Revisiting Stimulation Mechanism at Fenton Hill and an Investigation of the Influence of Fault Heterogeneity on the Gutenberg-Richter b-value for Rate-and-State Earthquake Simulations

In this work, we developed a numerical modeling framework for application to subsurface reservoir engineering problems related to fluid flow, heat transfer, and mechanical deformation in fractured porous media. An existing reservoir simulator was extended to include poroelastic and thermoelastic effects. We introduced a novel approach to couple poroelastic and thermoelastic stresses with fracture deformation calculations. In addition, we implemented a rate-and-state friction model capable of describing the earthquake rupture process on two-dimensional heterogeneous fault surfaces. A spatial random field model was used to generate heterogeneous, spatially correlated, fractal distributions of fault properties such as stress, friction, and permeability. We applied the numerical model to investigate reservoir stimulation efforts at the Fenton Hill enhanced geothermal system test site. A geologic conceptual model of the site was developed based on several independent datasets. Several scenarios were simulated to isolate the roles of fluid pressurization of the fractures, poroelastic stress, and thermal stress. Comparing the simulation results with the actual earthquake catalog data indicates that poroelastic and thermoelastic effects likely did play a role during the Fenton Hill stimulation treatments. Our analysis also suggests that shear stimulation did not contribute to enhanced permeability at the Fenton Hill reservoir. In another study, we hypothesized that by introducing heterogeneous and spatially correlated patterns of fault properties, it would be possible to simulate earthquake sequences that exhibit power law scaling of frequency-magnitude distributions using a rate-and-state friction model. We examined the influence of heterogeneous distributions of initial shear stress, initial normal stress, dynamic friction coefficient, and permeability. Our model was able to simulate earthquake sequences exhibiting Gutenberg-Richter-type frequencymagnitude distributions with b-values close to 1 when the fault had heterogeneous stress or friction. Permeability heterogeneity did not have an effect. This study has implications for understanding how the Gutenberg-Richter b-value is influenced by natural geologic conditions and injection well operations.

[1]  Anna H. Olsen,et al.  The 2014 United States National Seismic Hazard Model , 2015 .

[2]  Nicholas J. Gianoutsos,et al.  Underpressure in Mesozoic and Paleozoic rock units in the Midcontinent of the United States , 2015 .

[3]  Jeremy E. Kozdon,et al.  Earthquake Ruptures with Strongly Rate-Weakening Friction and Off-Fault Plasticity : 2 . Nonplanar Faults , 2010 .

[4]  E. Dunham,et al.  Additional shear resistance from fault roughness and stress levels on geometrically complex faults , 2013 .

[5]  J. Rice,et al.  Earthquake ruptures with thermal weakening and the operation of major faults at low overall stress levels , 2009 .

[6]  J. D. Eshelby The elastic field of a crack extending non-uniformly under general anti-plane loading , 1969 .

[7]  N. Watanabe,et al.  Beyond‐laboratory‐scale prediction for channeling flows through subsurface rock fractures with heterogeneous aperture distributions revealed by laboratory evaluation , 2015 .

[8]  D. J. Andrews,et al.  A stochastic fault model: 1. Static case , 1980 .

[10]  Andrew M. Bradley,et al.  Software for Efficient Static Dislocation- Traction Calculations in Fault Simulators , 2014 .

[11]  D. W. Brown,et al.  The potential for large errors in the inferred minimum earth stress when using incomplete hydraulic fracturing results , 1989 .

[12]  R. Horne,et al.  Discrete Fracture Network Modeling of Hydraulic Stimulation: Coupling Flow and Geomechanics , 2013 .

[13]  Luis A. Dalguer,et al.  Finite difference modelling of rupture propagation with strong velocity-weakening friction , 2009 .

[14]  Valentin Gischig Rupture propagation behavior and the largest possible earthquake induced by fluid injection into deep reservoirs , 2015 .

[15]  Sogo Shiozawa,et al.  Fully Coupled Hydromechanical Simulation of Hydraulic Fracturing in 3D Discrete-Fracture Networks , 2016 .

[16]  J. Rice,et al.  Rate and state dependent friction and the stability of sliding between elastically deformable solids , 2001 .

[17]  E. Dunham,et al.  Earthquake Ruptures with Strongly Rate-Weakening Friction and Off-Fault Plasticity, Part 1: Planar Faults , 2011 .

[18]  J. Dieterich,et al.  Modeling injection-induced seismicity with the physics-based earthquake simulator RSQSim , 2015 .

[19]  R. Horne,et al.  Physical Mechanisms Related to Microseismic-Depletion-Delineation Field Tests With Application to Reservoir Surveillance , 2016 .

[20]  R. Horne,et al.  Investigation of injection-induced seismicity using a coupled fluid flow and rate/state friction model , 2011 .

[21]  Richard F. Voss,et al.  Fractals in nature: from characterization to simulation , 1988 .

[22]  G. Beroza,et al.  A spatial random field model to characterize complexity in earthquake slip , 2002 .

[23]  R. Horne,et al.  An embedded fracture modeling framework for simulation of hydraulic fracturing and shear stimulation , 2016, Computational Geosciences.

[24]  Sumit Purohit,et al.  Using GTO-Velo to Facilitate Communication and Sharing of Simulation Results in Support of the Geothermal Technologies Office Code Comparison Study , 2015 .

[25]  K. Aki,et al.  Fractal geometry in the San Andreas Fault System , 1987 .

[26]  X. Weng,et al.  Modeling of Hydraulic Fracture Network Propagation in a Naturally Fractured Formation , 2011 .

[27]  Roland N. Horne,et al.  An investigation of stimulation mechanisms in Enhanced Geothermal Systems , 2014 .

[28]  Vivi Thomas Hriscu,et al.  Mining the Earth's Heat: Hot Dry Rock Geothermal Energy , 2012 .

[29]  Mark D. Zoback,et al.  In-situ stress orientation and magnitude at the Fenton Geothermal Site, New Mexico, determined from , 1988 .