Cold-formed high strength stainless steel cross-sections in compression considering interaction effects of constituent plate elements

Abstract This paper presents a numerical investigation of cold-formed high strength stainless steel square and rectangular hollow sections in compression. A non-linear finite element model which includes geometric and material non-linearities was developed and verified against experimental results. The model was then used for an extensive parametric study to investigate the interaction effects of constituent plate elements on Class 3 slenderness limit and section capacities of cold-formed high strength stainless steel square and rectangular hollow sections in compression. The numerical investigation shows that the interaction effects of constituent plate elements on cross-section response are quite obvious particularly for slender sections. The design provisions on Class 3 slenderness limit and effective width equations specified in the EC3 Code and proposed by Gardner and Theofanous are suitable for square hollow sections, but not for rectangular hollow sections since they do not take into consideration of interaction effects of constituent plate element. Hence, the new Class 3 slenderness limit and the section capacity design equations based on the whole cross-section response are proposed in this study, which carefully consider the interaction effects of constituent plate elements.

[1]  Ben Young,et al.  Compression tests of stainless steel tubular members , 2002 .

[2]  null null,et al.  Specification for the Design of Cold-Formed Stainless Steel Structural Members , 2002 .

[3]  Ehab Ellobody,et al.  Structural performance of cold-formed high strength stainless steel columns , 2005 .

[4]  Ben Young,et al.  Behavior of Cold-Formed High Strength Stainless Steel Sections , 2005 .

[5]  Benjamin W. Schafer,et al.  Local buckling of structural steel shapes , 2010 .

[6]  Kim J.R. Rasmussen,et al.  Design of Cold-Formed Stainless Steel Tubular Members. II: Beams , 1993 .

[7]  Leroy Gardner,et al.  Testing and numerical modelling of lean duplex stainless steel hollow section columns , 2009 .

[8]  David A. Nethercot,et al.  Numerical Modeling of Stainless Steel Structural Components—A Consistent Approach , 2004 .

[9]  David A. Nethercot,et al.  Experiments on stainless steel hollow sections—Part 2: Member behaviour of columns and beams , 2004 .

[10]  Leroy Gardner,et al.  Discrete and continuous treatment of local buckling in stainless steel elements , 2008 .

[11]  Ben Kato,et al.  Rotation capacity of H-section members as determined by local buckling , 1989 .

[12]  Benjamin W. Schafer,et al.  REVIEW: THE DIRECT STRENGTH METHOD OF COLD-FORMED STEEL MEMBER DESIGN , 2008 .

[13]  Darko Beg,et al.  Slenderness limit of Class 3 I cross-sections made of high strength steel , 1996 .

[14]  Leroy Gardner,et al.  Experimental and numerical studies of lean duplex stainless steel beams , 2010 .

[15]  Leroy Gardner,et al.  A new approach to structural stainless steel design , 2002 .

[16]  Ben Young,et al.  Experimental investigation of cold-formed stainless steel columns , 2002 .

[17]  Alastair C. Walker,et al.  Post-Buckling of Geometrically Imperfect Plates , 1972 .