Coupling energy systems with lightweight structures for a net plus energy building

Future buildings will require significant performance improvements to adhere to greenhouse gas mitigation strategies. One method is to consider building components as multifunctional elements. These elements can perform several functions simultaneously, such as energy and structural aspects. As opposed to traditional sequential design in which each building element performs its own dedicated function. The former requires an integrated approach to prioritise the use of renewable energy sources and the reduction of materials. In this paper, we present three multifunctional elements: a lightweight shell roof, a funicular floor and an adaptive solar facade. We focus on the numerical simulation used to integrate thermally active building systems (TABS) and building integrated photovoltaics (BIPV) with lightweight structures. We outline a framework for the integration of the multifunctional element analysis with a dynamic building model and the performance factors of a district energy network. We exemplify the framework through the design of a real experimental building in Zurich, Switzerland. This delivered a net plus energy building (NPEB) with an annual weighted energy demand of 37.8kWh/m2a and a weighted energy surplus of 45%. The results demonstrate the enhanced performance in terms of operational and embodied emissions.

[1]  K. F. Fong,et al.  Towards net zero energy design for low-rise residential buildings in subtropical Hong Kong , 2012 .

[2]  J. C. Lam,et al.  Impact of climate change on building energy use in different climate zones and mitigation and adaptation implications , 2012 .

[3]  Carey J. Simonson,et al.  Expected energy and economic benefits, and environmental impacts for liquid-to-air membrane energy exchangers (LAMEEs) in HVAC systems: A review , 2014 .

[4]  Prageeth Jayathissa,et al.  Energy Performance of PV Modules as Adaptive Building Shading Systems , 2016 .

[5]  Carey J. Simonson,et al.  Research and applications of liquid-to-air membrane energy exchangers in building HVAC systems at University of Saskatchewan: A review , 2013 .

[6]  Fritz Sager,et al.  Can a policy program influence policy change? The case of the Swiss EnergieSchweiz program , 2014 .

[7]  R. Tscharner,et al.  Photovoltaic technology: the case for thin-film solar cells , 1999, Science.

[8]  Harald Drück,et al.  Development of Multifunctional Building Components (MultiKomp) – Comparison of Different Concepts , 2014 .

[9]  Anastasios I. Dounis,et al.  Advanced control systems engineering for energy and comfort management in a building environment--A review , 2009 .

[10]  Jan Hensen,et al.  Integrated building performance simulation: Progress, prospects and requirements , 2015 .

[11]  Carey J. Simonson,et al.  State-of-the-art in liquid-to-air membrane energy exchangers (LAMEEs): A comprehensive review , 2014 .

[12]  Hosny Z. Abou-Ziyan,et al.  Achieving annual and monthly net-zero energy of existing building in hot climate , 2016 .

[13]  F. Strebel,et al.  Inter-governmental institutions as promoters of energy policy diffusion in a federal setting , 2011 .

[14]  Rebecca J. Yang,et al.  Overcoming technical barriers and risks in the application of building integrated photovoltaics (BIPV): hardware and software strategies , 2015 .

[15]  Gerardo Maria Mauro,et al.  Multi-stage and multi-objective optimization for energy retrofitting a developed hospital reference building: A new approach to assess cost-optimality , 2016 .

[16]  B. Mathiesen,et al.  100% Renewable energy systems, climate mitigation and economic growth , 2011 .

[17]  E. Sardianou,et al.  Which factors affect the willingness of consumers to adopt renewable energies , 2013 .

[18]  Prageeth Jayathissa,et al.  The Adaptive Solar Facade: From concept to prototypes , 2016 .

[19]  Viktor Dorer,et al.  Application range of thermally activated building systems tabs , 2007 .

[20]  Shamil Naoum.  An overview into the concept of partnering , 2003 .

[21]  Joseph Virgone,et al.  Evaluation of thermal comfort using combined CFD and experimentation study in a test room equipped with a cooling ceiling , 2009 .

[22]  Shigeru Ban.  Museum of Paper Art , 2008 .

[23]  D. Robinson,et al.  Irradiation modelling made simple: the cumulative sky approach and its applications , 2004 .

[24]  Kristoffer Negendahl,et al.  Building performance simulation in the early design stage: An introduction to integrated dynamic models , 2015 .

[25]  Roberto Lollini,et al.  Nearly Zero, Net Zero, and Plus Energy Buildings – Theory, Terminology, Tools, and Examples , 2013 .

[26]  Tianzhen Hong,et al.  Occupant behavior modeling for building performance simulation: Current state and future challenges , 2015 .

[27]  Johan Driesen,et al.  Predetermined static configurations of a partially shaded photovoltaic module , 2017 .

[28]  Arno Schlueter,et al.  Illuminating adaptive comfort:dynamic lighting for the active occupant , 2014 .

[29]  Philippe Block,et al.  Prototype of an ultra-thin, concrete vaulted floor system , 2014 .

