On the delamination detection in composite beams with active piezoelectric sensors using non-linear ultrasonics

This paper investigates the potential of a novel SHM method for the detection of delamination cracks in composites which exploits the nonlinear ultrasonic response with in-situ d31 piezoceramic actuators and sensors. Composite beam specimens with artificially created delamination cracks are tested, entailing two piezoceramic actuator patches, the first to generate a low frequency, high power modal excitation and the second a high frequency acoustical wave, as well as a piezoceramic sensor. Nonlinearities induced at the high-frequency signal, such as sidebands at the spectral components as long as modulations at the measured sensory voltage are evaluated as damage indicators. Experimental results quantify the potential of the method in detecting small delamination cracks through spectral sideband components. The influence of high-frequency on the effectiveness of the method is shown. Additionally, the effect of the magnitude of applied voltage on the low frequency actuator on the formation of spectral components is investigated. Finally, the obtained results of the present method are compared with a guided wave based pitch and catch SHM method using the same actuator-sensor pair to excite and monitor the propagation of the first symmetric and asymmetric Lamb waves.

[1]  S. Rinderknecht,et al.  A FINITE ELEMENT MODEL FOR DELAMINATION IN COMPOSITE PLATES , 1995 .

[2]  Max Gunzburger,et al.  Vibration of delaminated composite plates and some applications to non-destructive testing , 1993 .

[3]  Dimitris A. Saravanos,et al.  High-frequency Dispersion Characteristics of Smart Delaminated Composite Beams , 2009 .

[4]  Constantinos Soutis,et al.  Piezoelectric transducer arrangement for the inspection of large composite structures , 2007 .

[5]  Fu-Kuo Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part I—Experiments and Analysis , 1995 .

[6]  Wieslaw J. Staszewski,et al.  Comparative study of nonlinear acoustic and Lamb wave techniques for fatigue crack detection in metallic structures , 2008 .

[7]  Alexander Sutin,et al.  Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing , 2001 .

[8]  V. Giurgiutiu.  Tuned Lamb Wave Excitation and Detection with Piezoelectric Wafer Active Sensors for Structural Health Monitoring , 2005 .

[9]  V. Giurgiutiu,et al.  In situ 2-D piezoelectric wafer active sensors arrays for guided wave damage detection. , 2008, Ultrasonics.

[10]  Constantinos Soutis,et al.  Non-destructive inspection of sandwich and repaired composite laminated structures , 2005 .

[11]  S. Hanagud,et al.  Delaminations in smart composite structures - A parametric study on vibrations , 1990 .

[12]  Wieslaw J. Staszewski,et al.  Structural Health Monitoring Using Guided Ultrasonic Waves , 2004 .

[13]  Dimitris A. Saravanos,et al.  EFFECTS OF DELAMINATIONS ON THE DAMPED DYNAMIC CHARACTERISTICS OF COMPOSITE LAMINATES: ANALYSIS AND EXPERIMENTS , 1996 .

[14]  W. Staszewski,et al.  Nonlinear acoustics with low-profile piezoceramic excitation for crack detection in metallic structures , 2006 .

[15]  Gerard C. Pardoen,et al.  Effect of Delamination on the Natural Frequencies of Composite Laminates , 1989 .

[16]  Constantinos Soutis,et al.  Damage detection in composite materials using lamb wave methods , 2002 .

[17]  A. Paolozzi,et al.  Detection of Debonding Damage in a Composite Plate through Natural Frequency Variations , 1990 .

[18]  J. E. Grady,et al.  Free vibrations of delaminated beams , 1991 .