Stochastic model predictive control for remanufacturing system management

Abstract Uncertainties in the quality, quantity, and operational time of used products pose a challenge to the management of remanufacturing systems. In addition, it becomes a necessity to optimize the operation of the remanufacturing system to balance the quality of products, remanufacturing efficiency, and service level. In this study, a stochastic discrete-time dynamical model is proposed to represent a remanufacturing system, where the relationship between the market satisfaction, inventory status, and operational actions is explicitly modeled. This includes production and inventory planning, resource allocation and acquisition. To handle uncertainties, a stochastic model predictive control approach is proposed to plan the actions that optimize the remanufacturing efficiency. Our results in the simulation examples show that: (a) without supplies, the remanufacturing system has better stability and robustness than a conventional manufacturing system with the same initial stocks; and (b) with insufficient initial stocks, the remanufacturing system demands fewer and more gradual supplies, thereby keeping the system stable. Finally, a sensitivity analysis is conducted for testing the performance of the remanufacturing system. By changing the operational action capacity, different state equilibria are discovered, which correspond to distinct system response characteristics. The study reveals notable managerial insights and effects of product commonality, demand patterns, and operational actions scheduling on the efficiency of the remanufacturing system.

[1]  Mohamed Mohamed Naim,et al.  Dynamic analysis of a WIP compensated decision support system , 1994 .

[2]  Kannan Govindan,et al.  Assessment of consumers' motivations to purchase a remanufactured product by applying Fuzzy Delphi method and single valued neutrosophic sets , 2018, Journal of Cleaner Production.

[3]  Alireza Fazlirad,et al.  Application of Model Predictive Control to Control Transient Behavior in Stochastic Manufacturing System Models , 2016 .

[4]  Marko Bacic,et al.  Model predictive control , 2003 .

[5]  L. B. Toktay,et al.  Joint Life‐Cycle Dynamics of New and Remanufactured Products , 2006 .

[6]  Ruud H. Teunter,et al.  Optimal core acquisition and remanufacturing policies under uncertain core quality fractions , 2011, Eur. J. Oper. Res..

[7]  Sean X. Zhou,et al.  Technical Note - Optimal Product Acquisition, Pricing, and Inventory Management for Systems with Remanufacturing , 2011, Oper. Res..

[8]  Meisheng Xue,et al.  Stochastic MPC for supply chain management using MCMC approaches , 2010, 2010 Chinese Control and Decision Conference.

[9]  Bart De Schutter,et al.  Multi-agent model predictive control for transportation networks: Serial versus parallel schemes , 2008, Eng. Appl. Artif. Intell..

[10]  Sergio Rubio,et al.  Key drivers in the behavior of potential consumers of remanufactured products: a study on laptops in Spain , 2014 .

[11]  David Q. Mayne,et al.  Model predictive control: Recent developments and future promise , 2014, Autom..

[12]  William B. Dunbar,et al.  Distributed MPC for Dynamic Supply Chain Management , 2007 .

[13]  Shi Peijing.  Prospects and Developing of Remanufacture Forming Technology , 2012 .

[14]  David Q. Mayne,et al.  Robust model predictive control of constrained linear systems with bounded disturbances , 2005, Autom..

[15]  Hau L. Lee,et al.  Information distortion in a supply chain: the bullwhip effect , 1997 .

[16]  Vedat Verter,et al.  Coordination and Priority Decisions in Hybrid Manufacturing/Remanufacturing Systems , 2006 .

[17]  V. Guide,et al.  Production planning and control for remanufacturing: industry practice and research needs , 2000 .

[18]  Peter Kall,et al.  Stochastic Programming , 1995 .

[19]  Hongwei Liu,et al.  Discrete event-driven model predictive control for real-time work-in-process optimization in serial production systems , 2020 .

[20]  Ali Gharbi,et al.  Stochastic optimal control of random quality deteriorating hybrid manufacturing/remanufacturing systems , 2018, Journal of Manufacturing Systems.

[21]  H. Simon,et al.  On the Application of Servomechanism Theory in the Study of Production Control , 1952 .

[22]  Luk N. Van Wassenhove,et al.  Remanufacturing as a Marketing Strategy , 2008, Manag. Sci..

[23]  Sara Behdad,et al.  Optimal sorting policies in remanufacturing systems: Application of product life-cycle data in quality grading and end-of-use recovery , 2017 .

[24]  Jwm Will Bertrand,et al.  Balancing production level variations and inventory variations in complex production systems , 1986 .

[25]  Pratyush Banerjee,et al.  Drivers of consumer purchase intentions for remanufactured products , 2015 .

[26]  Donald J. Bowersox,et al.  Supply Chain Logistics Management , 2002 .

[27]  Dimitris Mourtzis,et al.  Development of methods and tools for the design and operation of manufacturing networks for mass customisation , 2016 .

[28]  İhsan Yanıkoğlu,et al.  The value of quality grading in remanufacturing under quality level uncertainty , 2020, Int. J. Prod. Res..

[29]  Bogdan I. Epureanu,et al.  AI-based competition of autonomous vehicle fleets with application to fleet modularity , 2020, Eur. J. Oper. Res..

[30]  Marco Pavone,et al.  Stochastic Model Predictive Control for Autonomous Mobility on Demand , 2018, 2018 21st International Conference on Intelligent Transportation Systems (ITSC).

[31]  K. Inderfurth.  Optimal policies in hybrid manufacturing/remanufacturing systems with product substitution , 2004 .

[32]  Stefano Di Cairano,et al.  Stochastic Model Predictive Control , 2018, Handbook of Model Predictive Control.

[33]  Christoph A. Schneeweiss,et al.  Dynamic certainty equivalents in production smoothing theory , 1975 .

[34]  Bogdan I. Epureanu,et al.  Robustness and adaptability analysis of future military modular fleet operation system , 2017 .

[35]  Jun Ni,et al.  Optimal control of reassembly with variable quality returns in a product remanufacturing system , 2011 .

[36]  Basil Kouvaritakis,et al.  Probabilistic Constrained MPC for Multiplicative and Additive Stochastic Uncertainty , 2009, IEEE Transactions on Automatic Control.

[37]  Dongpu Cao,et al.  Switching-Based Stochastic Model Predictive Control Approach for Modeling Driver Steering Skill , 2015, IEEE Transactions on Intelligent Transportation Systems.

[38]  Kouedeu Annie Francie,et al.  Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry , 2015 .

[39]  Alberto Bemporad,et al.  Stochastic MPC With Learning for Driver-Predictive Vehicle Control and its Application to HEV Energy Management , 2014, IEEE Transactions on Control Systems Technology.

[40]  G Ripaccioli,et al.  A stochastic model predictive control approach for series hybrid electric vehicle power management , 2010, Proceedings of the 2010 American Control Conference.

[41]  Bogdan I. Epureanu,et al.  An Agent-Based Approach for Optimizing Modular Vehicle Fleet Operation , 2018, International Journal of Production Economics.

[42]  Lang Xu,et al.  Sustainable manufacturing in a closed-loop supply chain considering emission reduction and remanufacturing , 2017 .

[43]  Ali Gharbi,et al.  Production and setup control policy for unreliable hybrid manufacturing-remanufacturing systems , 2019, Journal of Manufacturing Systems.

[44]  Binshi Xu.  Prospects and Developing of Remanufacture Forming Technology , 2012 .

[45]  Herbert J. Vassian.  Application of Discrete Variable Servo Theory to Inventory Control , 1955, Oper. Res..

[46]  János Abonyi,et al.  Fuzzy activity time-based model predictive control of open-station assembly lines , 2020 .