Relation of the strength distribution of Nb3Sn to the critical current of a pre-stressed multifilamentary composite superconductor

From an analysis of the change in the superconducting critical current at 4.2 K caused by pre-stressing treatment at room temperature, the distribution of tensile strength of Nb3Sn in multifilamentary bronze-processed composite wires heat-treated at 973 K for 8.6 (sample A), 43 (B) and 260 ks (C) is estimated using the two-parameter Weibull distribution function. The shape parameters of the Weibull distribution are 7.2, 12 and 14, and the average strengths of the Nb3Sn are 1.3, 1.0 and 0.79 GPa for samples A, B and C respectively for the present specimen length of 25 mm. This means that the scatter of strengths and also the average strength for specimens of length 25 mm decrease with increasing heat-treatment time. An attempt to predict the length dependence of the critical current of pre-stressed specimens from the data for short specimens is presented. It seems that the permissible pre-stress below which there is no breakage of Nb3Sn (for all Nb3Sn transport currents) is reduced by 20-30% when the specimen is lengthened from 25 mm to 300 m, while the average strength of Nb3Sn is reduced by 50-70%.

[1]  S. Ochiai,et al.  Estimation of strength distribution of Nb3Sn in multifilamentary composite wire from change in superconducting current due to preloading , 1993 .

[2]  S. Ochiai,et al.  Influence of cyclic loading at room temperature on the critical current at 4.2 K of Nb3Sn superconducting composite wire , 1992 .

[3]  K. Osamura,et al.  Strength and critical current density of Bi(Pb)SrCaCuO and YBaCuO in silver-sheathed superconducting tapes , 1992 .

[4]  K. Osamura,et al.  Comparison of mechanical and superconducting properties of titanium-added Nb3Sn composite wire with those of non-added ones , 1991 .

[5]  K. Osamura,et al.  Tensile strength and its scatter of superconducting Ba2YCu3O7−x in silver-sheathed wire and tape estimated from multiple-cracking phenomenon , 1991 .

[6]  S. Ochiai,et al.  Prediction of variation of upper critical magnetic field of Nb3Sn superconducting composites as a function of applied stress at room temperature , 1989 .

[7]  S. Ochiai,et al.  Influence of loading-unloading treatment at room temperature on critical current of bronze-processed Nb3Sn superconducting composites , 1988 .

[8]  K. Osamura,et al.  Strength and elongation of multifilamentary Nb3Sn superconducting composite materials with small amounts of Nb3Sn compound , 1987 .

[9]  S. Ochiai,et al.  Room-temperature tensile behaviour of bronze-processed multi-filamentary Nb3Sn superconducting materials , 1986 .

[10]  J. Ekin,et al.  Strain scaling law for flux pinning in practical superconductors. Part 1: Basic relationship and application to Nb3Sn conductors , 1980 .

[11]  B. B. Schwartz,et al.  Mechanical properties of in situ multifilamentary Nb3Sn superconducting wires , 1979 .

[12]  J. Ekin.  Strain dependence of the critical current and critical field in multifilamentary Nb 3 Sn composites , 1979 .

[13]  M. Suenaga,et al.  The influence of thermally induced matrix stresses on the superconducting properties of Nb 3 Sn wire conductors , 1977 .

[14]  D. Larbalestier,et al.  The influence of tensile stress on the critical current of filamentary Nb 3 Sn magnet conductor , 1977 .

[15]  Edward J. Kramer,et al.  Scaling laws for flux pinning in hard superconductors , 1973 .