Overlay Control Requirements for Immersion Lithography
暂无分享,去创建一个
D. Tien | P. Izikson | M. Adel | B. Eichelberger | C.K. Huang | J.C. Robinson | P. Herrera
[1] Yuuki Ishii,et al. Improved overlay control through automated high order compensation , 2007, SPIE Advanced Lithography.
[2] William H. Arnold,et al. Metrology challenges of double exposure and double patterning , 2007, SPIE Advanced Lithography.
[3] Dongsub Choi,et al. Overlay improvement by nonlinear error correction and nonlinear error control by APC , 2006, SPIE Advanced Lithography.
[4] David Tien,et al. The challenges of transitioning from linear to high-order overlay control in advanced lithography , 2007, SPIE/COS Photonics Asia.
[5] Shinichi Nakajima,et al. Overlay improvement by using new framework of grid compensation for matching , 2006, SPIE Advanced Lithography.
[6] Jens Busch,et al. In-field overlay uncertainty contributors: a back end study , 2006, SPIE Advanced Lithography.
[7] Manabu Takakuwa,et al. Mix-and-match overlay method by compensating dynamic scan distortion error , 2004, SPIE Advanced Lithography.
[8] Chang-Moon Lim,et al. Hardware, materials, and parameters optimization for improvement of immersion overlay , 2007, SPIE Advanced Lithography.
[9] R. Seltmann,et al. In-chip overlay metrology in 90 nm production , 2005, ISSM 2005, IEEE International Symposium on Semiconductor Manufacturing, 2005..
[10] Chien-Jen Huang,et al. 45nm design rule in-die overlay metrology on immersion lithography processes , 2007, SPIE Advanced Lithography.