3D-Printed 3 dB Hybrid Coupler for D-Band Applications

In this work, an additively manufactured 3 dB hybrid coupler for the D-Band frequency range is presented. The plastic body is printed from UV-curable polymer resin with a conventional desktop DLP printer and subsequently functionalized by an electroless silver plating process. The slotted waveguide approach is used, in order to improve the metal coating and enable the implementation of complex waveguide structures. Measured isolation and matching range at -15 dB while the asymmetry in magnitude between coupling and through port remains below 0.8 dB over the frequency range from 115 to 154 GHz, yielding an operational relative bandwidth of almost 28 % and hence, suggesting general feasibility for directional coupling applications. Measured phase differences deviate from the desired 90° by 40° to 50° which is related to the overall tolerances with respect to absolute geometrical dimensions of conventional desktop DLP printers and required post processing.

[1]  K. Lomakin,et al.  3D Printed E-Band Hybrid Coupler , 2019, IEEE Microwave and Wireless Components Letters.

[2]  M. Vossiek,et al.  SLA-Printed 3-D Waveguide Paths for E-Band Using Electroless Silver Plating , 2019, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[3]  M. Vossiek,et al.  3D Printed Slotted Rectangular Hollow Waveguides , 2019, 2019 IEEE MTT-S International Microwave Symposium (IMS).

[4]  Klaus Helmreich,et al.  A Physical Surface Roughness Model and Its Applications , 2017, IEEE Transactions on Microwave Theory and Techniques.

[5]  David S. Ricketts,et al.  A simple electroless plating solution for 3D printed microwave components , 2016, 2016 Asia-Pacific Microwave Conference (APMC).

[6]  Emilia Moldovan,et al.  Design and characterization of novel W-band wide-band couplers and six-port circuit , 2015, 2015 European Microwave Conference (EuMC).

[7]  Nick M. Ridler,et al.  3-D Printed Metal-Pipe Rectangular Waveguides , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[8]  J. Ward,et al.  Machining of terahertz split-block waveguides with micrometer precision , 2008, 2008 33rd International Conference on Infrared, Millimeter and Terahertz Waves.

[9]  H. Uchimura,et al.  Development of the "laminated waveguide" , 1998, 1998 IEEE MTT-S International Microwave Symposium Digest (Cat. No.98CH36192).