An integrated automatic lab-in-syringe sol-gel coated foam microextraction platform as a front-end to high performance liquid chromatography for the migration studies of bisphenol A.
暂无分享,去创建一个
[1] Sujittra Poorahong,et al. Waste polystyrene foam-derived sorbent for determining bisphenol-A from canned beverages. , 2022, Food chemistry.
[2] Qionglin Liang,et al. One-step fabrication of COF-coated melamine sponge for in-syringe solid-phase extraction of active ingredients from traditional Chinese medicine in serum samples , 2022, Analytical and Bioanalytical Chemistry.
[3] K. Furton,et al. Dual Lab-in-Syringe Flow-Batch Platform for Automatic Fabric Disk Sorptive Extraction/Back-extraction as a Front End to Inductively Coupled Plasma Atomic Emission Spectrometry. , 2022, Analytical chemistry.
[4] F. Pena-Pereira,et al. The Ten Principles of Green Sample Preparation , 2022, TrAC Trends in Analytical Chemistry.
[5] K. Furton,et al. Development of highly hydrophobic fabric phase sorptive extraction membranes and exploring their applications for the rapid determination of tocopherols in edible oils analyzed by high pressure liquid chromatography-diode array detection. , 2021, Journal of chromatography. A.
[6] K. Furton,et al. Designing a moderately hydrophobic sol-gel monolithic Carbowax 20 M sorbent for the capsule phase microextraction of triazine herbicides from water samples prior to HPLC analysis. , 2021, Talanta.
[7] K. Furton,et al. Exploiting the capsule phase microextraction features in bioanalysis: extraction of ibuprofen from urine samples , 2021, Microchemical Journal.
[8] V. Samanidou,et al. Fabric Phase Sorptive Extraction: A Paradigm Shift Approach in Analytical and Bioanalytical Sample Preparation , 2021, Molecules.
[9] K. Furton,et al. Fabric-Phase Sorptive Membrane Array As a Noninvasive In Vivo Sampling Device For Human Exposure To Different Compounds , 2021, Analytical chemistry.
[10] P. Solich,et al. Lab-In-Syringe for automated double-stage sample preparation by coupling salting out liquid-liquid extraction with online solid-phase extraction and liquid chromatographic separation for sulfonamide antibiotics from urine. , 2021, Talanta.
[11] K. Furton,et al. A Novel Glass Fiber Coated with Sol–Gel Poly-Diphenylsiloxane Sorbent for the On-Line Determination of Toxic Metals Using Flow Injection Column Preconcentration Platform Coupled with Flame Atomic Absorption Spectrometry , 2020, Molecules.
[12] C. Stalikas,et al. Sponges and Sponge-Like Materials in Sample Preparation: A Journey from Past to Present and into the Future , 2020, Molecules.
[13] E. Simó-Alfonso,et al. 3D printed fluidic platform with in-situ covalently immobilized polymer monolithic column for automatic solid-phase extraction. , 2020, Analytica chimica acta.
[14] Burkhard Horstkotte,et al. The Automation Technique Lab-In-Syringe: A Practical Guide , 2020, Molecules.
[15] L. Hinojosa-Reyes,et al. Automated SPE-HPLC-UV methodology for the on-line determination of plasticisers in wastewater samples , 2020, International Journal of Environmental Analytical Chemistry.
[16] J. Erben,et al. 3D-printed magnetic stirring cages for semi-dispersive extraction of bisphenols from water using polymer micro- and nanofibers. , 2020, Analytical chemistry.
[17] Z. Hattab,et al. Synthesis of Polytetrahydrofuran Using Protonated Kaolin as A Solid Acid Catalyst , 2019, Bulletin of Chemical Reaction Engineering & Catalysis.
[18] V. Samanidou,et al. Synthesis of Graphene Oxide Based Sponges and Their Study as Sorbents for Sample Preparation of Cow Milk Prior to HPLC Determination of Sulfonamides , 2019, Molecules.