[30]  Dejan Mumovic,et al.  PERFORMANCE GAP AND THERMAL MODELLING: A COMPARISON OF SIMULATION RESULTS AND ACTUAL ENERGY PERFORMANCE FOR AN ACADEMY IN NORTH WEST ENGLAND , 2012 .

[31]  Viktor Dorer,et al.  Control of thermally activated building systems (TABS) in intermittent operation with pulse width modulation , 2009 .

[32]  Teresa McGrath,et al.  Net energy analysis of a solar combi system with Seasonal Thermal Energy Store , 2015 .

[33]  Arno Schlueter,et al.  SoRo-Track: A two-axis soft robotic platform for solar tracking and building-integrated photovoltaic applications , 2016, 2016 IEEE International Conference on Robotics and Automation (ICRA).

[34]  Iason Konstantzos,et al.  Occupant interactions with shading and lighting systems using different control interfaces: A pilot field study , 2016 .

[35]  Eddie Norman,et al.  Does CAD Really Encourage Creative Behaviors among its Users: A Case Study , 2012 .

[36]  Abel Groenewolt,et al.  Methods for modelling and analysis of bendable photovoltaic modules on irregularly curved surfaces , 2016 .

[37]  Adélio Rodrigues Gaspar,et al.  Evaluation of electrochromic windows impact in the energy performance of buildings in Mediterranean climates , 2014 .

[38]  Arno Schlueter,et al.  Occupant centered lighting control for comfort and energy efficient building operation , 2015 .

[39]  Arno Schlueter,et al.  Electrical Design and Layout Optimization of Flexible Thin-Film Photovoltaic Modules , 2016 .

[40]  David Gann,et al.  Building Innovation: Complex Constructs in a Changing World , 2000 .

[41]  S. Sorrell,et al.  Making the link: climate policy and the reform of the UK construction industry , 2003 .

[42]  Lei Yang,et al.  Reinforcement learning for optimal control of low exergy buildings , 2015 .

[43]  Patrik Thollander,et al.  An interdisciplinary perspective on industrial energy efficiency , 2010 .

[44]  Carey J. Simonson,et al.  Annual evaluation of energy, environmental and economic performances of a membrane liquid desiccant air conditioning system with/without ERV , 2014 .

[45]  Philippe Block,et al.  A Novel Form Finding Method for Fabric Formwork for Concrete Shells , 2010 .

[46]  Chris Deline,et al.  Use conditions and efficiency measurements of DC power optimizers for photovoltaic systems , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[47]  Jordan Geiger.  The Living: Surface Tensions , 2010 .

[48]  Michael Fastabend,et al.  ThyssenKrupp Headquarter in Verbundbauweise , 2010 .

[49]  Viktor Dorer,et al.  Thermally activated building systems (TABS): Energy efficiency as a function of control strategy, hydronic circuit topology and (cold) generation system , 2011 .

[50]  Arno Schlueter,et al.  Balancing operational and embodied emissions for the energy concept of an experimental research and living unit , 2015 .

[51]  Massimiliano Manfren,et al.  Thermal inertia and energy efficiency – Parametric simulation assessment on a calibrated case study , 2015 .

[52]  Constantinos A. Balaras,et al.  The role of thermal mass on the cooling load of buildings. An overview of computational methods , 1996 .

[53]  Jlm Jan Hensen,et al.  Climate adaptive building shells: state-of-the-art and future challenges , 2013 .

[54]  Thomas Feurer,et al.  Progress in thin film CIGS photovoltaics – Research and development, manufacturing, and applications , 2017 .

[55]  H. Krallmann,et al.  Process-oriented Knowledge Management within the Product Change Systems of the Automotive Industry , 2015 .

[56]  Craig P. Wray,et al.  Electricity production and cooling energy savings from installation of a building-integrated photovoltaic roof on an office building , 2013 .

[57]  Giuseppe Peter Vanoli,et al.  Optimization of building envelope design for nZEBs in Mediterranean climate: Performance analysis of residential case study , 2016 .

[58]  Andreas K. Athienitis,et al.  Experimental investigation of a two-inlet air-based building integrated photovoltaic/thermal (BIPV/T) system , 2015 .

[59]  Henrik Lund,et al.  Roles of local and national energy systems in the integration of renewable energy , 2016 .

[60]  R. Kannan,et al.  Alternative low-carbon electricity pathways in Switzerland and it’s neighbouring countries under a nuclear phase-out scenario , 2016 .

[61]  Zoltán Nagy,et al.  Parametric analysis and systems design of dynamic photovoltaic shading modules , 2015 .

[62]  Gregory J. Ward,et al.  The RADIANCE lighting simulation and rendering system , 1994, SIGGRAPH.

[63]  Anne Grete Hestnes,et al.  Energy use in the life cycle of conventional and low-energy buildings: A review article , 2007 .

[64]  Philippe Block,et al.  Design process for prototype concrete shells using a hybrid cable-net and fabric formwork , 2014 .