Effects of SiC on the microstructures and mechanical properties of B4C–SiC–rGO composites prepared using spark plasma sintering

[1]  Z. Fu,et al.  Enhanced toughness and strength of boron carbide ceramics with reduced graphene oxide fabricated by hot pressing , 2020 .

[2]  A. L. Ortiz,et al.  Processing of orthotropic and isotropic superhard B4C composites reinforced with reduced graphene oxide , 2020 .

[3]  G. Subhash,et al.  Deformation behavior and amorphization in icosahedral boron-rich ceramics , 2020 .

[4]  Shi Tian,et al.  Microstructure and anisotropic mechanical properties of B6.5C-TiB2-SiC-BN composites fabricated by reactive hot pressing , 2020 .

[5]  Litian Hu,et al.  Bioinspired alumina/reduced graphene oxide fibrous monolithic ceramic and its fracture responses , 2020 .

[6]  Hyungsun Kim,et al.  Mechanical properties of B4C–SiC composites fabricated by hot-press sintering , 2020 .

[7]  Fu-chi Wang,et al.  Effect of sintering temperature on the mechanical properties and microstructures of pressureless-sintered B4C/SiC ceramic composite with carbon additive , 2020 .

[8]  B. Sheldon,et al.  Fracture, fatigue, and sliding-wear behavior of nanocomposites of alumina and reduced graphene-oxide , 2020 .

[9]  Z. Fu,et al.  Preparation and characterization of reduced graphene oxide-reinforced boron carbide ceramics by self-assembly polymerization and spark plasma sintering , 2020, Journal of the European Ceramic Society.

[10]  A. L. Ortiz,et al.  Highly sliding-wear resistant B4C composites fabricated by spark-plasma sintering with Ti–Al additives , 2020 .

[11]  Young‐Wook Kim,et al.  Highly electrically and thermally conductive silicon carbide-graphene composites with yttria and scandia additives , 2020 .

[12]  Chunyu Xu,et al.  Mechanical property and ballistic resistance of graphene platelets/B4C ceramic armor prepared by spark plasma sintering , 2019 .

[13]  E. Çevik,et al.  Microstructure and synergistic reinforcing activity of GNPs-B4C dual-micro and nano supplements in Al-Si matrix composites , 2019, Journal of Alloys and Compounds.

[14]  Ming Li,et al.  Reduced-graphene-oxide-reinforced boron carbide ceramics fabricated by spark plasma sintering from powder mixtures obtained by heterogeneous co-precipitation , 2019, Ceramics International.

[15]  Fu-chi Wang,et al.  Mechanical properties and microstructure evolution of pressureless-sintered B4C–SiC ceramic composite with CeO2 additive , 2019, Ceramics International.

[16]  Meinam Annebushan Singh,et al.  Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler , 2019, Journal of the European Ceramic Society.

[17]  S. R. Bakshi,et al.  Effect of graphene nano-platelet reinforcement on the mechanical properties of hot pressed boron carbide based composite , 2018, Ceramics International.

[18]  N. Glandut,et al.  An evaluation of the B4C formation in sintered ZrB2-SiC ceramic composites at 2100 °C , 2018 .

[19]  G. Hilmas,et al.  Titanium diboride–silicon carbide–boron carbide ceramics with super‐high hardness and strength , 2018 .

[20]  R. Haber,et al.  The effect of Si on the microstructure and mechanical properties of spark plasma sintered boron carbide , 2017 .

[21]  R. Young,et al.  Mechanical properties of graphene and graphene-based nanocomposites , 2017 .

[22]  A. Kovalčíková,et al.  Boron carbide/graphene platelet ceramics with improved fracture toughness and electrical conductivity , 2017 .

[23]  M. Belmonte,et al.  From bulk to cellular structures: A review on ceramic/graphene filler composites , 2017 .

[24]  C. Balázsi,et al.  Spark plasma sintering of graphene reinforced silicon carbide ceramics , 2017 .

[25]  Huajian Gao,et al.  Hardening and toughening mechanisms in nanotwinned ceramics , 2017 .

[26]  H. Che,et al.  Densification behaviour and mechanical properties of B4C–SiC intergranular/intragranular nanocomposites fabricated through spark plasma sintering assisted by mechanochemistry , 2017 .

[27]  Wei Liu,et al.  Effect of Ti content and stirring time on microstructure and mechanical behavior of Al-B4C composites , 2016 .

[28]  P. Rutkowski,et al.  Anisotropy in thermal properties of boron carbide–graphene platelet composites , 2016 .

[29]  Haibin Zhang,et al.  Electrically conductive graphene nanoplatelet/boron carbide composites with high hardness and toughness , 2016 .

[30]  Huajian Gao,et al.  Nanotwin-governed toughening mechanism in hierarchically structured biological materials , 2016, Nature Communications.

[31]  Yuan Wang,et al.  Enhancing Toughness in Boron Carbide with Reduced Graphene Oxide , 2016 .

[32]  A. Kovalčíková,et al.  Mechanical properties of boron carbide+graphene platelet composites , 2016 .

[33]  Weiwei Zhou,et al.  Control of doping by matrix in few-layer graphene/ metal oxide composites with highly enhanced electrical conductivity , 2015 .

[34]  S. Mao,et al.  Atomistic observation of a crack tip approaching coherent twin boundaries , 2014, Scientific Reports.

[35]  A. Hirata,et al.  Asymmetric twins in rhombohedral boron carbide , 2014 .

[36]  Hao Wang,et al.  Preparation of B4C–SiC composite ceramics through hot pressing assisted by mechanical alloying , 2013 .

[37]  A. Domínguez-Rodríguez,et al.  Toughening of super-hard ultra-fine grained B4C densified by spark-plasma sintering via SiC addition , 2013 .

[38]  R. Ruoff,et al.  High quality graphene sheets from graphene oxide by hot-pressing , 2013 .

[39]  C. Balázsi,et al.  Fracture toughness and toughening mechanisms in graphene platelet reinforced Si3N4 composites , 2012 .

[40]  J. Schoenung,et al.  Boundaries and interfaces in ultrafine grain composites , 2011 .

[41]  R. Haber,et al.  Boron Carbide: Structure, Properties, and Stability under Stress , 2011 .

[42]  W. Lu,et al.  Improved synthesis of graphene oxide. , 2010, ACS nano.

[43]  M. Dresselhaus,et al.  Perspectives on carbon nanotubes and graphene Raman spectroscopy. , 2010, Nano letters.

[44]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[45]  K. Novoselov,et al.  The Raman Fingerprint of Graphene , 2006, cond-mat/0606284.

[46]  K. Hemker,et al.  Shock-Induced Localized Amorphization in Boron Carbide , 2003, Science.

[47]  Milan Pophristic,et al.  Spatial characterization of doped SiC wafers by Raman spectroscopy , 1998 .

[48]  F. Thévenot,et al.  Boron carbide ― a comprehensive review , 1990 .

[49]  Campbell,et al.  Boron carbide structure by Raman spectroscopy. , 1989, Physical review. B, Condensed matter.

[50]  D. Hasselman,et al.  Evaluation ofKIc of brittle solids by the indentation method with low crack-to-indent ratios , 1982 .