[19] A. Anthemidis,et al. Automatic pressure-assisted dual-headspace gas-liquid microextraction. Lab-in-syringe platform for membraneless gas separation of ammonia coupled with fluorimetric sequential injection analysis. , 2018, Analytica chimica acta.
[20] Martina Háková,et al. An on-line coupling of nanofibrous extraction with column-switching high performance liquid chromatography - A case study on the determination of bisphenol A in environmental water samples. , 2018, Talanta.
[21] P. Solich,et al. Online coupling of fully automatic in-syringe dispersive liquid-liquid microextraction with oxidative back-extraction to inductively coupled plasma spectrometry for sample clean-up in elemental analysis: A proof of concept. , 2017, Talanta.
[22] Irina Timofeeva,et al. On-line in-syringe sugaring-out liquid-liquid extraction coupled with HPLC-MS/MS for the determination of pesticides in fruit and berry juices. , 2017, Talanta.
[23] M. C. Ortiz,et al. Migration test of Bisphenol A from polycarbonate cups using excitation-emission fluorescence data with parallel factor analysis. , 2017, Talanta.
[24] S. M. Ghoreishi,et al. Hydrophobic magnetic montmorillonite composite material for the efficient adsorption and microextraction of bisphenol A from water samples , 2016 .
[25] A. Matin,et al. Development of Carbon Nanotube-Polyamide Nanocomposite-based Stir Bar Sorptive Extraction Coupled to HPLC-UV Applying Response Surface Methodology for the Analysis of Bisphenol A in Aqueous Samples. , 2016, Journal of chromatographic science.
[26] V. Cerdà,et al. In-syringe extraction using dissolvable layered double hydroxide-polymer sponges templated from hierarchically porous coordination polymers. , 2016, Journal of chromatography. A.
[27] V. Cerdà,et al. Automated solid-phase extraction of organic pollutants using melamine–formaldehyde polymer-derived carbon foams , 2016 .
[28] Víctor Cerdà,et al. Automatic In-Syringe Dispersive Microsolid Phase Extraction Using Magnetic Metal-Organic Frameworks. , 2015, Analytical chemistry.
[29] M. Hu,et al. Effects of Low-Dose Bisphenol A on DNA Damage and Proliferation of Breast Cells: The Role of c-Myc , 2015, Environmental health perspectives.
[30] J. Cho,et al. Preparation and characterization of polyurethane foam using a PLA/PEG polyol mixture , 2014, Fibers and Polymers.
[31] A. Anthemidis,et al. Automated headspace single-drop microextraction via a lab-in-syringe platform for mercury electrothermal atomic absorption spectrometric determination after in situ vapor generation , 2014 .
[32] M. Miró,et al. Integrated lab-in-syringe platform incorporating a membraneless gas-liquid separator for automatic cold vapor atomic absorption spectrometry. , 2013, Analytical chemistry.
[33] K. Furton,et al. Innovations in sol-gel microextraction phases for solvent-free sample preparation in analytical chemistry , 2013 .
[34] B. Rubin,et al. Bisphenol A: An endocrine disruptor with widespread exposure and multiple effects , 2011, The Journal of Steroid Biochemistry and Molecular Biology.
[35] M. de la Guardia,et al. Green Analytical Chemistry , 2008 .
[36] M. Moreno-Bondi,et al. Continuous solid-phase extraction and preconcentration of bisphenol A in aqueous samples using molecularly imprinted columns , 2004, Analytical and bioanalytical chemistry.
[37] G. Zachariadis,et al. On-line preconcentration and determination of copper, lead and chromium(VI) using unloaded polyurethane foam packed column by flame atomic absorption spectrometry in natural waters and biological samples. , 2002, Talanta.
[38] J. Płotka-Wasylka,et al. Complementary green analytical procedure index (ComplexGAPI) and software , 2021, Green Chemistry.
[39] Michal Alexovič,et al. Automation of dispersive liquid–liquid microextraction and related techniques. Approaches based on flow, batch, flow-batch and in-syringe modes , 2017 .