Prediction and analytical description of the single laser track geometry in direct laser fabrication from process parameters and energy balance reasoning

Abstract Direct laser fabrication (DLF) is a process for the manufacture of functional parts directly from powder injected in a laser beam. Deposition of 316L stainless steel powder on a steel substrate is carried out using a 700 W fiber laser for one module. One problem for this process is the control of the building structure dimensions. In this study a mathematical model implemented in the software Mathematica 8© is used to predict the clad cross-section dimensions and obtain an analytical description of the clad geometry. We experimentally notice that the cross-section shape is a disk due to the surface tension forces. Analytical relationships are established between the radius and the center of the disk in one hand and the process parameters in the other hand. This way we show that we can reproduce the laser track geometry in all the area experimentally explored. A number of laser tracks are deposited using a varying process parameter combination in order to compare with our calculation results. This analytical description of the clad geometry could be used in order to improve the calculation quickness of the thermal field induced by the process.

[1]  I. Manna,et al.  Laser processing of materials , 2003 .

[2]  Geoff Dearden,et al.  Optimum deposition parameters for the direct laser fabrication (DLF) of quasi-hollow structures , 2006 .

[3]  W. Kaplan,et al.  Calculation of process parameters for laser alloying and cladding , 1998 .

[4]  Knut Partes,et al.  Analytical model of the catchment efficiency in high speed laser cladding , 2009 .

[5]  T. Maiman.  Stimulated Optical Radiation in Ruby , 1960, Nature.

[6]  Y. Shin,et al.  Modeling of coaxial powder flow for the laser direct deposition process , 2009 .

[7]  Jichang Liu,et al.  Study on cross-section clad profile in coaxial single-pass cladding with a low-power laser , 2005 .

[8]  Jehnming Lin,et al.  Clad profiles in edge welding using a coaxial powder filler nozzle , 2001 .

[9]  M. Rappaz,et al.  A simple but realistic model for laser cladding , 1994 .

[10]  Jehnming Lin,et al.  A simple model of powder catchment in coaxial laser cladding , 1999 .

[11]  Ronald Guillén,et al.  Analysis and prediction of single laser tracks geometrical characteristics in coaxial laser cladding process , 2012 .

[12]  Godfrey C. Onwubolu,et al.  Prediction of clad angle in laser cladding by powder using response surface methodology and scatter search , 2007 .

[13]  A. Hoadley,et al.  Finite element simulation of laser surface treatments including convection in the melt pool , 1994 .

[14]  E. Toyserkani,et al.  3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process , 2004 .

[15]  V. Ocelík,et al.  Analysis of coaxial laser cladding processing conditions , 2005 .

[16]  Lin Li,et al.  Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances , 2004 .

[17]  L. Costa,et al.  A Simple Correlation Between the Geometry of Laser Cladding Tracks and the Process Parameters , 1996 .

[18]  S. Benayoun,et al.  Surface treatment of titanium by laser irradiation to improve resistance to dry-sliding friction , 1999 .

[19]  Lijun Li,et al.  Effects of powder concentration distribution on fabrication of thin-wall parts in coaxial laser cladding , 2005 .

[20]  Konstantinos Salonitis,et al.  An analytical model of the laser clad geometry , 2007 .

[21]  Jean-Yves Hascoët,et al.  Manufacturability analysis to combine additive and subtractive processes , 2010 .