Recent advancements on the phase field approach to brittle fracture for heterogeneous materials and structures

Recent advancements on the variational approach to fracture for the prediction of complex crack patterns in heterogeneous materials and composite structures is herein proposed, as a result of the frontier research activities undertaken in the FP7 ERC Starting Grant project CA2PVM which focuses on the development of computational methods for the durability and the reliability assessment of photovoltaic laminates. From the methodological viewpoint, the phase field approach to describe the propagation of brittle fracture in the bulk has been coupled for the very first time with the cohesive zone model to depict interface crack growth events, for 2D isotropic and anisotropic constitutive laws, and also for 3D finite elasticity. After a summary of the key aspects underlying the theoretical formulation and the finite element implementation using a monolithic fully implicit solution scheme, an overview of the main technological applications involving layered shells, interface mechanical problems and polycrystalline materials is provided. The examples are selected to show the capability of the proposed approach to investigate complex phenomena such as crack deflection vs. crack penetration at an interface, intergranular vs. transgranular crack growth in polycrystals, and interlayer vs. translayer failure in laminates.

[1]  Umberto Perego,et al.  Fracture energy based bi-dissipative damage model for concrete , 2001 .

[2]  John W. Hutchinson,et al.  Crack deflection at an interface between dissimilar elastic-materials , 1989 .

[3]  Klaus Hackl,et al.  A regularization framework for damage–plasticity models via gradient enhancement of the free energy , 2011 .

[4]  Xiaopeng Xu,et al.  Numerical simulations of fast crack growth in brittle solids , 1994 .

[5]  X. G. Tan,et al.  Optimal solid shells for non-linear analyses of multilayer composites. II. Dynamics , 2003 .

[6]  Peter Wriggers,et al.  Stiffness and strength of hierarchical polycrystalline materials with imperfect interfaces , 2012 .

[7]  Claudia Comi,et al.  Computational modelling of gradient‐enhanced damage in quasi‐brittle materials , 1999 .

[8]  J. C. Simo,et al.  Geometrically non‐linear enhanced strain mixed methods and the method of incompatible modes , 1992 .

[9]  Cv Clemens Verhoosel,et al.  Gradient damage vs phase-field approaches for fracture: Similarities and differences , 2016 .

[10]  Timon Rabczuk,et al.  Phase-field analysis of finite-strain plates and shells including element subdivision , 2016 .

[11]  Christian Miehe,et al.  A theoretical and computational model for isotropic elastoplastic stress analysis in shells at large strains , 1998 .

[12]  T. Belytschko,et al.  The extended/generalized finite element method: An overview of the method and its applications , 2010 .

[13]  Gianni Royer-Carfagni,et al.  Regularized variational theories of fracture: A unified approach , 2010 .

[14]  Michael M. Khonsari,et al.  A variational approach to the fracture of brittle thin films subject to out-of-plane loading , 2013 .

[15]  B. Bourdin,et al.  The Variational Approach to Fracture , 2008 .

[16]  L. Ambrosio,et al.  Approximation of functional depending on jumps by elliptic functional via t-convergence , 1990 .

[17]  Marco Paggi,et al.  Strength prediction of notched thin ply laminates using finite fracture mechanics and the phase field approach , 2017 .

[18]  L. Lorenzis,et al.  Phase-field modeling of brittle and ductile fracture in shells with isogeometric NURBS-based solid-shell elements , 2016 .

[19]  Marco Paggi,et al.  Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation , 2017, Computational Mechanics.

[20]  V. Mantič,et al.  Fiber-size effects on the onset of fiber–matrix debonding under transverse tension: A comparison between cohesive zone and finite fracture mechanics models , 2014 .

[21]  P. Camanho,et al.  Notched response of non-crimp fabric thin-ply laminates , 2013 .

[22]  V. Mantič,et al.  A micromechanical view of inter-fibre failure of composite materials under compression transverse to the fibres , 2008 .

[23]  R. Rolfes,et al.  A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatings , 2016 .

[24]  J. Cognard.  The Mechanics of the Wedge Test , 1986 .

