et al.  An experimental study of membrane materials and inner contacting layers for ion-selective K+ electrodes with a stable response and good dynamic range. , 2004, Analytical chemistry.

[32]  R. Cattrall,et al.  Some alkylphosphoric acid esters for use in coated-wire calcium-selective electrodes: Part I. Response characteristics , 1975 .

[33]  E. Jaworska,et al.  Simple and disposable potentiometric sensors based on graphene or multi-walled carbon nanotubes--carbon-plastic potentiometric sensors. , 2013, The Analyst.

[34]  J. Bobacka,et al.  Potential Stability of All-Solid-State Ion-Selective Electrodes Using Conducting Polymers as Ion-to-Electron Transducers. , 1999, Analytical chemistry.

[35]  Arben Merkoçi,et al.  Rapid and highly sensitive detection of mercury ions using a fluorescence-based paper test strip with an N-alkylaminopyrazole ligand as a receptor , 2012 .

[36]  E. Hall,et al.  Ion-transport and diffusion coefficients of non-plasticised methacrylic-acrylic ion-selective membranes. , 2004, Talanta.

[37]  Meinhard Knoll,et al.  Potentiometric test strip , 1995 .

[38]  J. Bobacka.  Conducting Polymer‐Based Solid‐State Ion‐Selective Electrodes , 2006 .

[39]  Eric Bakker,et al.  Solid contact potentiometric sensors for trace level measurements. , 2006, Analytical chemistry.

[40]  Róbert E. Gyurcsányi,et al.  Towards Protein Assays on Paper Platforms with Potentiometric Detection , 2012 .

[41]  P. Bühlmann,et al.  Selectivity of potentiometric ion sensors. , 2000, Analytical chemistry.

[42]  Yu Qin,et al.  Preparation of all solid-state potentiometric ion sensors with polymer-CNT composites , 2009 .