Environmental evaluation of biomass pelleting using life cycle assessment

Abstract The exploitation of biomass for energy production purposes can significantly reduce the environmental burdens associated with the highly criticized fossil fuelled energy production. Life cycle assessment (LCA) methodology has proven to be one of the most effective tools for carrying out environmental impact analysis of any process or system. The interpretation of the findings of LCA can be used as a basis for recommendations and decision making in accordance to the goal and scope definition. The aim of this paper is to conduct a comprehensive LCA for the environmental evaluation of the biomass pelleting process with the focus being on the transportation and manufacturing stages. To achieve this aim, four scenarios are presented, investigating the pelleting process of olive husk, an abundant waste biomass found in Cyprus. Two alternative scenarios are developed in an effort to compare the centralised and the decentralised management of olive husk. Regarding those two scenarios, a novel mathematical parametric model was developed and Non-Linear Programming was applied for the computation of the optimal locations for a set of management facilities which achieve the lowest energy needs for transportation purposes. Additionally, a third and fourth scenario aimed to the comparison of the potential improvement of the environmental footprint of the olive husk pellets with regard to their reference cases (Scenario 1 and 2 respectively), when Renewable Energy Sources (RES) are incorporated in the pelleting process system. The authors concluded that the selection of location for the biomass management centres, as well as the employment of renewable energy technologies (RET) for energy generation can significantly affect the environmental impact of biomass utilisation. The environmental impact of olive husk pellet production was improved by more than 85% in selected impact categories when RES were incorporated in the manufacturing stage. The comparison of centralised and decentralised scenarios for olive husk management has indicated the latter to be the most environment-friendly solution.

[1]  Andreas Poullikkas,et al.  The cost of integration of parabolic trough CSP plants in isolated Mediterranean power systems , 2010 .

[2]  J. Repke,et al.  Effect of miscanthus addition and different grinding processes on the quality of wood pellets. , 2012 .

[3]  Arnaldo Walter,et al.  Global Wood Pellets Markets and Industry: Policy Drivers, Market Status and Raw Material Potential , 2007 .

[4]  Anastasia Zabaniotou,et al.  Review of sustainable biomass pellets production – A study for agricultural residues pellets’ market in Greece , 2012 .

[5]  Per-Anders Hansson,et al.  Time-dependent climate impact of heat production from Swedish willow and poplar pellets – In a life cycle perspective , 2014 .

[6]  Hong Wang,et al.  Biomass resources and their bioenergy potential estimation: A review , 2013 .

[7]  Adrian Pirraglia,et al.  Techno-economical analysis of wood pellets production for U.S. manufacturers , 2010, BioResources.

[8]  Shahab Sokhansanj,et al.  Evaluation of wood pellet application for residential heating in British Columbia based on a streamlined life cycle analysis. , 2013 .

[9]  Timo Korpela,et al.  Net environmental impacts of low-share wood pellet co-combustion in an existing coal-fired CHP (combined heat and power) production in Helsinki, Finland , 2014 .

[10]  Enrico Benetto,et al.  Life cycle assessment of heat production from grape marc pellets , 2015 .

[11]  Ulrich J. Wolfsmayr,et al.  The primary forest fuel supply chain: a literature review. , 2014 .

[12]  Paris A. Fokaides,et al.  Multicriteria analysis for the selection of the most appropriate energy crops: the case of Cyprus , 2016 .

[13]  E. Gnansounou,et al.  GIS-based approach for defining bioenergy facilities location: A case study in Northern Spain based on marginal delivery costs and resources competition between facilities , 2008 .

[14]  Montserrat Zamorano,et al.  Factors affecting the quality of pellets made from residual biomass of olive trees , 2015 .

[15]  L. Tabil,et al.  Experimental trials to make wheat straw pellets with wood residue and binders. , 2014 .

[16]  D. Choi,et al.  Effects of densification variables on the durability of wood pellets fabricated with Larix kaempferi C. and Liriodendron tulipifera L. sawdust , 2013 .

[17]  M. P. Levi,et al.  Effect of species and wood to bark ratio on pelleting of southern woods , 1984 .

[18]  Viktor Popov,et al.  A comparative study of quality properties of pelletized agricultural and forestry lopping residues , 2011 .

[19]  J. Barney,et al.  Yield potential and stand establishment for 20 candidate bioenergy feedstocks. , 2015 .

[20]  Francesco Cherubini,et al.  Crop residues as raw materials for biorefinery systems - A LCA case study , 2010 .

[21]  Shahab Sokhansanj,et al.  A life cycle evaluation of wood pellet gasification for district heating in British Columbia. , 2011, Bioresource technology.

[22]  M. Giugliano,et al.  LCA of domestic and centralized biomass combustion: The case of Lombardy (Italy). , 2010 .

[23]  Xia Li,et al.  Using spatial information technologies to select sites for biomass power plants : A case study in Guangdong Province, China , 2008 .

[24]  Paris A. Fokaides,et al.  A Review of Quantification Practices for Plant-Derived Biomass Potential , 2015 .

[25]  Marcelle C. McManus,et al.  Comparative cradle-to-gate life cycle assessment of wood pellet production with torrefaction , 2015 .

[26]  Caren C. Dymond,et al.  Fibre use, net calorific value, and consumption of forest-derived bioenergy in British Columbia, Canada , 2014 .

[27]  P. Fokaides,et al.  Monte Carlo parametric modeling for predicting biomass calorific value , 2014, Journal of Thermal Analysis and Calorimetry.

[28]  Ali El Hanandeh,et al.  Energy recovery alternatives for the sustainable management of olive oil industry waste in Australia: life cycle assessment , 2015 .

[29]  Sergio Nogales,et al.  Characterization and combustion of olive pomace and forest residue pellets , 2012 .

[30]  F. Fantozzi,et al.  Life cycle assessment of biomass chains: Wood pellet from short rotation coppice using data measured on a real plant , 2010 .

[31]  D. Choi,et al.  Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust , 2014 .

[32]  S. Mekhilef,et al.  A review on biomass as a fuel for boilers , 2011 .

[33]  Ali El Hanandeh,et al.  Carbon abatement via treating the solid waste from the Australian olive industry in mobile pyrolysis units: LCA with uncertainty analysis. , 2013 .

[34]  Gijsbert Korevaar,et al.  Life cycle assessment of direct co-firing of torrefied and/or pelletised woody biomass with coal in The Netherlands , 2014 .

[35]  Staffan Melin,et al.  An environmental impact assessment of exported wood pellets from Canada to Europe. , 2009 .

[36]  M. Jeguirim,et al.  Physico-chemical properties and thermal degradation characteristics of agropellets from olive mill by-products/sawdust blends , 2014 .

[37]  Salvatore Faugno,et al.  Bioenergy potential of agricultural and forest residues in Uganda , 2013 .

[38]  N. Voća,et al.  Chemometric approach for assessing the quality of olive cake pellets , 2013 .

[39]  Milan Martinov,et al.  Location allocation of solid biomass power plants: Case study of Vojvodina , 2013 .

[40]  John F. Wood,et al.  The Functional Properties of Feed Raw Materials and their Effect on the Production and Quality of Feed Pellets , 1987 .

[41]  T. Ranta.  Logging residues from regeneration fellings for biofuel production - a GIS-based availability analysis in Finland. , 2005 .