Application of thermo-hydro-chemo-mechanical model for early age behaviour of concrete to experimental massive reinforced structures with strain–restraining system

This paper presents the application of a thermo-hydro-chemo-mechanical (THCM) model to the design of actual massive structures with a system to restrain the strain at early age (thermal strains and autogenous shrinkage). The experimental campaign was performed in the French national project CEOS.fr. The modelling of early-age behaviour of reinforced concrete is first based on a hydration model, which is able to reproduce the variations of temperature, water content and mechanical properties according to hydration. Then a non-linear mechanical model is used (combining creep and damage models, both adapted to hardening concrete). The comparison between numerical results (obtained with a calculation time of around 12 h on an ordinary computer) shows that the models are able to reproduce the early-age behaviour of restrained reinforcement concrete structures (in terms of strains, global forces and crack patterns). Using steel-concrete interface elements (adapted to early age), the models are also able to reproduce the influence of reinforcement on cracking.

[1]  Rui Faria,et al.  Modelling of concrete at early ages: Application to an externally restrained slab , 2006 .

[2]  Luc Taerwe,et al.  Degree of hydration-based description of mechanical properties of early age concrete , 1996 .

[3]  Batian Kolani,et al.  Comportement au jeune âge des structures en béton armé à base de liants composés aux laitiers , 2012 .

[4]  Roman Lackner,et al.  Chemoplastic material model for the simulation of early-age cracking: From the constitutive law to numerical analyses of massive concrete structures , 2004 .

[5]  Alain Sellier,et al.  Orthotropic damage coupled with localized crack reclosure processing: Part II: Applications , 2013 .

[6]  Alain Sellier,et al.  Vers une modélisation simple et unifiée du fluage propre, du retrait et du fluage en dessiccation du béton , 2009 .

[7]  Alain Sellier,et al.  Hydration of slag-blended cements , 2012 .

[8]  H. Gurney.  Heat Transmission , 1909, Nature.

[9]  Alain Sellier,et al.  Multiphasic Finite Element Modeling of Concrete Hydration , 2007 .

[10]  Rui Faria,et al.  Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures , 2011 .

[11]  Farid Benboudjema,et al.  Early-age behaviour of concrete nuclear containments , 2008 .

[12]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[13]  A. Sellier,et al.  Effect of a temperature change from 20 to 50°C on the basic creep of HPC and HPFRC , 2011 .

[14]  Alain Sellier,et al.  Finite element modelling of hardening concrete: application to the prediction of early age cracking for massive reinforced structures , 2011 .

[15]  G. De Schutter.  Fundamental study of early age concrete behaviour as a basis for durable concrete structures , 2002 .

[16]  Rui Faria,et al.  Identification of early-age concrete temperatures and strains : monitoring and numerical simulation , 2009 .

[17]  Gabriele Bertagnoli,et al.  Early age cracking of massive concrete piers , 2011 .

[18]  Alain Sellier,et al.  Orthotropic damage coupled with localized crack reclosure processing. Part I: Constitutive laws , 2013 .

[19]  Alain Sellier,et al.  Chemo-Mechanical Modeling Requirements for the Assessment of Concrete Structure Service Life , 2011 .