[25]  M. Paggi,et al.  Fatigue degradation and electric recovery in Silicon solar cells embedded in photovoltaic modules , 2014, Scientific Reports.

[26]  Matthias Ebert,et al.  Systematic investigation of cracks in encapsulated solar cells after mechanical loading , 2013 .

[27]  Francisco Armero,et al.  Finite elements with embedded strong discontinuities for the modeling of failure in solids , 2007 .

[28]  Christian Miehe,et al.  Thermodynamically consistent phase‐field models of fracture: Variational principles and multi‐field FE implementations , 2010 .

[29]  Christian Miehe,et al.  A phase field model for rate-independent crack propagation: Robust algorithmic implementation based on operator splits , 2010 .

[30]  V. Mantič,et al.  Mixed-mode failure of interfaces studied by the 2D linear elastic–brittle interface model: Macro- and micro-mechanical finite-element applications in composites , 2018 .

[31]  Marco Paggi,et al.  Revisiting the problem of a crack impinging on an interface: A modeling framework for the interaction between the phase field approach for brittle fracture and the interface cohesive zone model , 2017, 1702.01102.

[32]  Ted Belytschko,et al.  A finite element method for crack growth without remeshing , 1999 .

[33]  Marco Paggi,et al.  A finite element framework for the interplay between delamination and buckling of rubber-like bi-material systems and stretchable electronics , 2016 .

[34]  E. Ramm,et al.  Shear deformable shell elements for large strains and rotations , 1997 .

[35]  Christian Miehe,et al.  Phase Field Modeling of Fracture in Plates and Shells , 2012 .

[36]  Günther Meschke,et al.  Variational approach to interface element modeling of brittle fracture propagation , 2018 .

[37]  Z. Bažant,et al.  Nonlocal Continuum Damage, Localization Instability and Convergence , 1988 .

[38]  G. D. Maso,et al.  An Introduction to-convergence , 1993 .

[39]  B. Bourdin,et al.  A variational model for fracture and debonding of thin films under in-plane loadings , 2014 .

[40]  J. Degrieck,et al.  Optimal low-order fully integrated solid-shell elements , 2013 .

[41]  Pedro P. Camanho,et al.  Micro-mechanical analysis of the in situ effect in polymer composite laminates , 2014 .

[42]  Gianni Dal Maso,et al.  An Introduction to [gamma]-convergence , 1993 .

[43]  Marco Paggi,et al.  Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field–cohesive zone model approach , 2018 .

[44]  Marco Paggi,et al.  A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model , 2017 .

[45]  Sven Klinkel,et al.  A geometrical non‐linear brick element based on the EAS‐method , 1997 .

[46]  J. Molinari,et al.  Effects of residual stresses on the tensile fatigue behavior of concrete , 2016 .

[47]  Marco Paggi,et al.  A global/local approach for the prediction of the electric response of cracked solar cells in photovoltaic modules under the action of mechanical loads , 2016 .

[48]  M. Frémond,et al.  Damage, gradient of damage and principle of virtual power , 1996 .

[49]  Dusan Krajcinovic,et al.  Damage model for brittle elastic solids with unequal tensile and compressive strengths , 1994 .

[50]  Fatemeh Amiri,et al.  Phase-field modeling of fracture in linear thin shells , 2014 .

[51]  Sven Klinkel,et al.  A continuum based three-dimensional shell element for laminated structures , 1999 .

[52]  B. Bourdin,et al.  Numerical experiments in revisited brittle fracture , 2000 .

[53]  J. Parmigiani,et al.  The roles of toughness and cohesive strength on crack deflection at interfaces , 2006 .

[54]  Alessandro Reali,et al.  Phase-field description of brittle fracture in plates and shells , 2016 .

[55]  Marco Paggi,et al.  A multi-physics and multi-scale numerical approach to microcracking and power-loss in photovoltaic modules , 2013, 1303.7452.

[56]  Cv Clemens Verhoosel,et al.  A phase‐field model for cohesive fracture , 2013 .

[57]  J. G. Williams,et al.  Analytical solutions for cohesive zone models , 2002 .