Experimental determination of the fracture properties of unfired dry earth

Abstract The fracture behaviour of unfired dry earth has been investigated by means of an experimental approach supported by some numerical simulations. Three-points bending tests, both with monotonic and cyclic loads, have been performed experimentally, and the related force–displacement diagrams are interpreted theoretically to characterize the fracture parameters of the considered material. Both Linear Elastic Fracture Mechanics and a Two Parameter Model are considered. In the latter case, based on the post-peak softening behaviour, the R-curve is determined, which shows how the critical stress intensity factor depends on the fracture length.

[1]  Surendra P. Shah,et al.  Two Parameter Fracture Model for Concrete , 1985 .

[2]  Ka Heathcote,et al.  Compressive strength of cement stabilized pressed earth blocks , 1991 .

[3]  Hugo Houben,et al.  Earth Construction: A Comprehensive Guide , 1994 .

[4]  A. Hakimi,et al.  Rapport: Résultats d'essais de résistance mécanique sur échantillon de terre comprimée , 1996 .

[5]  M. Carmen Jiménez Delgado,et al.  Earth building in Spain , 2006 .

[6]  Peter Walker,et al.  Building houses with local materials: means to drastically reduce the environmental impact of construction , 2001 .

[7]  Özlem Çavdar,et al.  The effects of the fiber contents on the mechanic properties of the adobes , 2008 .

[8]  Jean-Claude Morel,et al.  A model to measure compressive strength of compressed earth blocks with the ‘3 points bending test’ , 2002 .

[9]  Peter Walker,et al.  Compressive strength testing of compressed earth blocks , 2007 .

[10]  Túlio Nogueira Bittencourt,et al.  R-curve behavior in notched beam tests of rocks , 2002 .

[11]  António J.M. Ferreira,et al.  Fracture behavior of glass fiber reinforced polymer concrete , 2003 .

[12]  S. Kenai,et al.  Performance of composite soil reinforced with barley straw , 2005 .

[13]  H. Binici,et al.  Investigation of fibre reinforced mud brick as a building material , 2005 .

[14]  David Lilley,et al.  ULTIMATE STRENGTH OF RAMMED EARTH WALLS WITH OPENINGS. , 1995 .

[15]  Enrico Quagliarini,et al.  The influence of natural stabilizers and natural fibres on the mechanical properties of ancient Roman adobe bricks , 2010 .

[16]  G. S. Austin,et al.  Adobe mineralogy: characterization of adobes from around the world , 1990 .

[17]  M. Elices,et al.  Fracture mechanics parameters of concrete , 1996 .

[18]  M. Elices,et al.  Fracture mechanics parameters of concrete: An overview , 1996 .

[19]  Jun-jie Wang,et al.  Experimental study on fracture toughness and tensile strength of a clay , 2007 .

[20]  M. N. Bodur,et al.  Thermal isolation and mechanical properties of fibre reinforced mud bricks as wall materials , 2007 .

[21]  G. Schneider,et al.  Estimation of R-curve in WC/Co cermet by CT test , 2008 .

[22]  S. Lenci,et al.  Mechanical properties of adobe walls in a Roman Republican domus at Suasa , 2010 .

[24]  Peter Walker.  Characteristics of pressed earth block in compression , 1997 .