A steady-state implementation of the IWA Anaerobic Digestion Model No. 1 (ADM1) has been applied to the anaerobic digesters in two wastewater treatment plants. The two plants have a wastewater treatment capacity of 76,000 and 820,000 m3/day, respectively, with approximately 12 and 205 dry metric tons sludge fed to digesters per day. The main purpose of this study is to compare the ADM1 model results with full-scale anaerobic digestion performance. For both plants, the prediction of the steady-state ADM1 implementation using the suggested physico-chemical and biochemical parameter values was able to reflect the results from the actual digester operations to a reasonable degree of accuracy on all parameters. The predicted total solids (TS) and volatile solids (VS) concentration in the digested biosolids, as well as the digester volatile solids destruction (VSD), biogas production and biogas yield are within 10% of the actual digester data. This study demonstrated that the ADM1 is a powerful tool for predicting the steady-state behaviour of anaerobic digesters treating sewage sludges. In addition, it showed that the use of a whole wastewater treatment plant simulator for fractionating the digester influent into the ADM1 input parameters was successful.
[1]
Mogens Henze,et al.
Activated Sludge Model No.2d, ASM2D
,
1999
.
[2]
Glen T. Daigger,et al.
INTEGRATING ASM 2d MODELS INTO WHOLE PLANT MASS BALANCE SIMULATORS
,
2001
.
[3]
W. Gujer,et al.
Activated sludge model No. 3
,
1995
.
[4]
Irini Angelidaki,et al.
Anaerobic digestion model No. 1 (ADM1)
,
2002
.
[5]
Z. Erdal,et al.
Identifying and Controlling Odor in the Municipal Wastewater Environment Phase II
,
2004
.